Influence of diaminobenzoyl-functionalized multiwalled carbon nanotubes on the nonisothermal curing kinetics, dynamic mechanical properties, and thermal conductivity of epoxy-anhydride composites

Property Prediction of Ag-Filled Isotropic Conductive Adhesive through the Analysis of Its Curing and Decomposition Kinetics

In this study, various thermal analyses were carried out on a self-developed and commerce-oriented Ag-filled isotropic conductive adhesive (ICA) and its unfilled matrix resin through which glass transition temperature (Tg) and thermal endurance could be quantitatively predicted. An autocatalyzed kinetic model was used to describe the curing reaction, which was proven to be in good consistency with the experimental data. The activation energies for the curing reaction of the ICA and the matrix resin were determined to be 68.1 kJ/mol and 72.9 kJ/mol, respectively, which means that the reaction of the ICA was easier to occur than its unfilled matrix resin. As a result, the time–temperature profile could be calculated for any Tg requested based on the kinetic model of curing and the DiBenedetto equation. Further, the thermal decomposition stability of the ICA and its unfilled matrix resin were also studied. The activation energies for the thermal decomposition of the ICA and the matrix resin were calculated to be 134.1 kJ/mol and 152.7 kJ/mol, respectively, using the Ozawa–Flynn–Wall method, which means that the decomposition of ICA was easier to occur. The service life of the resin system at a specific temperature could therefore be calculated with their activation energy. The addition of micro-scale Ag flakes did not change the curing and decomposition mechanisms by much.

Synthesis, Thermal Properties and Curing Kinetics of Hyperbranched BPA/PEG Epoxy Resin

The hyperbranched epoxy resins (HBE) composed of bisphenol A (BPA) and polyethylene glycol (PEG) as reactants and pentaerythritol as branching point were successfully synthesized via A₂ + B₄ polycondensation reaction at various BPA/PEG ratios. The ¹³C NMR spectra revealed that the synthesized HBE mainly had a dendritic structure as confirmed by the high degree of branching (DB). The addition of PEG in the resin enhanced degree of branching (DB) (from 0.82 to 0.90), epoxy equivalent weight (EEW) (from 697 g eq⁻¹ to 468 g eq⁻¹) as well as curing reaction. Adding 5–10 wt.% PEG in the resin decreased the onset and peak curing temperatures and glass transition temperature; however, adding 15 wt.% PEG in the resin have increased these thermal properties due to the lowest EEW. The curing kinetics were evaluated by fitting the experimental data of the curing behavior of all resins with the Šesták–Berggren equation. The activation energy increased with the increase of PEG in the resins due to HBE’s steric hindrance, whereas the activation energy of HBE15P decreased due to a large amount of equivalent active epoxy group per mass sample. The curing behavior and thermal properties of obtained hyperbranched BPA/PEG epoxy resin would be suitable for using in electronics application.