Bio‐based engineered nanocomposite foam with enhanced mechanical and thermal barrier properties

Biomaterials for bone tissue engineering: achievements to date and future directions

Advancement in medicine and technology has resulted into prevention of countless deaths and increased life span. However, it is important to note that, the modern lifestyle has altered the food habits, witnessed increased life-style stresses and road accidents leading to several health complications and one of the primary victims is the bone health. More often than ever, healthcare professionals encounter cases of massive bone fracture, bone loss and generation of critical sized bone defects. Surgical interventions, through the use of bone grafting techniques are necessary in such cases. Natural bone grafts (allografts, autografts and xenografts) however, have major drawbacks in terms of delayed rehabilitation, lack of appropriate donors, infection and morbidity that shifted the focus of several investigators to the direction of synthetic bone grafts. By employing biomaterials that are based on bone tissue engineering (BTE), synthetic bone grafts provide a more biologically acceptable approach to establishing the phases of bone healing. In BTE, various materials are utilized to support and enhance bone regeneration. Biodegradable polymers like poly-(lactic acid), poly-(glycolic acid), and poly-(ϵ-caprolactone) are commonly used for their customizable mechanical properties and ability to degrade over time, allowing for natural bone growth. PEG is employed in hydrogels to promote cell adhesion and growth. Ceramics, such as hydroxyapatite and beta-tricalcium phosphate (β-TCP) mimic natural bone mineral and support bone cell attachment, withβ-TCP gradually resorbing as new bone forms. Composite materials, including polymer-ceramic and polymer-glasses, combine the benefits of both polymers and ceramics/glasses to offer enhanced mechanical and biological properties. Natural biomaterials like collagen, gelatin, and chitosan provide a natural matrix for cell attachment and tissue formation, with chitosan also offering antimicrobial properties. Hybrid materials such as decellularized bone matrix retain natural bone structure and biological factors, while functionalized scaffolds incorporate growth factors or bioactive molecules to further stimulate bone healing and integration. The current review article provides the critical insights on several biomaterials that could yield to revolutionary improvements in orthopedic medical fields. The introduction section of this article focuses on the statistical information on the requirements of various bone scaffolds globally and its impact on economy. In the later section, anatomy of the human bone, defects and diseases pertaining to human bone, and limitations of natural bone scaffolds and synthetic bone scaffolds were detailed. Biopolymers, bioceramics, and biometals-based biomaterials were discussed in further depth in the sections that followed. The article then concludes with a summary addressing the current trends and the future prospects of potential bone transplants.

Bioactive fluorcanasite reinforced magnesium alloy-based porous bio-nanocomposite scaffolds with tunable mechanical properties

Magnesium (Mg) alloy-based porous bio-nanocomposite bone scaffolds were developed by powder metallurgy route. Selective alloying elements such as calcium (Ca), zinc (Zn) and strontium (Sr) were incorporated to tune the mechanical integrity while, bioactive fluorcanasite nano-particulates were introduced within the alloy system to enhance the bone tissue regeneration. Green compacts containing carbamide were fabricated and sintered using two-stage heat treatment process to achieve the targeted porosities. The microstructure of these fabricated magnesium alloy-based bio-nanocomposites was examined by Field emission scanning electron microscope (FE-SEM) and x-ray micro computed tomography (x-ray μCT), which revealed gradient porosities and distribution of alloying elements. X-ray diffraction (XRD) studies confirmed the presence of major crystalline phases in the fabricated samples and the evolution of the various combinations of intermetallic phases of Ca, Mg, Zn and Sr which were anticipated to enhance the mechanical properties. Further, XRD studies revealed the presence of apatite phase for the immersed samples, a conducive environment for bone regeneration. The fabricated samples were evaluated for their mechanical performance against uniaxial compression load. The tunability of compressive strengths and modulus values could be established with variation in porosities of fabricated samples. The retained compressive strength and Young's modulus of the samples following immersion in phosphate buffered saline (PBS) solution was found to be in line with that of natural human cancellous bone, thereby establishing the potential of the fabricated magnesium-alloy-based nanocomposite as a promising scaffold candidate for bone tissue engineering.

Recent advances on injectable nanocomposite hydrogels towards bone tissue rehabilitation

There has been significant interest in the recent past to develop injectable hydrogel scaffolds that follow minimally invasive implantation procedures towards efficient healing and regeneration of defective bone tissues. Such scaffolds offer several advantages, as they can be injected into the irregularly shaped defect and can act as a low‐density aqueous reservoir, incorporating necessary components for bone tissue repair and augmentation. Considering that bone is a biocomposite of natural biopolymer and bioapatite nanofiller, there has been a growing trend to develop nanocomposite scaffolds by combining biopolymers and inorganic nanofillers to biomimic the hierarchical nanostructure and composition of natural bone. Furthermore, the nanocomposite scaffolds can be tailored to have patient‐specific bone properties, which can lead to better biological responses. The present article begins with the introduction, followed by an overview of polymer matrices, property requirements, and crosslinking techniques employed for injectable hydrogels. Various strategies to develop injectable composites, with emphasis on nanocomposite hydrogels incorporating bioinert and bioactive nanofillers have been discussed. The fundamental challenges related to the development of injectable hydrogel nanocomposite scaffolds and the research efforts directed towards solving these problems have also been reviewed. Finally, future trends and conclusions on new generation injectable hydrogel nanocomposite bone scaffolds have been discussed in this article.

Influence of Organoclay on the Flame Retardancy and Thermal Insulation Property of Expandable Graphite/Polyurethane Foam

The rigid polyurethane foams (RPUFs) filled with organoclay cloisite 20A and expandable graphite (EG) were prepared by the one-step expanding foam method. Flame behavior, mechanical properties, and thermal conductivity of the composites were investigated. The vertical burning test (UL-94V) and limiting oxygen index (LOI) showed that the flame retardancy was increased proportionally with the content of EG in PU composite. However, the presence of EG filler impaired the thermal insulation and the compressive strength of the composite. In this report, we proved that organoclay could improve the compressive strength, thermal insulation, and flame retardancy of EG/polyurethane composites. This work can contribute to the development of environment-friendly flame-retardant products for green growth.

Effect of Evening Primrose Oil-Based Polyol on the Properties of Rigid Polyurethane⁻Polyisocyanurate Foams for Thermal Insulation

The article presents the results of research on the synthesis of a new biopolyol based on evening primrose oil, and its use in the production of rigid polyurethane⁻polyisocyanurate foams intended for thermal insulation. The obtained biopolyol was subjected to analytical, physicochemical, and spectroscopic tests (Fourier transform infrared (FTIR), ¹H NMR, 13C NMR) to confirm its suitability for the synthesis of polyurethane materials. Then, it was used for the partial replacement of the petrochemical polyol in the polyurethane formulation. Obtained rigid polyurethane⁻polyisocyanurate foams are characterized by a lower apparent density, brittleness, water absorption, and thermal conductivity coefficient λ. In addition, foams modified by biopolyols had a higher content of closed cells and higher aging resistance. The results of the conducted research showed that the use of the biopolyol based on evening primrose oil may be an alternative to petrochemical polyols. The research presented herein is perfectly consistent with the trends of sustainable development and the philosophy of green chemistry.