A nanoparticulate raloxifene delivery system based on biodegradable carboxylated polyurethane: Design, optimization, characterization, andin vitroevaluation

Sustained delivery of olanzapine from sunflower oil-based polyol-urethane nanoparticles synthesised through a cyclic carbonate ring-opening reaction

The forefront horizon of biomedical investigations in recent decades is parcelling-up and delivery of drugs to achieve controlled/targeted release. In this regard, developing green-based delivery systems for a spatiotemporal controlling therapeutic agent have drawn a lot of attention. A facile route based on cyclic carbonate ring-opening reaction has been utilised to synthesise a bio-based polyol-containing urethane bond [polyol-urethane (POU)] as a nanoparticulate drug delivery system of olanzapine in order to enhance its bioavailability. After characterisation, the nanoparticles were also estimated for in vitro release, toxicity, and pharmacokinetic studies. As olanzapine has shown poor bioavailability and permeability in the brain, the sustained release of olanzapine from the designed carriers could enhance pharmacokinetic effectiveness. POU in the aqueous solution formed micelles with a hydrophobic core and embedded olanzapine under the influence of its hydrophobic nature. Drug release from the nanoparticles (90 ± 0.43 nm in diameter) indicated a specific pattern with initial burst release, and then a sustained release behaviour (82 ± 3% after 168 h), by the Higuchi-based release mechanism. Pharmacokinetics assessments of POU-olanzapine nanoparticles were carried in male Wistar rats through intravenous administration. The obtained results paved a way to introduce the POU as an efficient platform to enhance the bioavailability of olanzapine in therapeutic methods.

Facile preparation of biodegradable dual stimuli-responsive micelles from waterborne polyurethane for efficient intracellular drug delivery

A novel waterborne polyurethane based on main chain degradation under acidic and reductive conditions of tumors was synthesized.

Advances in Waterborne Polyurethane-Based Biomaterials for Biomedical Applications

Polyurethane (PU) is one of the most popular synthetic elastomers and widely employed in biomedical fields owing to the excellent biocompatibility and hemocompatibility known today. In addition, PU is simply prepared and its mechanical properties such as durability, elasticity, elastomer-like character, fatigue resistance, compliance or tolerance in the body during the healing, can be mediated by modifying the chemical structure. Furthermore, modification of bulk and surface by incorporating biomolecules such as anticoagulant s or biorecognizable groups, or hydrophilic/hydrophobic balance is possible through altering chemical groups for PU structure. Such modifications have been designed to improve the acceptance of implant. For these reason, conventional solventborne (solvent-based) PUs have established the standard for high performance systems, and extensively used in medical devices such as dressings, tubing, antibacterial membrane , catheters to total artificial heart and blood contacting materials, etc. However, waterborne polyurethane (WPU) has been developed to improve the process of dissolving PU materials using toxic organic solvents, in which water is used as a dispersing solvent. The prepared WPU materials have many advantages, briefly (1) zero or very low levels of organic solvents, namely environmental-friendly (2) non-toxic, due to absence of isocyanate residues, and (3) good applicability caused by extensive structure/property diversity as well as an environment-friendly fabrication method resulting in increasing applicability. Therefore, WPUs are being in the spotlight as biomaterials used for biomedical applications . The purpose of this review is to introduce an environmental- friendly synthesis of WPU and consider the manufacturing process and application of WPU and/or WPU based nanocomposites as the viewpoint of biomaterials.

Design, characterization and in vitro evaluation of novel amphiphilic block sunflower oil-based polyol nanocarrier as a potential delivery system: Raloxifene-hydrochloride as a model

Presently, modern pharmaceuticals, are almost exclusively derived from the arduous refining of petroleum whose supply is inherently unsustainable. In order to address this issue bio-based materials are increasingly being used for chemical synthesis, particularly in drug delivery systems. Biodegradable and biocompatible hyper-branched polyol (an alcohol containing three or more hydroxyl groups) was synthesized via a facile method through the ring-opening and thiol-ene click reactions at room temperature. Due to the bio-based content of the polyol backbone, the synthesized polyol had both excellent biodegradability and low cytotoxicity. Raloxifene hydrochloride, an oral selective estrogen receptor modulator, was used as a hydrophobic drug model to test the potential of polyol as a drug delivery system carrier. Polyol showed an amphiphilic character and could be prepared as a nanoparticle for the sustained delivery of raloxifene hydrochloride, a drug with poor bioavailability in aqueous solution. Raloxifene hydrochloride was readily encapsulated in the lipophilic core of polyol whose branched hydroxyls were on the external part of the prepared nanoparticles. The diameter of the nanoparticles was 94±0.43nm, their drug entrapment efficiency was 93±0.5% and they showed a sustained release profile (17±1.5% after 4weeks). The 3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium (MTS) assay showed low toxicity towards human osteoblast MG-63 cells. Based on its good biodegradability and low cytotoxicity, polyol provides a bio-based source for the design new drug delivery systems.

Fully glutathione degradable waterborne polyurethane nanocarriers: Preparation, redox-sensitivity, and triggered intracellular drug release

Polyurethanes are important class of biomaterials that are extensively used in medical devices. In spite of their easy synthesis, polyurethanes that are fully degradable in response to the intracellular reducing environment are less explored for controlled drug delivery. Herein, a novel glutathione degradable waterborne polyurethane (WPU) nanocarrier for redox triggered intracellular delivery of a model lipophilic anticancer drug, doxorubicin (DOX) is reported. The WPU was prepared from polyaddition reaction of isophorone diisocyanate (IPDI) and a novel linear polyester polyol involving disulfide linkage, disulfide labeled chain extender, dimethylolpropionic acid (DMPA) using dibutyltin dilaurate (DBTDL) as a catalyst. The resulting polyurethane self-assembles into nanocarrier in water. The dynamic light scattering (DLS) measurements and scanning electron microscope (SEM) revealed fast swelling and disruption of nanocarriers under an intracellular reduction-mimicking environment. The in vitro release studies showed that DOX was released in a controlled and redox-dependent manner. MTT assays showed that DOX-loaded WPU had a high in vitro antitumor activity in both HDF noncancer cells and MCF- 7 cancer cells. In addition, it is found that the blank WPU nanocarriers are nontoxic to HDF and MCF-7 cells even at a high concentration of 2mg/mL. Hence, nanocarriers based on disulfide labeled WPU have appeared as a new class of biocompatible and redox-degradable nanovehicle for efficient intracellular drug delivery.

Raloxifene-/raloxifene-poly(ethylene glycol) conjugate-loaded microspheres: A novel strategy for drug delivery to bone forming cells

Raloxifene (Ral)- or Ral-poly(ethylene glycol) (PEG) conjugate-loaded microspheres were prepared with poly(ε-caprolactone) (PCL) alone or with the blend of PCL and poly(D,L-lactide-co-glycolide) (PLGA) to provide controlled and sustained Ral release systems. Benefits of these formulations were evaluated on bone regeneration. Ral-loaded PCL microspheres had the highest encapsulation efficiency (70.7±5.0%) among all groups owing to high hydrophobic natures of both Ral and PCL. Cumulative amount of Ral released from Ral-PEG (1:2) conjugate-loaded PCL:PLGA (1:1) microspheres (26.9±8.8%) after 60days was significantly higher relative to other microsphere groups. This finding can be ascribed to two factors: i) Ral-PEG conjugation, resulting in increased water-solubility of Ral and increased degradation rates of PCL and PLGA with enhanced water penetration into the polymer matrix, and ii) usage of PLGA besides PCL in the carrier composition to benefit from less hydrophobic and faster degradable nature of PLGA in comparison to PCL. In vitro cytotoxicity studies performed using adipose-derived mesenchymal stem cells (ASCs) demonstrated that all microspheres were non-toxic. Evaluation of intensities of Alizarin red S staining conducted after 7 and 14days of incubation of ASCs in the release media of the different microsphere groups was performed with Image J analysis software. At day 7, it was observed that the matrix deposited by the cells cultivated in the release medium of Ral-PEG (1:2) conjugate-loaded PCL:PLGA (1:1) microspheres had significantly higher mineral content (26.78±6.23%) than that of the matrix deposited by the cells cultivated in the release media of the other microsphere groups except Ral-loaded PCL:PLGA (1:1) microsphere group. At day 14, Ral release from Ral-PEG (1:2) conjugate-loaded PCL:PLGA (1:1) microsphere group resulted with significantly higher mineralization of the matrix (32.31±1.85%) deposited by ASCs in comparison to all other microsphere groups. Alizarin red S staining results eventuated in parallel with the release results. Thus, it can be suggested that Ral-PEG (1:2) conjugate-loaded PCL:PLGA (1:1) microsphere formulation has a potential as an effective controlled drug delivery system for bone regeneration.

Magnetic-Assisted, Self-Healable, Yarn-Based Supercapacitor

Yarn-based supercapacitors have received considerable attention recently, offering unprecedented opportunities for future wearable electronic devices (e.g., smart clothes). However, the reliability and lifespan of yarn-based supercapacitors can be seriously limited by accidental mechanical damage during practical applications. Therefore, a supercapacitor endowed with mechanically and electrically self-healing properties is a brilliant solution to the challenge. Compared with the conventional planar-like or large wire-like structure, the reconnection of the broken yarn electrode composed of multiple tiny fibers (diameter <20 μm) is much more difficult and challenging, which directly affects the restoration of electrical conductivity after damage. Herein, a self-healable yarn-based supercapacitor that ensures the reconnection of broken electrodes has been successfully developed by wrapping magnetic electrodes around a self-healing polymer shell. The strong force from magnetic attraction between the broken yarn electrodes benefits reconnection of fibers in the yarn electrodes during self-healing and thus offers an effective strategy for the restoration of electric conductivity, whereas the polymer shell recovers the configuration integrity and mechanical strength. With the design, the specific capacitance of our prototype can be restored up to 71.8% even after four breaking/healing cycles with great maintenance of the whole device's mechanical properties. This work may inspire the design and fabrication of other distinctive self-healable and wearable electronic devices.