Effects of Room Temperature Stretching and Annealing on the Crystallization Behavior and Performance of Polyvinylidene Fluoride Hollow Fiber Membranes

A treatment consisting of room temperature stretching and subsequent annealing was utilized to regulate the morphology and performance of polyvinylidene fluoride (PVDF) hollow fiber membranes. The effects of stretching ratios and stretching rates on the crystallization behavior, morphology, and performance of the PVDF membranes were investigated. The results showed that the treatment resulted in generation of the β crystalline phase PVDF and increased the crystallinity of the membrane materials. The treatment also brought about the orientation of the membrane pores along the stretching direction and led to an increase in the mean pore size of the membranes. In addition, as the stretching ratio increased, the tensile strength and permeation flux were improved while the elongation at break was depressed. However, compared to the stretching ratio, the stretching rate had less influence on the membrane structure and performance. In general, as the stretching ratio was 50% and the stretching rate was 20 mm/min, the tensile strength was increased by 36% to 7.47 MPa, and the pure water flux was as high as 776.28 L/(m²·h·0.1bar), while the mean pore size was not changed significantly. This research proved that the room temperature stretching and subsequent annealing was a simple but effective method for regulating the structure and the performance of the PVDF porous membranes.

An ultra-thin carbon-fabric/graphene/poly(vinylidene fluoride) film for enhanced electromagnetic interference shielding

Highly conductive carbon-based fibrous composites have become one of the most sought-after components in the field of electromagnetic interference (EMI) shielding due to their excellent comprehensive performance. In this work, a flexible nonwoven fabric consisting of carbon fibers (CFs) and polypropylene/polyethylene (PP/PE) core/sheath bicomponent fibers (ESFs), known as CEF-NF, is introduced into the graphene (GE)/poly(vinylidene fluoride) (PVDF) nanocomposite obtained by a solution casting method to fabricate a CEF-NF/GE/PVDF film. Disparate microstructures can be clearly observed in CEF-NF/GE/PVDF films with different graphene contents. Thanks to an internal porous network structure formed when the graphene content is high, this film exhibits better electrical conductivity. In the frequency range of 30-1500 MHz, this film can achieve a significantly high EMI shielding effectiveness (EMI-SE) value of about 48.5 dB at tiny thickness and density (1731.40 dB cm² g^-1), which are far better than many competitive materials. Moreover, this film exhibits adequate tensile strength and excellent flexibility, as the film's structural form can be retained even after multiple folding processes. In addition, by combining two-dimensional (2D) graphene and one-dimensional (1D) CF, the CEF-NF/GE/PVDF film achieves a remarkable in-plane thermal conductivity of 25.702 W m^-1 K^-1, making it an exceptional heat conductor. In summary, our results demonstrate that CEF-NF/GE/PVDF film is an excellent EMI shielding material that is light weight, highly flexible, and mechanically robust with outstanding thermal conductivity, which positions it superbly for applications in next-generation commercial portable electronics.

The effect of chain structures on the crystallization behavior and membrane formation of poly(vinylidene fluoride) copolymers

The crystallization behaviors of two copolymers of PVDF were studied, and the effect of copolymerized chains on the crystallization behavior was investigated. The results indicated that both copolymers had a lowered crystallization temperature and crystallinity. The crystallization rate was improved by the copolymer with symmetrical units in PVDF chains, but hindered by asymmetrical units, compared with the neat PVDF. The symmetrical units in PVDF chains favored the β-crystals with fiber-like structures. According to the solubility parameter rule, methyl salicylate (MS) can be chosen as a diluent for PVDF copolymers. Both diluted systems had liquid-liquid (L-L) regions in the phase diagrams, which was due to the lowered crystallization temperature.