Melt-processable and self-healing poly(vinyl alcohol) elastomer containing diol groups in the side chain

Preparation and Characterization of Polyvinylalcohol/Polysulfone Composite Membranes for Enhanced CO2/N2 Separation

The unique properties of polyvinyl alcohol (PVA) and polysulfone (PSf), such as good membrane-forming ability and adjustable structure, provide a great opportunity for CO₂-separation membrane development. This work focuses on the fabrication of PVA/PSf composite membranes for CO₂/N₂ separations. The membranes prepared by coating a 7.5 wt% PVA on top of PSf substrate showed a relatively thin selective layer of 1.7 µm with an enhanced CO₂/N₂ selectivity of 78, which is a ca. 200% increase compared to the pure PSf membranes. The CO₂/N₂ selectivity decreases at a rapid rate with the increase of feed pressure from 1.8 to 5 bar, while the CO₂ permeance shows a slight reduction, which is caused by the weakening of coupling transportation between water and CO₂ molecules, as well as membrane compaction at higher pressures. Increasing operating temperature from 22 °C to 50 °C leads to a slight decrease in CO₂ permeance, but a significant reduction in the CO₂/N₂ selectivity from 78 to 27.1. Moreover, the mass transfer coefficient of gas molecules is expected to increase at a higher velocity, which leads to the increase of CO₂ permeance at higher feed flow rates. It was concluded that the CO₂ separation performance of the prepared membranes was significantly dependent on the membrane operating parameters, and process design and optimization are crucial to bringing CO₂-separation membranes for industrial applications in post-combustion carbon capture.