Investigation on the interaction of collagen molecules in solution with different acetic acid concentrations

Probing the aggregation behavior of collagen molecules regulated by dibenzaldehyde-terminated-PEG with varying molecular weights in solution

Rigid and fragile nature of collagen-based materials cross-linked with biocompatible aldehyde-functionalized polysaccharides remains a challenge. Drawing inspiration from the pangolins' protective barrier, we introduce a novel cross-linker with a flexible chain to impart a "rigid-flexible coupled structure" to the collagen-based matrix. Successful integration of dibenzaldehyde-terminated-PEG (DF-PEG) into collagen molecules was confirmed by XRD and FTIR analyses. CD measurements demonstrated that the intact triple-helical structure was preserved in all samples. Distinct effects of DF-PEG with varying molecular weights on the aggregation behavior of collagen molecules were evaluated using multiple quantitative analysis techniques. Specifically, when the molecular weight of DF-PEG was below 20,000, multipoint hydrogen bonds and Schiff-base linkages were produced as the molecular weight of DF-PEG increased, which synergistically enhanced the aggregation behavior of collagen molecules. While the aggregation behavior of collagen molecules was slightly diminished upon the molecular weight of DF-PEG reached 20,000. This reduction can be attributed to the limited accessibility of the molecular reactive sites in the extended DF-PEG chains. Finally, a computational test of the binding interactions between collagen molecules and DF-PEG was conducted to validate the experimental results. Our biomimetic design strategy offers a new approach for the preparation of collagen-based materials with exceptional physicochemical properties.

Quantitation of native and forced degraded collagens by capillary zone electrophoresis: Method development and validation

A new capillary zone electrophoresis method for collagen quantitation was developed and validated according to the International Council for Harmonization guideline Q2 (R1). The Sircol collagen assay and ultraviolet spectrometry were employed as reference methods. Capillary zone electrophoresis enables specific, simple, and fast determination within 9 min. It is less user-dependent and more automated than the Sircol collagen assay. With a limit of detection of 18.0 μg/mL, the new method is less sensitive than the Sircol collagen assay, which has a limit of detection of 6.5 μg/mL. Nonetheless, capillary zone electrophoresis covers a wider linearity range (50-400 μg/mL) compared to the Sircol collagen assay (5-80 μg/mL), with similar precision. Additional advantages of capillary zone electrophoresis are the ability to gain information on collagen integrity and to simultaneously determine native and denatured collagens. This approach represents a modern and legitimate alternative to the Sircol collagen assay. The developed method has been successfully applied to the study of three collagen products and samples from forced degradation.

Fracture behaviour and toughening mechanisms of dry and wet collagen

The growing interest to the use of collagen films for biomedical applications motivates the analysis of their fracture behaviour in different environments. Studies revealed the decreased mechanical strength and stiffness as well as increased plasticity in water compared to collagen specimens tested in air. However, the fracture behaviour of pure collagen films in both air and water has not been reported so far. In this paper, the entire process of mode-I loading of single-edge notched tension (SENT) specimens was recorded and analysed. In case of in-air (dry) specimens, cracks propagated rapidly in a brittle fashion while large plastic deformations were observed in aqua prior to failure due to crack opening and a blunting mechanism in wet specimens. The fracture-toughness parameters for pure collagen in air and in aqua were estimated using linear-elastic (K_I and G_I) and elasto-plastic (J_I) fracture-mechanics approaches, respectively, following the force-displacement response and deformational behaviour. G_IC and J_I were 1365 ± 112 J/m² and 2500 ± 440 J/m², respectively. Scanning electron microscopy was used to observe the structural changes linked to collagen fibrils in the crack-tip area and the fracture surface. For in-air specimens, the former mostly exhibited extrinsic toughening (usually at micro scale) acting behind the crack-tip, while in-aqua intrinsic toughening acting ahead of a crack tip was found. Fractography of in-air specimens showed no occurrence of voids while multiple micro-voids were found for in-aqua specimens. STATEMENT OF SIGNIFICANCE: The fracture toughness and crack propagation of both mineralised (bone, dentine) and non-mineralised (skin) tissues has been extensively investigated over the past decades. Though these tissues are rich in collagen, the fracture properties of pure collagen have not been quantified yet at macroscale. Considering the applications of collagen films in tissue regeneration, it is essential to perform investigations of their fracture behaviour in both dry and wet conditions. Determining the effect of environment on the fracture behaviour of collagen and understanding its toughening mechanism are essential for prevention of failures during application. Moreover, this would give an insight for fabrication of tougher collagen-based biomaterials for biomedical uses.