Orange peel waste from juicing as raw material for plastic composites intended for use in food packaging

Incorporation of Argan Shell Flour in a Biobased Polypropylene Matrix for the Development of High Environmentally Friendly Composites by Injection Molding

In this study, a new composite material is developed using a semi bio-based polypropylene (bioPP) and micronized argan shell (MAS) byproducts. To improve the interaction between the filler and the polymer matrix, a compatibilizer, PP-g-MA, is used. The samples are prepared using a co-rotating twin extruder followed by an injection molding process. The addition of the MAS filler improves the mechanical properties of the bioPP, as evidenced by an increase in tensile strength from 18.2 MPa to 20.8 MPa. The reinforcement is also observed in the thermomechanical properties, with an increased storage modulus. The thermal characterization and X-ray diffraction indicate that the addition of the filler leads to the formation of α structure crystals in the polymer matrix. However, the addition of a lignocellulosic filler also leads to an increased affinity for water. As a result, the water uptake of the composites increases, although it remains relatively low even after 14 weeks. The water contact angle is also reduced. The color of the composites changes to a color similar to wood. Overall, this study demonstrates the potential of using MAS byproducts to improve their mechanical properties. However, the increased affinity with water should be taken into account in potential applications.

Development and Characterization of Biosorbent Film from Eggshell/Orange Waste Enriched with Banana Starch

The conversion of waste into a valuable product is regarded as a promising alternative to relieving the burden of solid waste management and could be beneficial to the environment and humans. This study is focused on utilizing eggshell and orange peel enriched with banana starch to fabricate biofilm via the casting technique. The developed film is further characterized by field emission scanning electron microscope (FESEM), energy dispersive X-ray spectroscopy (EDX), atomic force microscopy (AFM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). The physical properties of films, including thickness, density, color, porosity, moisture content, water solubility, water absorption, and water vapor permeability, were also characterized. The removal efficiency of the metal ions onto film at different contact times, pH, biosorbent dosages, and initial concentration of Cd(II) were analyzed using atomic absorption spectroscopy (AAS). The film's surface was found to have a porous and rough structure with no cracks, which can enhance the target analytes interactions. EDX and XRD analyses confirmed that eggshell particles were made of calcium carbonate (CaCO₃), and the appearance of the main peak at 2θ = 29.65° and 2θ = 29.49° proves the presence of calcite in eggshells. The FTIR indicated that the films contain various functional groups, such as alkane (C-H), hydroxyl (-OH), carbonyl (C=O), carbonate (CO₃^2-), and carboxylic acid (-COOH) that can act as biosorption materials. According to the findings, the developed film exhibits a notable enhancement in its water barrier properties, thereby leading to improved adsorption capacity. The batch experiments showed that the film obtained the maximum removal percentage at pH = 8 and 6 g of biosorbent dose. Notably, the developed film could reach sorption equilibrium within 120 min at the initial concentration of 80 mg/L and remove 99.95% of Cd(II) in the aqueous solutions. This outcome presents potential opportunities for the application of these films in the food industry as both biosorbents and packaging materials. Such utilization can significantly enhance the overall quality of food products.

Antimicrobial activity of orange juice processing waste in powder form and its suitability to produce antimicrobial packaging

Orange peel essential oil is a common value-added product from orange juice processing waste. It is antimicrobial and used to produce antimicrobial films and coatings. This study reports the first development of antimicrobial films using orange peel as powder (OPP) instead of the extracted essential oil. The OPP amount needed for antimicrobial films was determined by studying the OPP effects on conidia germination inhibition (minimum inhibitory concentration (MIC)) and mycelial growth reduction for Botrytis cinerea, Aspergillus niger, and Penicillium sp. This amount was incorporated into linear low-density polyethylene using plastic processing machinery. The resulting LLDPE/OPP composite film was characterized for antimicrobial activity against Botrytis cinerea, antimicrobial compound release, and mechanical, barrier, and optical properties. We found the same OPP MIC (8.4 mg OPP/mL air) for the three fungi although their mycelial growth kinetics and conidia germination inhibition periods varied with OPP amount differently. 21.1 mg OPP/mL air completely inhibited the germination of Penicillium sp., B. cinerea, and A. niger conidia for 3, 2, and 1 days. The antimicrobial film was a LLDPE/OPP composite with 46% plastic replacement that reduced B. cinerea growth by 30% over a 7-day storage period at 23 °C, less than OPP due to limonene/citral reduction during processing. Plastic replacement resulted in films with the barrier and mechanical properties of plastics commonly used in food packaging. This study demonstrates the OPP antimicrobial capacity against food spoilage microorganisms and its suitability to produce antimicrobial packaging for food applications and presents a novel approach to utilizing orange juice processing waste.

Novel Antioxidant Packaging Films Based on Poly(ε-Caprolactone) and Almond Skin Extract: Development and Effect on the Oxidative Stability of Fried Almonds

Antioxidant films based on poly(ε-caprolactone) (PCL) containing almond skin extract (ASE) were developed for food packaging applications. The effect of ASE incorporation on the morphological, structural, colour, mechanical, thermal, barrier and antioxidant properties of the prepared films were evaluated. The structural, tensile and thermal properties of the films were not altered due to ASE addition. Although no significant differences were observed for the oxygen permeability of samples, some increase in water absorption and water vapour permeability was observed for active films due to the hydrophilic character of ASE phenolic compounds, suggesting the suitability of this novel packaging for fatty foods conservation. ASE conferred antioxidant properties to PCL films as determined by the DPPH radical scavenging activity. The efficiency of the developed films was evaluated by the real packaging application of fried almonds at different ASE contents (0, 3, 6 wt.%) up to 56 days at 40 °C. The evolution of peroxide and p-anisidine values, hexanal content, fatty acid profile and characteristic spectroscopy bands showed that active films improved fried almonds stability. The results suggested the potential of PCL/ASE films as sustainable and antioxidant food packaging systems to offer protection against lipid oxidation in foods.