Multifunctionality of poly(vinyl alcohol) nanofiber webs containing titanium dioxide

Use of Electrospinning for Sustainable Production of Nanofibers: A Comparative Assessment of Smart Textiles-Related Applications

Textile production is a major component of the global industry, with sales of over USD 450 billion and estimations of an 84% increase in their demand in the next 20 years. In recent decades, protective and smart textiles have played important roles in the social economy and attracted widespread popularity thanks to their wide spectrum of applications with properties, such as antimicrobial, water-repellent, UV, chemical, and thermal protection. Towards the sustainable manufacturing of smart textiles, biodegradable, recycled, and bio-based plastics are used as alternative raw materials for fabric and yarn production using a wide variety of techniques. While conventional techniques present several drawbacks, nanofibers produced through electrospinning have superior structural properties. Electrospinning is an innovative method for fiber production based on the use of electrostatic force to create charged threads of polymer solutions. Electrospinning shows great potential since it provides control of the size, porosity, and mechanical resistance of the fibers. This review summarizes the advances in the rapidly evolving field of the production of nanofibers for application in smart and protective textiles using electrospinning and environmentally friendly polymers as raw materials, and provides research directions for optimized smart fibers in the future.

Recent Development of Polyhydroxyalkanoates (PHA)-Based Materials for Antibacterial Applications: A Review

The diseases caused by microorganisms are innumerable existing on this planet. Nevertheless, increasing antimicrobial resistance has become an urgent global challenge. Thus, in recent decades, bactericidal materials have been considered promising candidates to combat bacterial pathogens. Recently, polyhydroxyalkanoates (PHAs) have been used as green and biodegradable materials in various promising alternative applications, especially in healthcare for antiviral or antiviral purposes. However, it lacks a systematic review of the recent application of this emerging material for antibacterial applications. Therefore, the ultimate goal of this review is to provide a critical review of the state of the art recent development of PHA biopolymers in terms of cutting-edge production technologies as well as promising application fields. In addition, special attention was given to collecting scientific information on antibacterial agents that can potentially be incorporated into PHA materials for biological and durable antimicrobial protection. Furthermore, the current research gaps are declared, and future research perspectives are proposed to better understand the properties of these biopolymers as well as their possible applications.

Electrospun Polymer Nanofibers with Antimicrobial Activity

Nowadays, nanofibers with antimicrobial activity are of great importance due to the widespread antibiotic resistance of many pathogens. Electrospinning is a versatile method of producing ultrathin fibers with desired properties, and this technique can be optimized by controlling parameters such as solution/melt viscosity, feeding rate, and electric field. High viscosity and slow feeding rate cause blockage of the spinneret, while low viscosity and high feeding rate result in fiber discontinuities or droplet formation. The electric field must be properly set because high field strength shortens the solidification time of the fluid streams, while low field strength is unable to form the Taylor cone. Environmental conditions, temperature, and humidity also affect electrospinning. In recent years, significant advances have been made in the development of electrospinning methods and the engineering of electrospun nanofibers for various applications. This review discusses the current research on the use of electrospinning to fabricate composite polymer fibers with antimicrobial properties by incorporating well-defined antimicrobial nanoparticles (silver, titanium dioxide, zinc dioxide, copper oxide, etc.), encapsulating classical therapeutic agents (antibiotics), plant-based bioactive agents (crude extracts, essential oils), and pure compounds (antimicrobial peptides, photosensitizers) in polymer nanofibers with controlled release and anti-degradation protection. The analyzed works prove that the electrospinning process is an effective strategy for the formation of antimicrobial fibers for the biomedicine, pharmacy, and food industry.

Sol-Gel-Derived Fibers Based on Amorphous α-Hydroxy-Carboxylate-Modified Titanium(IV) Oxide as a 3-Dimensional Scaffold

The development of novel fibrous biomaterials and further processing of medical devices is still challenging. For instance, titanium(IV) oxide is a well-established biocompatible material, and the synthesis of TiO_x particles and coatings via the sol-gel process has frequently been published. However, synthesis protocols of sol-gel-derived TiO_x fibers are hardly known. In this publication, the authors present a synthesis and fabrication of purely sol-gel-derived TiO_x fiber fleeces starting from the liquid sol-gel precursor titanium ethylate (TEOT). Here, the α-hydroxy-carboxylic acid lactic acid (LA) was used as a chelating ligand to reduce the reactivity towards hydrolysis of TEOT enabling a spinnable sol. The resulting fibers were processed into a non-woven fleece, characterized with FTIR, ¹³C-MAS-NMR, XRD, and screened with regard to their stability in physiological solution. They revealed an unexpected dependency between the LA content and the dissolution behavior. Finally, in vitro cell culture experiments proved their potential suitability as an open-mesh structured scaffold material, even for challenging applications such as therapeutic medicinal products (ATMPs).

TiO2 Nanoparticle-Loaded Poly(NIPA-co-NMA) Fiber Web for the Adsorption and Photocatalytic Degradation of 4-Isopropylphenol

A TiO₂ nanoparticle-loaded polymer fiber web was developed as a functional material with the ability to adsorb and photo-catalytically degrade organic pollutants in aquatic media. A linear copolymer of N-isopropylacrylamide (primary component) and N-methylol acrylamide (poly(NIPA-co-NMA)) was prepared, and composite fibers were fabricated by electrospinning a methanol suspension containing the copolymer and commercially available TiO₂ nanoparticles. The crosslinking of the polymer via the formation of methylene bridges between NMA units was accomplished by heating, and the fiber morphology was analyzed by electron microscopy. 4-Isopropylphenol generated by the degradation of bisphenol A—one of the endocrine-disrupting chemicals—was used as the model organic pollutant. As poly(NIPA) is a thermosensitive polymer that undergoes hydrophilic/hydrophobic transition in water, the temperature-dependence of the adsorption and photocatalytic degradation of 4-isopropylphenol was investigated. The degradation rate was analyzed using a pseudo-first-order kinetic model to obtain the apparent reaction rate constant, k_app. The enhancement of the photocatalytic degradation rate owing to the adsorption of 4-isopropylphenol onto thermosensitive poly(NIPA)-based fibers is discussed in terms of the ratio of the k_app of the composite fiber to that of unsupported TiO₂ nanoparticles. Based on the results, an eco-friendly wastewater treatment process involving periodically alternated adsorption and photocatalytic degradation is proposed.

Synthesis and Transformation of Hollow Rutile Titania Wires by Single Spinneret Electrospinning with Sol-Gel Chemistry

The work described below was carried out to understand how to control the morphology of nanostructured titania calcined from electrospun nanofibers. This is the first report of hollow rutile nanofibers synthesized from electrospun nanofibers with short calcination time. Titanium isopropoxide was incorporated into the nanofibers as the titania precursor. The electrospinning technique was used to fabricate ceramic/polymer hybrid nanofibers. The electrospun nanofibers were then calcined to produce rutile titania nanofibers with different morphologies (hollow or solid nanofibers), which were characterized by SEM and TEM. The initial concentration of ceramic precursor and the calcination time were shown to control the morphology of the nanofiber. The hollow morphology was only obtained with a concentration of the precursor within a certain level and with short calcination times. The heat treatment profile contributed to particle growth. At longer times, the particle growth led to the closure of the hollow core and all the nanofibers resembled strings of solid particles. A formation mechanism for the hollow nanofibers is also proposed.

Novel Antibacterial and Toughened Carbon-Fibre/Epoxy Composites by the Incorporation of TiO2 Nanoparticles Modified Electrospun Nanofibre Veils

The inclusion of electrospun nanofiber veils was revealed as an effective method for enhancing the mechanical properties of fiber-reinforced epoxy resin composites. These veils will eventually allow the incorporation of nanomaterials not only for mechanical reinforcement but also in multifunctional applications. Therefore, this paper investigates the effect of electrospun nanofibrous veils made of polyamide 6 modified with TiO2 nanoparticles on the mechanical properties of a carbon-fiber/epoxy composite. The nanofibers were included in the carbon-fiber/epoxy composite as a single structure. The effect of positioning these veils in different composite positions was investigated. Compared to the reference, the use of unmodified and TiO2 modified veils increased the flexural stress at failure and the fracture toughness of composites. When TiO2 modified veils were incorporated, new antibacterial properties were achieved due to the photocatalytic properties of the veils, widening the application area of these composites.

TiO2-Doped Electrospun Nanofibrous Membrane for Photocatalytic Water Treatment

This work has been focused on the one-step fabrication by electrospinning of polyamide 6 (PA6) nanofibre membranes modified with titanium dioxide nanoparticles (TiO₂), where these TiO₂ nanoparticles aggregates could induce a photocatalytic activity. The main potential application of these membranes could be the purification of contaminated water. Thus, it is important to analyse the contaminant degradation capability since in these membranes this is based on their photocatalytic activity. In this work, the effect of the photocatalysis has been studied both on the degradation of an organic model contaminant and on the removal of Escherichia coli and other coliform bacteria. As a result, it was observed that these membranes present excellent photocatalytic activity when they are irradiated under UV light, allowing a 70% reduction of an organic model pollutant after 240 min. In addition, these membranes successfully removed Escherichia coli and other coliform bacteria in artificially inoculated water after 24 h of contact with them. Moreover, the stand-alone structure of the membranes allowed for the reusing of the immobilized catalyst. The experimental evidence indicated that developed nanofibre membranes are a fast and efficient solution for polluted water decontamination based on photocatalysis. Their use could contribute to guarantee a fresh water level and quality, mitigating the water scarcity problem worldwide.

Electrospun nanofibers for wound healing

Electrospinning has been widely used as a nanofiber fabrication technique. Its simple process, cost effectiveness and versatility have appealed to materials scientists globally. Pristine polymeric nanofibers or composite nanofibers with dissimilar morphologies and multidimensional assemblies ranging from one dimension (1D) to three dimensions (3D) can be obtained from electrospinning. Critically, these as-prepared nanofibers possessing high surface area to volume ratio, tunable porosity and facile surface functionalization present numerous possibilities for applications, particularly in biomedical field. This review gives us an overview of some recent advances of electrospinning-based nanomaterials in biomedical applications such as antibacterial mats, patches for rapid hemostasis, wound dressings, drug delivery systems, as well as tissue engineering. We further highlight the current challenges and future perspectives of electrospinning-based nanomaterials in the field of biomedicine.

Nanostructured poly (lactic acid) electrospun fiber with high loadings of TiO2 nanoparticles: Insights into bactericidal activity and cell viability

Researchers have been looking for modifying surfaces of polymeric biomaterials approved by FDA to obtain nanofeatures and bactericidal properties. If modified, it would be very interesting because the antibiotic administration could be reduced and, therefore, the bacterial resistance. Here, we report the electrospinning of poly (lactic acid) (PLA) with high loadings of titanium dioxide nanoparticles (TiO₂, 1-5wt%) and their bactericidal properties. TiO₂ nanoparticles have been recognized for a long time for their antibacterial, low cost and self-cleaning properties. However, their ability to reduce bacteria functions when used in polymers has not been well studied to date. In this context, we aimed here to generate nanostructured PLA electrospun fiber-TiO₂ nanoparticle composites for further evaluation of their bactericidal activity and cell viability. TEM and SEM micrographs revealed the successful electrospinning of PLA/TiO₂ and the generation of polymer-TiO₂ nanostructures. When increasing the TiO₂ concentration, we observed a proportional increase in the nanoparticle density along the fiber and surface. The nanostructured PLA/TiO₂ nanofibers showed no mammalian cell toxicity and, most importantly, possessed bactericidal activity with higher TiO₂ loads. Such results suggest that the present PLA electrospun fiber-TiO₂ nanoparticle composites should be further studied for a wide range of biomedical applications.

Safety Profile of TiO₂-Based Photocatalytic Nanofabrics for Indoor Formaldehyde Degradation

Anatase TiO₂ nanoparticles (TNPs) are synthesized using the sol-gel method and loaded onto the surface of polyester-cotton (65/35) fabrics. The nanofabrics degrade formaldehyde at an efficiency of 77% in eight hours with visible light irradiation or 97% with UV light. The loaded TNPs display very little release from nanofabrics (~0.0%) during a standard fastness to rubbing test. Assuming TNPs may fall off nanofabrics during their life cycles, we also examine the possible toxicity of TNPs to human cells. We found that up to a concentration of 220 μg/mL, they do not affect viability of human acute monocytic leukemia cell line THP-1 macrophages and human liver and kidney cells.

Robust electrospinning cellulose acetate@TiO2 ultrafine fibers for dyeing water treatment by photocatalytic reactions

Cellulose acetate (CA) composite ultrafine fibers containing different TiO₂ nanoparticle (NP) contents were synthesized via electrospinning for effective dyeing water treatment.

Controlled surface mineralization of metal oxides on nanofibers

Metal oxide/polymer hybrid nanofibers are prepared by in situ formation of metal oxide nanoparticles on surface-functionalized polymer fibers.

Electrospun antibacterial nanofibrous polyvinylpyrrolidone/cetyltrimethylammonium bromide membranes for biomedical applications

Nanoscale structures with large surface area-to-volume ratios are used as biomaterial scaffolds for vascular grafts, wound dressings, and air purifying filters. Using electrospinning, nanofibers containing an antibacterial agent, cetyltrimethylammonium bromide, were prepared for wound healing application. Polyvinylpyrrolidone, known as a biocompatible additive in food and drug industries, has been used as fiber processing agent with the organic active ingredient, cetyltrimethylammonium bromide. A series of samples with different polyvinylpyrrolidone/ cetyltrimethylammonium bromide ratios were successfully prepared by this method. The morphology and electroactive characteristics of nanofibers were investigated using scanning electron microscopy, atomic force microscopy, and electrochemical impedance spectroscopy. Fiber diameters and charge transfer resistances were found to decrease with salt content, while the double-layer capacitance increased with no apparent effect on the specific capacitance providing favorable conditions for the fabrication of biomaterials. In addition, the quaternary ammonium compound (cetyltrimethylammonium bromide) with a minimum ratio of 2.5 wt% showed reduction in bacterial activity of Klebsiella pneumonia, Staphylococcus aureus, and Escherichia coli.