High-Durable, Radiative-Cooling, and Heat-Insulating Flexible Films Enabled by a Bioinspired Dictyophora-Like Structure

Radiative cooling, achieved by selectively emitting thermal radiation to outer space, holds great promise for addressing global energy challenges and mitigating the effects of climate change. However, most radiative cooling materials face limitations in effectively cooling in high-heat environments, and their performance deteriorates significantly with prolonged outdoor use. These shortcomings restrict their widespread application in various settings. To address this, we draw inspiration from the unique biostructure of dictyophora and propose a novel hollow@porous radiative cooling film by integrating hollow microparticles and porous polymer. The fabricated hollow@porous flexible film exhibits high sunlight reflection (93.7%), strong infrared emissivity (89.1%), as well as ultralow thermal conductivity (17.56 mW/m k). The daytime cooling performance of the prepared cooler is experimentally demonstrated with a marked temperature decrease to 17.4 °C under a peak solar intensity of 980 W/m2. Furthermore, the unique hollow@porous structure also strengthens the film's long-term durability by incorporating weather resistance and self-cleaning properties, which ensures stable and efficient radiative cooling performance even in harsh climatic conditions. This advancement in radiative cooling materials opens up new possibilities for thermal management, energy conservation, and cooling of solar panels, engine components, electronic equipment, new energy batteries, etc.

Facile fabrication of self-roughened surfaces for superhydrophobic coatings via polarity-induced phase separation strategy

Rough structures have gained increasing attention since they are essential for surfaces with special wettability, which can be used for various applications. It is still a challenge to find a low-cost and simple way to fabricate rough surfaces despite extensive efforts. Herein, we report a facile strategy to fabricate self-roughened surfaces based on polarity-induced phase separation. The strategy relies on the migration of flexible chains of the nonpolar polysiloxane to airside, driven by surface tension and polarity difference with the polar crosslinker, which forms a self-roughened surface with numerous protrusions. It is worth noting that this strategy does not require strict control of procedures, since it is insensitive to environmental changes unlike other phase separation methods, as shown by the results of systematic studies on several key parameters. Modified fabrics and coatings exhibit excellent superhydrophobicity with a water contact angle higher than 160°. Moreover, due to the strong hydrogen bonds formed by the polar urea groups of the crosslinker with substrates, the abrasion resistance of the coating is significantly enhanced. It is believed that the proposed novel and facile strategy will be a promising candidate for industrial manufacturing.

Aerogel-Functionalized Thermoplastic Polyurethane as Waterproof, Breathable Freestanding Films and Coatings for Passive Daytime Radiative Cooling

Passive daytime radiative cooling (PDRC) is an emerging sustainable technology that can spontaneously radiate heat to outer space through an atmospheric transparency window to achieve self-cooling. PDRC has attracted considerable attention and shows great potential for personal thermal management (PTM). However, PDRC polymers are limited to polyethylene, polyvinylidene fluoride, and their derivatives. In this study, a series of polymer films based on thermoplastic polyurethane (TPU) and their composite films with silica aerogels (aerogel-functionalized TPU (AFTPU)) are prepared using a simple and scalable non-solvent-phase-separation strategy. The TPU and AFTPU films are freestanding, mechanically strong, show high solar reflection up to 94%, and emit strongly in the atmospheric transparency window, thereby achieving subambient cooling of 10.0 and 7.7 °C on a hot summer day for the TPU and AFTPU film (10 wt%), respectively. The AFTPU films can be used as waterproof and moisture permeable coatings for traditional textiles, such as cotton, polyester, and nylon, and the highest temperature drop of 17.6 °C is achieved with respect to pristine nylon fabric, in which both the cooling performance and waterproof properties are highly desirable for the PTM applications. This study opens up a promising route for designing common polymers for highly efficient PDRC.

Drug-Loaded, Polyurethane Coated Nitinol Stents for the Controlled Release of Docetaxel for the Treatment of Oesophageal Cancer

For several decades, self-expanding metal stents (SEMSs) have shown significant clinical success in the palliation of obstructive metastatic oesophageal cancer. However, these conventional oesophageal stents can suffer from stent blockage caused by malignant tumour cell growth. To overcome this challenge, there is growing interest in drug-releasing stents that, in addition to palliation, provide a sustained and localized release of anticancer drugs to minimise tumour growth. Therefore, in this study we prepared and evaluated an oesophageal stent-based drug delivery platform to provide the sustained release of docetaxel (DTX) for the treatment of oesophageal cancer-related obstructions. The DTX-loaded oesophageal stents were fabricated via dip-coating of bare nitinol stents with DTX-polyurethane (PU) solutions to provide PU coated stents with DTX loadings of 1.92 and 2.79% w/w. Mechanical testing of the DTX-PU coated stents revealed that an increase in the drug loading resulted in a reduction in the ultimate tensile strength, toughness and Young’s modulus. In vitro release studies showed a sustained release of DTX, with ~80–90% released over a period of 33 days. While the DTX-loaded stents exhibited good stability to gamma radiation sterilisation, UV sterilisation or accelerated storage at elevated temperatures (40 °C) resulted in significant DTX degradation. Cell proliferation, apoptosis and Western blotting assays revealed that the DTX released from the stents had comparable anticancer activity to pure DTX against oesophageal cancer cells (KYSE-30). This research demonstrates that the dip-coating technique can be considered as a promising approach for the fabrication of drug-eluting stents (DESs) for oesophageal cancer treatment.