Enhancing Crystallization and Toughness of Wood Flour/Polypropylene Composites via Matrix Crystalline Modification: A Comparative Study of Two β-Nucleating Agents

Incorporation of short wood fillers such as wood flour (WF) into polypropylene (PP) often results in a marked reduction of toughness, which is one of the main shortcomings for WF/PP composites. This research reports a facile approach to achieve toughening of WF/PP composites via introducing self-assembling β-nucleating agents into PP matrix. The effect of two kinds of nucleating agents, an aryl amide derivative (TMB5) and a rare earth complex (WBG II), at varying concentrations on the crystallization and mechanical properties of WF/PP composites was comparatively investigated. The results showed that both nucleating agents were highly effective in inducing β-crystal for WF/PP, with β-crystal content (k_β) value reaching 0.8 at 0.05 wt% nucleating agent concentration. The incorporation of TMB or WBG significantly decreased the spherulite size, increased the crystallization temperature and accelerated the crystallization process of WF/PP. As a result of PP crystalline modification, the toughness of composites was significantly improved. Through introducing 0.3 wt% TMB or WBG, the notched impact strength and strain at break of WF/PP increased by approximately 28% and 40%, respectively. Comparatively, although WF/PP-WBG had slightly higher K_β value than WF/PP-TMB at the same concentration, WF/PP/TMB exhibited more uniform crystalline morphology with smaller spherulites. Furthermore, the tensile strength and modulus of WF/PP-TMB were higher than WF/PP-WBG. This matrix crystalline modification strategy provides a promising route to prepare wood filler/thermoplastic composites with improved toughness and accelerated crystallization.

Toward Subtle Manipulation of Fine Dendritic β-Nucleating Agent in Polypropylene

Dendritic β-nucleating agent (β-NA) can readily manipulate the formation of dendritic β-crystal with a unique toughening effect on polypropylene (PP) to drastically enhance the ductility. However, by the current method, the geometric size is too large to fully perform the nucleating efficiency. In this study, by comparatively investigating the effect of molecular weight of PP and diffusion of β-NAs in a PP melt, we proposed a novel carrier strategy that selective enrichment of β-NAs in a PP carrier was followed by directed migration into polymer matrix. Accordingly, the growth of NAs was controlled by the release from the PP carrier, which decreased the available amount of β-NAs during the growth stage. In this case, the viscosity difference between PP carrier and matrix determined the interfacial movement of β-NAs. When the PP carrier and matrix had same molecular weight, the diffusion and release became favorable to facilitate the formation of the dense and fine dendritic aggregates. As a result, the relative content of β-crystals reached 92%, with a drastic increase of ∼82% in the optimal condition compared to the directed compounded PP/β-NAs sample. This study can open a new avenue to tailor the topologies of β-NAs and the ensuing β-crystals for high-performance PP products.