Covulcanization of LLDPE/EMA blends using dicumyl peroxide

Thermodynamic Compatibility, Crystallizability, Thermal, Mechanical Properties and Oil Resistance Characteristics of Nanostructure Poly (ethylene-co-methyl acrylate)/Poly(acrylonitrile-co-butadiene) Blends

This paper addresses the compatibility, morphological characteristics, crystallization, physico-mechanical properties and thermal stability of the melt mixed EMA/NBR blends. FTIR spectroscopy reveals considerable physical interaction between the polymers that explain the compatibility of the blends. DSC results confirm the same (compatibility) and reveals that NBR hinders EMA crystallization. Mechanical and thermal properties of the prepared EMA/NBR blends notably enhance with increasing the fraction of EMA in the blends. Morphology study exhibit the dispersed particles in spherical shape in the nanometer level. Swelling and oil resistance study have also been carried out in details to understand the performance behaviour of these blends at service condition

Ethylene Methyl Acrylate Copolymer Toughened Poly(lactic acid) Blends: Phase Morphologies, Mechanical and Rheological Properties

The ethylene methyl acrylate copolymer (EMA), for the first time, was melt blended with poly(lactic acid) (PLA) by a twin-screw extruder to toughen PLA. The phase morphologies, mechanical, and rheological properties of the PLA/EMA blends with six weight ratios were investigated. The results showed that the addition of EMA improves the toughness of PLA at the expense of the tensile strength, flexural strength and modulus to a certain degree, and results in the transition from brittle fracture of PLA into ductile fracture. The droplet-matrix morphology is observed in the PLA/EMA blends, in which the mean diameter of EMA droplets increases and its distribution widens gradually with increasing the EMA content. The PLA/EMA blends with three weight ratios (90/10, 80/20, and 70/30) display different characteristic linear viscoelastic properties in the low frequency region, which were investigated in terms of their complex viscosity, storage modulus, and Cole-Cole plots. The interfacial tension between the PLA and EMA is calculated using the Palierne model conducted on the 80/20 PLA/EMA blend, and the calculated result is 3.3 mN/m.