Vinyl acetate content and electron beam irradiation directed alteration of structure, morphology, and associated properties of EVA/EPDM blends

Enhancing Microalgae Content in Biocomposites through a Mechanical Grinding Method

Microalgae-based biocomposites are gaining traction as ecofriendly and cost-effective alternatives to conventional petroleum-based plastics. However, achieving a homogeneous dispersion of microalgae within a biocomposite matrix remains a challenge. In this study, we investigated the effect of the size of dried microalgae (Chlorella sp.) on the quality of biocomposites. Ball milling, a mechanical grinding process, was used to control the size of the pretreated dried microalgae. Our results demonstrate that the microalgae size strongly depends on the total weight of the stainless-steel balls, rather than the number of balls used in the milling process. Poly(ethylene-vinyl acetate) (EVA), with functional groups resembling those of Chlorella sp., was incorporated into the ball-milled microalgae to produce homogeneous biocomposites. Smaller Chlorella sp. particles improved the ratio of microalgae and the mechanical properties of the biocomposites. Dried Chlorella sp. particles up to 161.43 μm, which were 72.84% smaller than the untreated microalgae, were obtained after 6 h of ball milling using 3/8-inch balls. This enabled the production of biocomposites with 60 wt.% microalgae and 61.02% of the tensile strength of pure EVA, comparable to traditional polymers. Our findings suggest that controlling the microalgae size through ball milling can improve the quality of microalgae-based biocomposites.

Radiation Processing of Styrene-isoprene-styrene/Poly(ε-caprolactone) Blends

The irradiation consequences on styrene-isoprene-styrene (SIS)/poly(ε-caprolactone) (PCL) blends are discussed starting from the oxidation initiation. Three characterization methods: chemiluminescence, differential scanning calorimetry and FTIR spectroscopy are applied. The differences that exist between the two components are revealed, when the oxidation rates of the inspected formulas depend on the blending proportion and the degradation conditions. The relevant activation energies characterizing the oxidation strength as well as the kinetic parameters of degradation during the accelerated damaging of blended polymers are related to the inhibition protection of PCL on the faster oxidation of SIS. The interaction between mixed components is revealed by the structural modifications simultaneously accompanied by the competition of formation and decay of radicals.

Gamma Radiation Processed Polymeric Materials for High Performance Applications: A Review

The polymeric properties are tailored and enhanced by high energy radiation processing, which is an effective technique to tune the physical, chemical, thermal, surface, and structural properties of the various thermoplastic and elastomeric polymeric components. The gamma and electron beam radiation are the most frequent radiation techniques used for crosslinking, compatibilizing, and grafting of various polymer blends and composites systems. The gamma radiation-induced grafting and crosslinking are the effective, rapid, clean, user-friendly, and well-controlled techniques for the polymeric materials for their properties improvement for high performance applications such as nuclear, automobile, electrical insulation, ink curing, surface modification, food packaging, medical, sterilization, and health-care in a different environment. Similarly, electron beam radiations crosslinking has been a well-known technique for properties development and has economic benefits over chemical crosslinking techniques. This review focuses on the development of polymeric multi component systems (functionalized polymer, blends, and nanohybrids), where partially nanoscale clay incorporation can achieve the desired properties, and partially by controlled high energy radiations crosslinking of blends and nanocomposites. In this review, various investigations have been studied on the development and modifications of polymeric systems, and controlled dose gamma radiation processed the polymer blends and clay-induced composites. Radiation induced grafting of the various monomers on the polymer backbone has been focused. Similarly, comparative studies of gamma and electron beam radiation and their effect on property devlopment have been focused. The high energy radiation modified polymers have been used in several high performance sectors, including automotive, wire and cable insulation, heat shrinkable tube, sterilization, biomedical, nuclear and space applications.