Molecular weight and the Mark-Houwink relation for ultra-high molecular weight charged polyacrylamide determined using automatic batch mode multi-angle light scattering

In Situ Copolymerization Studies of Lignin, Acrylamide, and Diallyldimethylammonium Chloride: Mechanism, Kinetics, and Rheology

In this work, free-radical polymerization of kraft lignin, acrylamide (AM), and diallyldimethylammonium chloride (DADMAC) was studied in detail. In situ nuclear magnetic resonance (NMR), rheological analysis, and particle size techniques were conducted to understand the physicochemical characteristics of this copolymerization system. The copolymerization of lignin-AM and lignin-DADMAC had activation energies of 65.7 and 69.3 kJ/mol, respectively, and followed the first-order kinetic model, which was monitored by in situ H1 NMR results. The highest conversions of AM and DADMAC were 96 and 68%, respectively, in the copolymerization of lignin, AM, and DADMAC at the molar ratio of 5.5:2.4:1, pH 2 and 85 °C. The results illustrated that the participation of AM in the reaction was essential for polymerizing DADMAC to lignin due to less steric hindrance of AM than DADMAC facilitating its bridging performance. The monomer conversion ratio and dynamic rheology of the reaction system indicated that lignin acted as an inhibitor in the copolymerization reaction. The particle size analysis of the reaction mixtures reflected the alteration in the size of particles from coarse particles (>300 μm) to fine particles (<10 and 10-50 μm) and suspension to colloidal systems when the reaction progressed. The oscillation study of the reaction media confirmed the gradual increase in the viscosity of the reaction media, illustrating the crosslinking of lignin, AM, and DADMAC.

1H DOSY analysis of high molecular weight acrylamide-based copolymer electrolytes using an inverse-geometry diffusion probe

Copolymers of [2-(acryloyloxy)ethyl]trimethylammonium chloride (AETAC) and acrylamide (AAm) (AETAC-co-AAm) are polyelectrolytes used as flocculants in wastewater purification. Diffusion-ordered two-dimensional NMR spectroscopy (DOSY) experiments for AETAC-co-AAm samples with Mw ranging from 1.9 to 3.9 million and a polyacrylamide sample with Mw of 1.3 million were carried out in pure D2O and in D2O containing 0.1 or 1 M NaCl using an inverse-geometry diffusion probe system. Projections of the DOSY contour plots onto the diffusion coefficient (D) dimension gave distributions of D for the AETAC and AAm units in the samples. The D values at the maximum point of the distribution (Dp) agreed fairly well with those determined by dynamic light scattering.

Characterization of ultrahigh molecular weight poly(ethylene oxide) by size-exclusion chromatography with multiangle light scattering detection

This study investigated the experimental conditions needed to obtain molecular weight distribution (MWD) of ultrahigh MW poly(ethylene oxide) (PEO) using size exclusion chromatography (SEC) hyphenated with a multiangle light scattering photometer (MALS) and a differential refractive index detector (RI). Ultrahigh MW components yielded non-linear angular dependency in scattered light intensities. The first-order linear fitting using Zimm formalism resulted in significant differences in MW depending on if the signals from detector 4 to 16 were used in the fitting or only five low-angles from 4 to 8 were used. In contrast, no significant differences in MW were obtained for lower MW PEO samples (equal or less than 1000 KDa) between the two fitting approaches. It was thus proposed to use only the five low-angles to derive MW for a sample with broad polydispersity including both ultrahigh and low MW components. The SEC separation was done using one column designed for ultrahigh MW polymer separation connected with another mixed-bed column. The ultrahigh MW column allowed separation and characterization of polymeric components in the MW range between 10 and 50 million Dalton (MDa) and the size range between 300 and 600 nm in radius of gyration (Rg). Online calibration curves were obtained from the linear fittings of MW as a function of elution volume. MW polydispersity was derived from the online calibration curve showing that the ultrahigh MW PEO had higher polydispersity than the lower MW samples. The double logarithmic plot of radius of gyration versus MW indicated that both ultrahigh MW and low MW PEO would adopt expanded coil conformations in the aqueous solution.