Creep performance of CNT reinforced glass fiber/epoxy composites: Roles of temperature and stress

Creep Testing of Thermoplastic Fiber-Reinforced Polymer Composite Tubular Coupons

Thermoplastic fiber-reinforced polymer composites (TP-FRPC) are gaining popularity in industry owing to characteristics such as fast part fabrication, ductile material properties and high resistance to environmental degradation. However, TP-FRPC are prone to time-dependent deformation effects like creep under sustained loading, which can lead to significant dimensional changes and affect the safe operation of structures. Previous research in this context has focused, mainly, on testing of flat coupons. In this study, a creep testing method for TP-FRPC tubular coupons was developed. Specimens were fabricated using tape winding and subjected to well-defined loading conditions, i.e., pure hoop tensile and pure axial compressive stress. Strain gauges and digital image correlation were both employed for strain measurements and were found to be in good agreement. The evolution of strain rate, Poisson's ratio and creep compliance were investigated. The prediction of experimental data by the Burgers model and the Findley's power law model were explored. The research findings suggest that the developed experimental and analysis approach provides valuable information for the design of material systems and structures.

Analysis of Three-Phase Structure of Epoxy Resin/CNT/Graphene by Molecular Simulation

In this study, the three-phase structure consisting of epoxy resin, carbon nanotubes (CNTs), and graphene, which is assumed to be the surface of carbon fiber, was simulated using molecular dynamics. Models in which the CNT number and initial position of CNT are varied were prepared in this study. Relaxation calculation for each three-phase model was implemented, and the movement of molecules was investigated. When CNTs are located between the graphene and epoxy at initial, how the epoxy approaches to graphene was discussed. Besides, interaction energies between CNT/graphene, CNT/epoxy, and graphene/epoxy were evaluated after relaxations. The value of the interaction energy between two individual molecules (epoxy resin and graphene, CNTs and graphene, epoxy resin and CNTs) among three-phase structure were obtained, respectively, and those mechanisms were discussed in this study.

Hydrothermal Aging of an Epoxy Resin Filled with Carbon Nanofillers

The effects of temperature and moisture on flexural and thermomechanical properties of neat and filled epoxy with both multiwall carbon nanotubes (CNT), carbon nanofibers (CNF), and their hybrid components were investigated. Two regimes of environmental aging were applied: Water absorption at 70 °C until equilibrium moisture content and thermal heating at 70 °C for the same time period. Three-point bending and dynamic mechanical tests were carried out for all samples before and after conditioning. The property prediction model (PPM) was successfully applied for the prediction of the modulus of elasticity in bending of manufactured specimens subjected to both water absorption and thermal aging. It was experimentally confirmed that, due to addition of carbon nanofillers to the epoxy resin, the sorption, flexural, and thermomechanical characteristics were slightly improved compared to the neat system. Considering experimental and theoretical results, most of the epoxy composites filled with hybrid carbon nanofiller revealed the lowest effect of temperature and moisture on material properties, along with the lowest sorption characteristics.

Cyclic Moisture Sorption and its Effects on the Thermomechanical Properties of Epoxy and Epoxy/MWCNT Nanocomposite

The aim of this work was to reveal the moisture absorption–desorption–resorption characteristics of epoxy and epoxy-based nanocomposites filled with different multiwall carbon nanotubes (MWCNTs) by investigating the reversibility of the moisture effect on their thermomechanical properties. Two types of MWCNTs with average diameters of 9.5 and 140 nm were used. For the neat epoxy and nanocomposite samples, the moisture absorption and resorption tests were performed in atmospheres with 47%, 73%, and 91% relative humidity at room temperature. Dynamic mechanical analysis was employed to evaluate the hygrothermal ageing effect for unconditioned and environmentally “aged” samples. It was found that moisture sorption was not fully reversible, and the extent of the irreversibility on thermomechanical properties was different for the epoxy and the nanocomposite. The addition of both types of MWCNTs to the epoxy resin reduced sorption characteristics for all sorption tests, improved the hygrothermal and reduced the swelling rate after the moisture absorption–desorption.