Preparation of molecularly imprinted fluorescence sensor based on carbon quantum dots via precipitation polymerization for fluorescence detection of tetracycline

Paper-Based Fluorescent Sensor for Rapid Multi-Channel Detection of Tetracycline Based on Graphene Quantum Dots Coated with Molecularly Imprinted Polymer

In this paper, we developed a paper-based fluorescent sensor using functional composite materials composed of graphene quantum dots (GQDs) coated with molecularly imprinted polymers (MIPs) for the selective detection of tetracycline (TC) in water. GQDs, as eco-friendly fluorophores, were chemically grafted onto the surface of paper fibers. MIPs, serving as the recognition element, were then wrapped around the GQDs via precipitation polymerization using 3-aminopropyltriethoxysilane (APTES) as the functional monomer. Optimal parameters such as quantum dot concentration, grafting time, and elution time were examined to assess the sensor's detection performance. The results revealed that the sensor exhibited a linear response to TC concentrations in the range of 1 to 40 µmol/L, with a limit of detection (LOD) of 0.87 µmol/L. When applied to spiked detection in actual water samples, recoveries ranged from 103.3% to 109.4%. Overall, this paper-based fluorescent sensor (MIPs@GQDs@PAD) shows great potential for portable, multi-channel, and rapid detection of TC in water samples in the future.

Carbon dots-based fluorescent probe for detection of foodborne pathogens and its potential with microfluidics

Concern about food safety triggers demand on rapid, accurate and on-site detection of foodborne pathogens. Among various fluorescent probes for detection, carbon dots (CDs) prepared by carbonization of carbon-rich raw materials show extraordinary performance for their excellent and tailorable photoluminescence property, as well as their facilely gained specificity by surface customization and modification. CDs-based fluorescent probes play a crucial role in many pathogenic bacteria sensing systems. In addition, microfluidic technology with characteristics of portability and functional integration is expected to combine with CDs-based fluorescent probes for point-of-care testing (POCT), which can further enhance the detection property of CDs-based fluorescent probes. Here, this paper reviews CDs-based bacterial detection methods and systems, including the structural modulation of fluorescent probes and pathogenic bacteria detection mechanisms, and describes the potential of combining CDs with microfluidic technology, providing reference for the development of novel rapid detection technology for pathogenic bacteria in food.

Synthesis of molecularly imprinted polymers based on nitrogen-doped carbon dots for specific detection of chlortetracycline by reversed phase microemulsion method

Among the tetracycline antibiotics, chlortetracycline (CTC) is the most frequently used antibiotic except for tetracycline (TC) for enhancing the ability of the organism to fight bacterial infections. The poor metabolism and degradability of CTC can cause serious health effects. Most studies have focused on the detection and analysis of TC, and research on CTC is relatively scarce. This is because the structures of CTC and TC and oxytetracycline (OTC) are extremely similar, and even indistinguishable. In this study, CTC was used as a template molecule and a molecularly imprinted layer was coated on the surface of highly fluorescent N-CDs using a reversed-phase microemulsion method to form N-CDs@MIPs. It was possible to specifically identify CTC without the influence of TC and OTC, which are extremely similar in structure. By comparing with the non-imprinted polymer (N-CDs@NIPs), it exhibited high sensitivity and selectivity with an imprinting factor of 2.02. And it was used in the determination of CTC in milk with recoveries and relative standard deviations of 96.7%-109.8% and 0.64%-3.27%, respectively, with high accuracy and precision. The specificity of the measurement is excellent compared with other assays, and it is a valid and reliable assay.

Upcycling Waste: Citrus limon Peel-Derived Carbon Quantum Dots for Sensitive Detection of Tetracycline in the Nanomolar Range

In this work, a sustainable method was developed for the production of water-soluble carbon quantum dots employing a green approach. The synthetic protocol was employed using the microwave pyrolysis technique, while lemon peel served as a carbon precursor. Fabrication of highly fluorescent lemon-peel-derived CQDs (LP-CQDs) having inherent nitrogen functionality was validated by X-ray photoelectron spectroscopy, FTIR, X-ray diffraction, Raman spectroscopic analysis, and TEM techniques. The average particle size of fabricated LP-CQDs was 4.46 nm. LP-CQDs yielded a remarkable quantum yield of 49.5%, which displayed excellent salinity, photostability, storage time, conditions, and pH stability. LP-CQDs displayed encouraging results for tetracycline (TC) detection using a PL turn-off approach. The sensitivity of LP-CQDs toward TC was seen in a nanomolar range having a detection limit of 50.4 nM. Method validation was comprehensively studied to ensure the precision of the nanosensor. A complete analysis of different photophysical parameters of LP-CQDs was performed with TC to gain a deeper understanding of the sensing mechanism. Fabricated LP-CQDs showed fluorescence quenching toward TC, elucidated by the inner filter effect (IFE) mechanism. The synthesized nanoprobe demonstrated a lesser detection limit with a broad linear range, enabling facile, cheap, environmentally friendly, and fast detection of TC. Practicality of the detection method was assessed through analysis of real samples, resulting in satisfactory recovery percentage and relative standard deviation with respect to the developed probes. Furthermore, LP-CQDs were used as fluorescent inks and to fabricate paper-based fluorescent strips. This study lays the door for the sensing platform of LP-CQDs toward detection of TC, which may impact the potential role of environmental sustainability.

Recent Advances in Molecularly Imprinted Polymers for Antibiotic Analysis

The abuse and residues of antibiotics have a great impact on the environment and organisms, and their determination has become very important. Due to their low contents, varieties and complex matrices, effective recognition, separation and enrichment are usually required prior to determination. Molecularly imprinted polymers (MIPs), a kind of highly selective polymer prepared via molecular imprinting technology (MIT), are used widely in the analytical detection of antibiotics, as adsorbents of solid-phase extraction (SPE) and as recognition elements of sensors. Herein, recent advances in MIPs for antibiotic residue analysis are reviewed. Firstly, several new preparation techniques of MIPs for detecting antibiotics are briefly introduced, including surface imprinting, nanoimprinting, living/controlled radical polymerization, and multi-template imprinting, multi-functional monomer imprinting and dummy template imprinting. Secondly, several SPE modes based on MIPs are summarized, namely packed SPE, magnetic SPE, dispersive SPE, matrix solid-phase dispersive extraction, solid-phase microextraction, stir-bar sorptive extraction and pipette-tip SPE. Thirdly, the basic principles of MIP-based sensors and three sensing modes, including electrochemical sensing, optical sensing and mass sensing, are also outlined. Fourthly, the research progress on molecularly imprinted SPEs (MISPEs) and MIP-based electrochemical/optical/mass sensors for the detection of various antibiotic residues in environmental and food samples since 2018 are comprehensively reviewed, including sulfonamides, quinolones, β-lactams and so on. Finally, the preparation and application prospects of MIPs for detecting antibiotics are outlined.

Biomass-derived carbon dots as a sensitive and selective dual detection platform for fluoroquinolones and tetracyclines

A novel carbon dot (CD) was synthesized through the facile and simple hydrothermal method from Curcuma amada, as the precursor for the first time. These CDs with an average diameter of 4.6 nm display blue fluorescence, with excitation/emission maxima at 360/445 nm and a quantum yield of 14.1%. It exhibited high stability under different conditions and was characterized using various techniques. These CDs can be employed as a dual-sensing platform to detect tetracyclines and fluoroquinolones, two antibiotic classes. Even though antibiotics are regarded as an inevitable commodity, overuse and improper management of discarded antibiotics pose a severe threat to the environment. Herein, we developed a dual-sensing, biocompatible sensor with high selectivity and sensitivity to detect antibiotics. CD was employed as a fluorescence probe and detected tetracycline and fluoroquinolone antibiotic through inner filter effect-based fluorescence quenching and hydrogen bonding-based enhancement process, respectively. The linear range was 0-16 μM and the detection limit was 33 nM for tetracycline and 2 nM for fluoroquinolone antibiotic. As an electrochemical probe, CD selectively detected tetracycline with a lower detection limit of 0.5 nM over a linear range of 0-16 μM. Using both methods, a real sample analysis of the developed sensor exhibited accurate reliability and precision.

Quantum dots based sensitive nanosensors for detection of antibiotics in natural products: A review

Residual antibiotics in food products originated from administration of the antibiotics to animals may be accumulated through food metabolism in the human body and endanger safety and health. Thus, developing a prompt and accurate way for detection of antibiotics is a crucial issue. The zero-dimensional fluorescent probes including metals based, carbon and graphene quantum dots (QDs), are highly sensitive materials to use for the detection of a wide range of antibiotics in natural products. These QDs demonstrate unique optical properties like tunable photoluminescence (PL) and excitation-wavelength dependent emission. This study investigates the trends related to carbon and metal based QDs preparation and modification, and their diverse detection application. We discuss the performance of QDs based sensors application in various detection systems such as photoluminescence, photoelectrochemical, chemiluminescence, electrochemiluminescence, colorimetric, as well as describing their working principles in several samples. The detecting mechanism of a QDs-based sensor is dependent on its properties and specific interactions with particular antibiotics. This review also tries to describe environmental application and future perspective of QDs for antibiotics detection.

Selective recognition of tetracycline residues in animal derived samples based on molecularly imprinted microspheres from silica-stabilised Pickering emulsion polymerisation

Novel molecularly imprinted polymers for selective binding of tetracyclines were synthesised through oil-in-water Pickering emulsion polymerisation with SiO₂ particles as stabilisers. The products were used for solid phase extraction coupled with high-performance liquid chromatography to detect trace tetracycline and oxytetracycline in animal-derived samples. The SPE materials were characterised in detail by Fourier transform infrared spectrometry, scanning electron microscopy and thermogravimetry analysis. The imprinted polymers displayed high adsorption capacity, fast binding process and high selectivity through evaluation of adsorption performance employing kinetic, static adsorption and selectivity experiments. Under optimum detection conditions, good linearity (12 to 121 µg kg^-1) and limits of detection (1.8 to 1.9 μg kg^-1) for tetracyclines were obtained. In addition, satisfactory recoveries of 75% to 115 % were also achieved by spiking tetracyclines into milk, chicken, fish and pork samples, giving direct evidence of real practicality of our proposed separation method.