A Critical Review on the Use of Molecular Imprinting for Trace Heavy Metal and Micropollutant Detection

Molecular recognition has been described as the “ultimate” form of sensing and plays a fundamental role in biological processes. There is a move towards biomimetic recognition elements to overcome inherent problems of natural receptors such as limited stability, high-cost, and variation in response. In recent years, several alternatives have emerged which have found their first commercial applications. In this review, we focus on molecularly imprinted polymers (MIPs) since they present an attractive alternative due to recent breakthroughs in polymer science and nanotechnology. For example, innovative solid-phase synthesis methods can produce MIPs with sometimes greater affinities than natural receptors. Although industry and environmental agencies require sensors for continuous monitoring, the regulatory barrier for employing MIP-based sensors is still low for environmental applications. Despite this, there are currently no sensors in this area, which is likely due to low profitability and the need for new legislation to promote the development of MIP-based sensors for pollutant and heavy metal monitoring. The increased demand for point-of-use devices and home testing kits is driving an exponential growth in biosensor production, leading to an expected market value of over GPB 25 billion by 2023. A key requirement of point-of-use devices is portability, since the test must be conducted at “the time and place” to pinpoint sources of contamination in food and/or water samples. Therefore, this review will focus on MIP-based sensors for monitoring pollutants and heavy metals by critically evaluating relevant literature sources from 1993 to 2022.

Development and Application of Molecularly Imprinted Polymers for the Selective Extraction of Chlordecone from Bovine Serum

The widespread use of chlordecone (CLD), an organochlorine pesticide, until the 1990s to protect banana crops in the French West Indies led to significant pollution of water and soil and, subsequently, of bovine intended for human consumption. Carcasses are submitted to official controls based on perirenal fat CLD determination. In order to allow for pre-slaughter controls, a selective analytical method based on a molecularly imprinted polymer (MIP) associated to the LC/MS-MS method was developed to determine the level of CLD in bovine serum that can be collected before slaughter. Different synthesis conditions were therefore assayed by varying the nature of the monomer and of the porogen, and the most promising MIP in terms of selective retention for CLD (extraction recovery close to 100%) was completely characterized by solid-phase extraction (repeatability of the extraction procedure, of the synthesis, and of the cartridge filling) in pure medium. The capacity of the MIP was determined at 0.13 µmol g−1 of MIP. After application of a spiked bovine serum sample on the MIP, the selective retention was maintained (87 and 21%, respectively, on the MIP and on the corresponding non-imprinted polymer). Moreover, extraction on the MIP led to a cleaner extract compared to those issued from a conventional C18 sorbent.

Colorimetric Sensing of Amoxicillin Facilitated by Molecularly Imprinted Polymers

The scope of the presented research orientates itself towards the development of a Molecularly Imprinted Polymer (MIP)-based dye displacement assay for the colorimetric detection of the antibiotic amoxicillin in aqueous medium. With this in mind, the initial development of an MIP capable of such a task sets focus on monolithic bulk polymerization to assess monomer/crosslinker combinations that have potential towards the binding of amoxicillin. The best performing composition (based on specificity and binding capacity) is utilized in the synthesis of MIP particles by emulsion polymerization, yielding particles that prove to be more homogenous in size and morphology compared to that of the crushed monolithic MIP, which is an essential trait when it comes to the accuracy of the resulting assay. The specificity and selectivity of the emulsion MIP proceeds to be highlighted, demonstrating a higher affinity towards amoxicillin compared to other compounds of the aminopenicillin class (ampicillin and cloxacillin). Conversion of the polymeric receptor is then undertaken, identifying a suitable dye for the displacement assay by means of binding experiments with malachite green, crystal violet, and mordant orange. Once identified, the optimal dye is then loaded onto the synthetic receptor, and the displaceability of the dye deduced by means of a dose response experiment. Alongside the sensitivity, the selectivity of the assay is scrutinized against cloxacillin and ampicillin. Yielding a dye displacement assay that can be used (semi-)quantitatively in a rapid manner.

MIPs for commercial application in low-cost sensors and assays - An overview of the current status quo

Molecularly imprinted polymers (MIPs) have emerged over the past few decades as interesting synthetic alternatives due to their long-term chemical and physical stability and low-cost synthesis procedure. They have been integrated into many sensing platforms and assay formats for the detection of various targets, ranging from small molecules to macromolecular entities such as pathogens and whole cells. Despite the advantages MIPs have over natural receptors in terms of commercialization, the striking success stories of biosensor applications such as the glucose meter or the self-test for pregnancy have not been matched by MIP-based sensor or detection kits yet. In this review, we zoom in on the commercial potential of MIP technology and aim to summarize the latest developments in their commercialization and integration into sensors and assays with high commercial potential. We will also analyze which bottlenecks are inflicting with commercialization and how recent advances in commercial MIP synthesis could overcome these obstacles in order for MIPs to truly achieve their commercial potential in the near future.

A Molecularly Imprinted Polymer-based Dye Displacement Assay for the Rapid Visual Detection of Amphetamine in Urine

The rapid sensing of drug compounds has traditionally relied on antibodies, enzymes and electrochemical reactions. These technologies can frequently produce false positives/negatives and require specific conditions to operate. Akin to antibodies, molecularly imprinted polymers (MIPs) are a more robust synthetic alternative with the ability to bind a target molecule with an affinity comparable to that of its natural counterparts. With this in mind, the research presented in this article introduces a facile MIP-based dye displacement assay for the detection of (±) amphetamine in urine. The selective nature of MIPs coupled with a displaceable dye enables the resulting low-cost assay to rapidly produce a clear visual confirmation of a target's presence, offering huge commercial potential. The following manuscript characterizes the proposed assay, drawing attention to various facets of the sensor design and optimization. To this end, synthesis of a MIP tailored towards amphetamine is described, scrutinizing the composition and selectivity (ibuprofen, naproxen, 2-methoxphenidine, quetiapine) of the reported synthetic receptor. Dye selection for the development of the displacement assay follows, proceeded by optimization of the displacement process by investigating the time taken and the amount of MIP powder required for optimum displacement. An optimized dose-response curve is then presented, introducing (±) amphetamine hydrochloride (0.01-1 mg mL^-1) to the engineered sensor and determining the limit of detection (LoD). The research culminates in the assay being used for the analysis of spiked urine samples (amphetamine, ibuprofen, naproxen, 2-methoxphenidine, quetiapine, bupropion, pheniramine, bromopheniramine) and evaluating its potential as a low-cost, rapid and selective method of analysis.

Preparation of Chitosan Poly(methacrylate) Composites for Adsorption of Bromocresol Green

In the present study, chitosan poly(methacrylate) composites were prepared and applied for adsorption of bromocresol green from aqueous solutions. The synthesized composites were characterized with scanning electron microscopy, Fourier transform infrared spectroscopy, and thermogravimetric analysis. The bromocresol green removal by the developed adsorbent was investigated, and the effects of experimental parameters, including sample pH and adsorption time, were also examined. Furthermore, the adsorption characteristics of the synthesized adsorbent, including kinetics, adsorption isotherms, and thermodynamics, were comprehensively studied. The adsorption isotherm was well described by the Freundlich model, and the maximum adsorption capacity was 39.84 μg mg^-1 by shaking for 40 min at pH 2.0. Bromocresol green adsorption kinetics followed a pseudo-second-order kinetic model, indicating that adsorption was the rate-limiting step. Thermodynamic parameters and the negative values of Gibbs free energy change (ΔG°) showed that adsorption was a spontaneous process. The positive values of entropy change (ΔS°) implied that the adsorption of bromocresol green on chitosan poly(methacrylate) composites was an increasing random process. In addition, enthalpy change (ΔH°) values were positive, suggesting that the adsorption of bromocresol green was endothermic. The adsorption percentage of bromocresol green with chitosan poly(methacrylate) composites remained above 97% after three times of recycling test.