Effect of Borpolymer on Mechanical and Structural Parameters of Ultra-High Molecular Weight Polyethylene

The paper presents the results of studying the effect of borpolymer (BP) on the mechanical properties, structure, and thermodynamic parameters of ultra-high molecular weight polyethylene (UHMWPE). Changes in the mechanical characteristics of polymer composites material (PCM) are confirmed and complemented by structural studies. X-ray crystallography (XRC), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), and infrared spectroscopy (IR) were used to study the melting point, morphology and composition of the filler, which corresponds to the composition and data of the certificate of the synthesized BP. Tensile and compressive mechanical tests were carried out in accordance with generally accepted standards (ASTM). It is shown that BP is an effective modifier for UHMWPE, contributing to a significant increase in the deformation and strength characteristics of the composite: tensile strength of PCM by 56%, elongation at break by 28% and compressive strength at 10% strain by 65% compared to the initial UHMWPE, due to intensive changes in the supramolecular structure of the matrix. Structural studies revealed that BP does not chemically interact with UHMWPE, but due to its high adhesion to the polymer, it acts as a reinforcing filler. SEM was used to establish the formation of a spherulite supramolecular structure of polymer composites.

Effect of Nanofillers on Tribological Properties of Polymer Nanocomposites: A Review on Recent Development

Polymer nanocomposites with enhanced performances are becoming a trend in the current research field, overcoming the limitations of bulk polymer and meeting the demands of market and society in tribological applications. Polytetrafluoroethylene, poly(ether ether ketone) and ultrahigh molecular weight polyethylene are the most popular polymers in recent research on tribology. Current work comprehensively reviews recent advancements of polymer nanocomposites in tribology. The influence of different types of nanofiller, such as carbon-based nanofiller, silicon-based nanofiller, metal oxide nanofiller and hybrid nanofiller, on the tribological performance of thermoplastic and thermoset nanocomposites is discussed. Since the tribological properties of polymer nanocomposites are not intrinsic but are dependent on sliding conditions, direct comparison between different types of nanofiller or the same nanofiller of different morphologies and structures is not feasible. Friction and wear rate are normalized to indicate relative improvement by different fillers. Emphasis is given to the effect of nanofiller content and surface modification of nanofillers on friction, wear resistance, wear mechanism and transfer film formation of its nanocomposites. Limitations from the previous works are addressed and future research on tribology of polymer nanocomposites is proposed.