Antifouling and blood-compatible poly(ether sulfone) membranes modified by zwitterionic copolymers viaIn situcrosslinked copolymerization

Aminolysis-Based Zwitterionic Immobilization on Polyethersulfone Membranes for Enhanced Hemocompatibility: Experimental, Computational, and Ex Vivo Investigations

Dialysis membranes are not hemocompatible with human blood, as the patients are suffering from the blood-membrane interactions' side effects. Zwitterionic structures have shown improved hemocompatibility; however, their complicated synthesis hinders their commercialization. The goal of the study is to achieve fast functionalization for carboxybetaine and sulfobetaine zwitterionic immobilization on PES membranes while comparing the stability and the targeted hemocompatibility. The chemical modification approach is based on an aminolysis reaction. Characterization, computational simulations, and clinical analysis were conducted to study the modified membranes. Atomic force microscopy (AFM) patterns showed a lower mean roughness for carboxybetaine-modified (6.3 nm) and sulfobetaine-modified (7.7 nm) membranes compared to the neat membrane (52.61 nm). The pore size of the membranes was reduced from values above 50 nm for the neat PES to values between 2 and 50 nm for zwitterionized membranes, using Brunauer-Emmett-Teller (BET) analysis. More hydrophilic surfaces led to a growth equilibrium water content (EWC) of nearly 6% for carboxybetaine and 10% for sulfobetaine-modified membranes. Differential scanning calorimetry (DSC) measurements were 12% and 16% stable water for carboxybetaine- and sulfobetaine-modified membranes, respectively. Sulfobetaine membranes showed better compatibility with blood with respect to C5a, IL-1a, and IL-6 biomarkers. Aminolysis-based zwitterionization was found to be suitable for the improvement of hemodialysis membranes. The approach introduced in this paper could be used to modify the current dialysis membranes with minimal change in the production facilities.

Recent Advances on the Fabrication of Antifouling Phase-Inversion Membranes by Physical Blending Modification Method

Membrane technology is an essential tool for water treatment and biomedical applications. Despite their extensive use in these fields, polymeric-based membranes still face several challenges, including instability, low mechanical strength, and propensity to fouling. The latter point has attracted the attention of numerous teams worldwide developing antifouling materials for membranes and interfaces. A convenient method to prepare antifouling membranes is via physical blending (or simply blending), which is a one-step method that consists of mixing the main matrix polymer and the antifouling material prior to casting and film formation by a phase inversion process. This review focuses on the recent development (past 10 years) of antifouling membranes via this method and uses different phase-inversion processes including liquid-induced phase separation, vapor induced phase separation, and thermally induced phase separation. Antifouling materials used in these recent studies including polymers, metals, ceramics, and carbon-based and porous nanomaterials are also surveyed. Furthermore, the assessment of antifouling properties and performances are extensively summarized. Finally, we conclude this review with a list of technical and scientific challenges that still need to be overcome to improve the functional properties and widen the range of applications of antifouling membranes prepared by blending modification.

Ionic-Strength Responsive Zwitterionic Copolymer Hydrogels with Tunable Swelling and Adsorption Behaviors

In this work, we studied the swelling behavior and adsorption behavior of zwitterionic copolymer hydrogels, which were prepared via the free radical copolymerization of sulfobetaine methacrylate (SBMA) and other monomers including sodium p-styrenesulfonate (NaSS), acrylic acid, N-isopropylacrylamide, and 2-(dimethylamino) ethyl methacrylate. The PSBMA hydrogel showed increased swelling ratio with the increase of ionic strength at the same temperature, and the swelling process reflected endothermicity. Interestingly, the PSBMA-NaSS hydrogels collapsed when the ionic strength increased because the ions can weaken the repulsive interaction of the anionic groups of PNaSS. In addition, the PSBMA-NaSS showed high adsorption of methylene blue (760 mg/g). The zwitterionic hydrogels have potential to be used as an adsorbent in the field of wastewater treatment.

Design of Antibacterial Poly(ether sulfone) Membranes via Covalently Attaching Hydrogel Thin Layers Loaded with Ag Nanoparticles

To inhibit bacteria attachment and the subsequent formation of biofilms on poly(ether sulfone) (PES) membranes, poly(sulfobetaine methacrylate)/poly(sodium acrylate) antibacterial hydrogel thin layers were covalently attached onto the membranes, followed by loading with Ag nanoparticles. In our strategy, double bonds were firstly introduced onto the PES membrane surfaces to provide anchoring sites, and then the hydrogel layers were synthesized on the membrane surfaces via UV light-initiated crosslinking copolymerization. Then, Ag ions were adsorbed into the hydrogel layers and reduced to Ag nanoparticles by sodium borohydride. The amounts of the adsorbed Ag ions were controlled by the mole ratios of carboxylate groups in the hydrogel layers. After attaching the hydrogel layers, a typical 3D porous structure was observed by scanning electron microscopy, and the surface chemical composition variations were characterized by attenuated total reflection-Fourier transform infrared spectroscopy. The live/dead staining, inhibition zone, and the optical degree of co-culture solution demonstrated that the designed surfaces could not only effectively resist bacteria attachment but also kill the surrounding bacteria Escherichia coli and Staphylococcus aureus. It was noteworthy that the strong antibacterial ability could be maintained for more than 5 weeks. Additionally, the excellent hemocompatibility of the modified membranes was confirmed by undetectable plasma protein adsorption, suppressed platelet adhesion, prolonged clotting time, low hemolysis ratio, and suppressed blood-related complement activation. Cell culture tests indicated that the membranes showed no cytotoxicity, but strong anti-cell adhesion properties. The proposed method to fabricate antibacterial hydrogel thin layers has great potential to be widely used to inhibit the formation of biofilms on various biomedical devices.

Durable antifouling polyvinylidene fluoride membrane via surface zwitterionicalization mediated by an amphiphilic copolymer

The antifouling properties of PVDF membrane were remarkably enhanced by facile incorporation of an amphiphilic triblock copolymer PDMAEMA-b-PDMS-b-PDMAEMA and subsequent surface zwitterionicalization.