The preparation of microcrystalline cellulose-nanoSiO2hybrid materials and their application in tire tread compounds

EMERGING ADVANCES IN RUBBER TECHNOLOGY BY THE SUITABLE APPLICATION OF SOL-GEL SCIENCE AND TECHNOLOGY

In recent years, the application of sol-gel science to industrial polymer research has offered advancements in rubber technology. The use of sol-gel–synthesized materials for the development of highly reinforced rubber composites is the most commonly adopted and popular method exercised by rubber scientists. This article comprehensively reviews the recent progress regarding preparation and properties of sol-gel–synthesized nanoparticles-based rubber composites. The pragmatic consequences of sol-gel–synthesized nanoparticles in rubber compounds are systematically described through rheological, mechanical, and thermal properties. Emphatic focus is given to understanding the reinforcement mechanism of rubber composites by the use of sol-gel–derived alkoxide silica as filler. The properties of rubber nanocomposites are usually dependent on the dispersion of sol-gel–synthesized nanoparticles into the rubber matrix. The results reviewed from prolific studies suggested that sol-gel science has tremendous potential to develop high performance rubber nanocomposites for future industrial application.

Wet Mixing with Organic Solvent for Synthesized cis-1,4-Polyisoprene-Based Rubber Composites

In this work, well-dispersed fumed SiO₂/cis-1,4-polyisoprene rubber (IR) masterbatch was first obtained through an effective wet mixing method, and the properties of the corresponding vulcanizate were studied. Before curing with activator and sulfur, IR solution was blended and co-coagulated with SiO₂ suspension modified by bis(3-trimethoxysilypropyl) tetrasulfide in n-hexane. The modification of TESPT imparted evenly distributed SiO₂ particles in IR and improved interfacial binding among SiO₂ and IR. Hence, the prepared compound presented better processability and the corresponding vulcanizate presented higher physical performance, including higher tensile strength, lower heat buildup, and better fatigue resistance than that prepared in the dry mixing method. Additionally, higher wet skid resistance and lower rolling resistance could be observed in fabricated SiO₂/IR vulcanizate. The employed wet mixing method is economical and efficient, which is promising in preparing rubber composites with comprehensive performance.

Green tire technology: Effect of rice husk derived nanocellulose (RHNC) in replacing carbon black (CB) in natural rubber (NR) compounding

The effect of replacing carbon black (CB) by rice husk derived type-I nanocellulose (RHNC) in natural rubber vulcanization is presented in this study. The synthesized RHNC was characterized using various analytical techniques like FTIR, XRD, SEM, TEM, DLS, TGA etc. The cure characteristics, mechanical, technological, thermal, barrier and dynamic mechanical properties of the composites were analysed. The mechanical properties of the NR composites containing 30 wt% of CB are comparable with the composite containing 25 wt% of CB and 5 wt% of RHNC. The DMA studies show that the loss tangent (tan δ) at 60 °C is lower for the composite containing 5 wt% of RHNC and 25 wt% CB compared to the composite containing 30 wt% CB. This shows that RHNC can impart low rolling resistance, which is a crucial parameter for green tire applications.