Superhydrophobic durable coating based on UV-photoreactive silica nanoparticles

Bio-inspired and metal-derived superwetting surfaces: Function, stability and applications

Due to their exceptional anti-icing, anti-corrosion, and anti-drag qualities, biomimetic metal-derived superwetting surfaces, which are widely employed in the aerospace, automotive, electronic, and biomedical industries, have raised significant concern. However, further applications in other domains have been hampered by the poor mechanical and chemical durability of superwetting metallic surfaces, which can result in metal fatigue and corrosion. The potential for anti-corrosion, anti-contamination, anti-icing, oil/water separation, and oil transportation on surfaces with superwettability has increased in recent years due to the advancement of research in biomimetic superwetting interface theory and practice. Recent developments in functionalized biomimetic metal-derived superwetting surfaces were summarized in this paper. Firstly, a detailed presentation of biomimetic metal-derived superwetting surfaces with unique capabilities was made. The problems with the long-term mechanical and chemical stability of biomimetic metal-derived superwetting surfaces were then examined, along with potential solutions. Finally, in an effort to generate fresh concepts for the study of biomimetic metal-derived superwetting surfaces, the applications of superwetting metallic surfaces in various domains were discussed in depth. The future direction of biomimetic metal-derived superwetting surfaces was also addressed.

Thermomechanical Mechanisms of Reducing Ice Adhesion on Superhydrophobic Surfaces

Superhydrophobic (SH) coatings have been shown to reduce freezing and ice nucleation rates, by means of low surface energy chemistry tailored with nano/micro roughness. Durability enhancement of SH surfaces is a crucial issue. Consequently, the present research on reducing ice adhesion is based on radiation-induced radical reaction for covalently bonding SiO2 nanoparticles to polymer coatings to obtain durable roughness. Results indicated that the proposed approach resulted in SH surfaces having high contact angles (>155°) and low sliding angles (<5°) with improved durability and transparency. In a subsequent stage, the synthesized SH coating was investigated for its icephobic characteristics using a variety of substrates. Results indicated that supercooled water drops bounced back when impinging on SH polycarbonate substrate and froze on SH copper substrate held at -10 to -30 °C and were easily peeled off when coated by ice formed during exposure to air/supercooled water drops at -20 °C. The ice shear adhesion investigation (at -20 °C) demonstrated reduction of shear adhesion to a variety of SH treated substrates having low thermal expansion coefficient (copper and aluminum) and high thermal expansion coefficient (polycarbonate and poly(methyl methacrylate)). It was concluded that the thermal mismatch between the adhering ice and the various substrates and its resultant interfacial thermal stresses affect the adhesion strength of the ice to the respective substrate.

Recent advances in the mechanical durability of superhydrophobic materials

Large majority of superhydrophobic surfaces have very limited mechanical wear robustness and long-term durability. This problem has restricted their utilization in commercial or industrial applications and resulted in extensive research efforts on improving resistance against various types of wear damage. In this review, advances and developments since 2011 in this field will be covered. As such, we summarize progress on fabrication, design and understanding of mechanically durable superhydrophobic surfaces. This includes an overview of recently published diagnostic techniques for probing and demonstrating tribo-mechanical durability against wear and abrasion as well as other effects such as solid/liquid spray or jet impact and underwater resistance. The review is organized in terms of various types of mechanical wear ranging from substrate adhesion, tangential surface abrasion, and dynamic impact to ultrasonic processing underwater. In each of these categories, we highlight the most successful approaches to produce robust surfaces that can maintain their non-wetting state after the wear or abrasive action. Finally, various recommendations for improvement of mechanical wear durability and its quantitative evaluation are discussed along with potential future directions towards more systematic testing methods which will also be acceptable for industry.

Durable and scalable icephobic surfaces: similarities and distinctions from superhydrophobic surfaces

Formation, adhesion, and accumulation of ice, snow, frost, glaze, rime, or their mixtures can cause severe problems for solar panels, wind turbines, aircrafts, heat pumps, power lines, telecommunication equipment, and submarines. These problems can decrease efficiency in power generation, increase energy consumption, result in mechanical and/or electrical failure, and generate safety hazards. To address these issues, the fundamentals of interfaces between liquids and surfaces at low temperatures have been extensively studied. This has lead to development of so called "icephobic" surfaces, which possess a number of overlapping, yet distinctive, characteristics from superhydrophobic surfaces. Less attention has been given to distinguishing differences between formation and adhesion of ice, snow, glaze, rime, and frost or to developing a clear definition for icephobic, or more correctly pagophobic, surfaces. In this review, we strive to clarify these differences and distinctions, while providing a comprehensive definition of icephobicity. We classify different canonical families of icephobic (pagophobic) surfaces providing a review of those with potential for scalable and robust development.

Mesoporous Silica Nanoparticles under Sintering Conditions: A Quantitative Study

Thin films made of mesoporous silica nanoparticles (MSNs) are finding new applications in catalysis, optics, as well as in biomedicine. The fabrication of MSNs thin films requires a precise control over the deposition and sintering of MSNs on flat substrates. In this study, MSNs of narrow size distribution (150 nm) are synthesized, and then assembled onto flat silicon substrates, by means of a dip-coating process. Using concentrated MSN colloidal solutions (19.5 mg mL(-1) SiO2), withdrawal speed of 0.01 mm s(-1), and well-controlled atmospheric conditions (ambient temperature, ∼ 70% of relative humidity), monolayers are assembled under well-structured compact patterns. The thin films are sintered up to 900 °C, and the evolution of the MSNs size distributions are compared to those of their pore volumes and densities. Particle size distributions of the sintered thin films were precisely fitted using a model specifically developed for asymmetric particle size distributions. With increasing temperature, there is first evidence of intraparticle reorganization/relaxation followed by intraparticle sintering followed by interparticle sintering. This study is the first to quantify the impact of sintering on MSNs assembled as thin films.