pH-responsive poly(DMAPMA-co-HEMA)-based hydrogels for prolonged release of 5-fluorouracil

Stimuli-responsive biomaterials: smart avenue toward 4D bioprinting

3D bioprinting is an advanced technology combining cells and bioactive molecules within a single bioscaffold; however, this scaffold cannot change, modify or grow in response to a dynamic implemented environment. Lately, a new era of smart polymers and hydrogels has emerged, which can add another dimension, e.g., time to 3D bioprinting, to address some of the current approaches' limitations. This concept is indicated as 4D bioprinting. This approach may assist in fabricating tissue-like structures with a configuration and function that mimic the natural tissue. These scaffolds can change and reform as the tissue are transformed with the potential of specific drug or biomolecules released for various biomedical applications, such as biosensing, wound healing, soft robotics, drug delivery, and tissue engineering, though 4D bioprinting is still in its early stages and more works are required to advance it. In this review article, the critical challenge in the field of 4D bioprinting and transformations from 3D bioprinting to 4D phases is reviewed. Also, the mechanistic aspects from the chemistry and material science point of view are discussed too.

The Influence of Synthesis Method on Characteristics of Buffer and Organic Solutions of Thermo- and pH-Responsive Poly(N-[3-(diethylamino)propyl]methacrylamide)s

Thermo- and pH-responsive poly(N-[3-(diethylamino)propyl]methacrylamide)s were synthesized by free radical polymerization and RAFT polymerization. The molar masses of the samples were 33,000–35,000 g∙mol⁻¹. Investigations of the dilute solutions showed that the prepared samples were flexible chain polymers. The behavior of the synthesized polymers in the buffer solutions was analyzed by turbidity and light scattering at a pH range of 7–13 and a concentration range of 0.0002–0.008 g·cm⁻³. When the concentrated solutions were at a low temperature, there were macromolecules and aggregates, which were formed due to the interaction of hydrophobic units. For the investigated samples, the lower critical solution temperatures were equal. The phase separation temperatures decreased as pH increased. The influence of polydispersity index on the characteristics of the samples in the solutions was analyzed. The radii of molecules of poly(N-[3-(diethylamino)propyl]methacrylamide) obtained by RAFT polymerization at this temperature at the onset and end of the phase separation interval were lower than ones for samples synthesized by conventional free radical polymerization.

Four-Dimensional (Bio-)printing: A Review on Stimuli-Responsive Mechanisms and Their Biomedical Suitability

The applications of tissue engineered constructs have witnessed great advances in the last few years, as advanced fabrication techniques have enabled promising approaches to develop structures and devices for biomedical uses. (Bio-)printing, including both plain material and cell/material printing, offers remarkable advantages and versatility to produce multilateral and cell-laden tissue constructs; however, it has often revealed to be insufficient to fulfill clinical needs. Indeed, three-dimensional (3D) (bio-)printing does not provide one critical element, fundamental to mimic native live tissues, i.e., the ability to change shape/properties with time to respond to microenvironmental stimuli in a personalized manner. This capability is in charge of the so-called “smart materials”; thus, 3D (bio-)printing these biomaterials is a possible way to reach four-dimensional (4D) (bio-)printing. We present a comprehensive review on stimuli-responsive materials to produce scaffolds and constructs via additive manufacturing techniques, aiming to obtain constructs that closely mimic the dynamics of native tissues. Our work deploys the advantages and drawbacks of the mechanisms used to produce stimuli-responsive constructs, using a classification based on the target stimulus: humidity, temperature, electricity, magnetism, light, pH, among others. A deep understanding of biomaterial properties, the scaffolding technologies, and the implant site microenvironment would help the design of innovative devices suitable and valuable for many biomedical applications.

Characterization of methacrylated polysaccharides in combination with amine-based monomers for application in mortar

Smart pH-responsive superabsorbent polymers (SAPs) could be useful for self-healing of cracks in mortar. They will swell minimally during the alkaline conditions of mixing, leading to only small macro-pores but will swell stronger with a lower pH when water enters the cracks. As such, polysaccharides (alginate, chitosan and agarose) were methacrylated and cross-linked with amine-based monomers (dimethylaminoethyl methacrylate and dimethylaminopropyl methacrylamide) to induce a varying pH-sensitivity. These materials showed a strong cross-linking efficiency and induced moisture uptake capacities up to 122% at 95% relative humidity with a negligible hysteresis. Additionally, interesting pH-responsive swelling capacities were obtained, especially for SAPs based on chitosan and agarose with values up to 110gwater/gSAP. Most of these materials showed limited hydrolysis in cement filtrate solutions, making them very promising for use in mortar.

Physically cross-linked pH-responsive chitosan-based hydrogels with enhanced mechanical performance for controlled drug delivery

A novel physically cross-linked pH-responsive hydrogel with enhanced mechanical performance was prepared from chitosan, acrylic acid and (2-dimethylamino) ethyl methacrylate via in situ free radical polymerization for controlled drug delivery.

Antioxidant Properties of 2-Hydroxyethyl Methacrylate-Based Copolymers with Incorporated Sterically Hindered Amine

A series of model linear copolymers of 2-hydroxyethyl methacrylate (HEMA) and a sterically hindered amine derivative [N-(2,2,6,6-tetramethyl-piperidin-4-yl)methacrylamide (HAS)] were synthesized and characterized. Scavenging activities of the copolymers against reactive oxygen species (peroxyl and hydroxyl radicals) and 2,2-diphenyl-1-picrylhydrazyl (DPPH) radicals were determined. It was found that copolymers with medium HAS content (3.5-4.0 mol %) were better scavengers than copolymers with lower and higher HAS content and also than polyHEMA and polyHAS homopolymers and the HAS monomer. Importantly, these copolymers compared favorably even to established low-molecular weight antioxidant standards (BHA and dexpanthenol). Monomer reactivity ratios were determined, and the microstructure of the copolymers was assessed. Subsequently, cross-linked copolymers in the powder and film forms with optimal HAS content were synthesized. Their scavenging activities against the three types of radicals were determined, revealing that these hydrogels are potent scavengers of reactive oxygen species.

pH dependent poly[2-(methacryloyloxyethyl)trimetylammonium chloride-co-methacrylic acid]hydrogels for enhanced targeted delivery of 5-fluorouracil in colon cancer cells

Stimuli responsive hydrogels have shown enormous potential as a carrier for targeted drug delivery. In this study we have developed novel pH responsive hydrogels for the delivery of 5-fluorouracil (5-FU) in order to alleviate its antitumor activity while reducing its toxicity. We used 2-(methacryloyloxyethyl) trimetylammonium chloride a positively charged monomer and methacrylic acid for fabricating the pH responsive hydrogels. The released 5-FU from all except hydrogel (GEL-5) remained biologically active against human colon cancer cell lines [HT29 (IC50 = 110-190 μg ml(-1)) and HCT116 (IC50 = 210-390 μg ml(-1))] but not human skin fibroblast cells [BJ (CRL2522); IC50 ≥ 1000 μg ml(-1)]. This implies that the copolymer hydrogels (1-4) were able to release 5-FU effectively to colon cancer cells but not normal human skin fibroblast cells. This is probably due to the shorter doubling time that results in reduced pH in colon cancer cells when compared to fibroblast cells. These pH sensitive hydrogels showed well defined cell apoptosis in HCT116 cells through series of events such as chromatin condensation, membrane blebbing, and formation of apoptotic bodies. No cell killing was observed in the case of blank hydrogels. The results showed the potential of these stimuli responsive polymer hydrogels as a carrier for colon cancer delivery.

Adsorption and release of active species into and from multifunctional ionic microgel particles

We synthesize monodisperse ionic microgel particles which undergo a large change in volume in response to environmental stimuli such as pH and temperature. In addition, the study elucidates the effective uptake and release of rheology modifiers from these microgel particles to alter the bulk viscosity of a surrounding fluid. Moreover, we found that the prepared ionic microgel particles can demonstrate abilities to adsorb and repel iron oxide nanoparticles (Fe3O4-NPs) upon pH variation. The extent of the loading of Fe3O4-NPs within the colloidal particles and morphology can be manipulated by tunable interactions between the Fe3O4-NPs and ionic microgel particles.