Preparation of Flame-Retardant Glass Fiber-Reinforced Epoxy by Vacuum-Assisted Resin Infusion Process with Deep Eutectic Point Curing Agent

Enhancing the flame resistance of fiber-reinforced epoxy resins will broaden its potential applications. However, the inclusion of a flame retardant in epoxy resins with a curing agent shortens the process, posing a challenge for the production of flame-retardant composites. In this work, the process performance of flame-retardant epoxy resins was improved by using deep eutectic solvents (DES) as the curing agent. The gelation time and viscosity curves show that a flame-retardant epoxy with DES has excellent processability at 60 °C with a viscosity of 430 mPa∙s. Then, the manufacturing and experimental investigation of the flame-retardant epoxy (E-M) and composite (E-MC) were conducted. The fire retardancy of E-M is rated V0 according to the UL-94 test, and its limiting oxygen index (LOI) value is 36.8%. The mechanical performance of the epoxy resins is also slightly improved by the addition of the flame retardant. E-MC was successfully prepared by vacuum assisted resin infusion (VARI) with a V2 rating in the UL94 test, and extraordinary mechanical properties were achieved. The remarkable flame retardancy and mechanical properties of both the matrix and the composites demonstrate that the DES curing agent can homogenously disperse in and cure the epoxy resins. This work provides an inexpensive yet effective solution for manufacturing flame retardant composites by VARI, enabling the application of a range of flame retardants to composite materials.

The Flame Retardant and Mechanical Properties of the Epoxy Modified by an Efficient DOPO-Based Flame Retardant

Currently, the mechanical performance reduction caused by excessive phosphorus content in the halogen-free flame-retardant EP has been an obstacle to its extensive application. This study presents the effective synthesis of a novel flame-retardant BDD with great efficiency, achieving an optimum phosphorus level of merely 0.25 wt %. The structure of BDD was verified by FTIR, 1H NMR, 31P NMR and XPS spectra. To investigate the flame-retardant properties of BDD, several EPs with various phosphorus levels were synthesized. The addition of phosphorus to the EP significantly increases its LOI value from 25.8% to 33.4% at a phosphorus level of 0.25 wt%. Additionally, the resin achieves a V-0 grade in the UL 94 test. The P-HRR and THR of the modified resin measured by the cone calorimeter are also significantly reduced. At the same time, the addition of a modest quantity of BDD has a minimal impact on the mechanical properties of epoxy resin. This study shows that the removal of hydroxyl groups significantly enhances the fire resistance of phosphate-based flame retardants, thereby providing a novel approach to synthesizing efficient flame retardants.

Preparation of Naphthalene-Based Flame Retardant for High Fire Safety and Smoke Suppression of Epoxy Resin

One of the current challenges in the development of flame retardants is the preparation of an environmentally friendly multi-element synergistic flame retardant to improve the flame retardancy, mechanical performance, and thermal performance of composites. This study synthesized an organic flame retardant (APH) using (3-aminopropyl) triethoxysilane (KH-550), 1,4-phthalaadehyde, 1,5-diaminonaphthalene, and 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) as raw materials, through the Kabachnik-Fields reaction. Adding APH to epoxy resin (EP) composites could greatly improve their flame retardancy. For instance, UL-94 with 4 wt% APH/EP reached the V-0 rating and had an LOI as high as 31.2%. Additionally, the peak heat release rate (PHRR), average heat release rate (AvHRR), total heat release (THR), and total smoke produced (TSP) of 4% APH/EP were 34.1%, 31.8%, 15.2%, and 38.4% lower than EP, respectively. The addition of APH improved the mechanical performance and thermal performance of the composites. After adding 1% APH, the impact strength increased by 15.0%, which was attributed to the good compatibility between APH and EP. The TG and DSC analyses revealed that the APH/EP composites that incorporated rigid naphthalene ring groups had higher glass transition temperatures (Tg) and a higher amount of char residue (C₇₀₀). The pyrolysis products of APH/EP were systematically investigated, and the results revealed that flame retardancy of APH was realized by the condensed-phase mechanism. APH has good compatibility with EP, excellent thermal performance, enhanced mechanical performance and rational flame retardancy, and the combustion products of the as-prepared composites complied with the green and environmental protection standards which are also broadly applied in industry.

Synthesis of Hyperbranched Flame Retardants with Varied Branched Chains' Rigidity and Performance of Modified Epoxy Resins

To overcome the high flammability and brittleness of epoxy resins without sacrificing their glass transition temperature (Tg) and mechanical properties, three epoxy-terminated hyperbranched flame retardants (EHBFRs) with a rigid central core and different branches, named EHBFR-HB, EHBFR-HCM, and EHBFR-HBM, were synthesized. After chemical structure characterization, the synthesized EHBFRs were introduced into the diglycidyl ether of bisphenol A (DGEBA) and cured with 4, 4-diaminodiphenylmethane (DDM). The compatibility, thermal stability, mechanical properties, and flame retardancy of the resultant resins were evaluated. Results showed that all three EHBFRs could significantly improve the fire safety of cured resins, and 30 wt. % of EHBFRs (less than 1.0 wt. % phosphorus content) endowed cured DGEBA with a UL-94 V-0 rating. In addition, the increased rigidity of branches in EHBFRs could increase the flexural strength and modulus of cured resins, and the branches with appropriate rigidity were also beneficial for improving their room temperature impact strength and Tg.

Fabrication of two multifunctional phosphorus–nitrogen flame retardants toward improving the fire safety of epoxy resin

To improve the fire safety of epoxy resin (EP), two novel phosphorus–nitrogen flame retardants, which named as diphenyl allylphosphoramidate (DPCA) and N-allyl-P, P-diphenylphosphinic amide (DCA), were synthesized by acyl chloride reaction and introduced into EP for fabricating EP composites. The combustion tests showed that incorporation of 5 wt% DPCA or 5 wt% DCA into EP led to the exceptional limited oxygen index (LOI) value (27.1% or 31.6%). Besides, the peak of heat release rate of EP-5 wt% DPCA and EP-5 wt% DCA was reduced by 40.69% and 36.69%, respectively, compared to pure EP. The enhanced fire resistance of EP was ascribed to the trapping effect of fillers in the gas phase and the charring effect in the condensed phase. Furthermore, ultraviolet-visible spectra revealed that both EP-5 wt% DPCA and EP-5 wt% DCA have considerable transparency. This study is expected to broaden the application of EP in the industrial area.

Halogen-free and phosphorus-free flame retardants endow epoxy resin with high flame retardancy through crosslinking strategy

Epoxy resin (EPs) has been widely used in many fields in recent years, such as electronics, adhesives, coatings, and so on, which mainly benefiting from its excellent mechanical and chemical properties, low price and easy preparation. However, conventional EPs tend to be flammable, which significantly prevents their applications especially in high flame-resistance required areas. In this work, we introduce nitrile groups and the benzoxazine ring into the flame-retardant, followed by a simple heat treatment for a multiple cross-linking reaction in EPs. The resultant halogen/phosphorus-free and environmentally friendly network not only suppress the migration of the functional flame retardants from the substrate, but also shows much enhanced flame-retardant property, including the UL-94 rate, total heat release and reduced peak heat release rate. As a result, the thermosets can pass the UL-94 V-0 rate and reach a LOI value at 32.7% at a very low addition amount (10 wt%) of this cross-linked flame retardant.

A bio-based phosphaphenanthrene-containing derivative modified epoxy thermosets with good flame retardancy, high mechanical properties and transparency

Phosphorus-containing flame retardants have received huge interest for improving the flame retardant behavior of epoxy resins (EP) over the past few decades. However, a satisfactory flame retardant effect requires high loading of most phosphorus-containing flame retardants, resulting in the deterioration of the thermo-mechanical properties of the flame retardant epoxy materials. To obtain the flame retardant EP with excellent comprehensive properties, a furfurylamine-derived bis-DOPO derivative (FA-bis-DOPO) was synthesized from bio-mass as a co-curing agent for the flame retardant EP. The incorporation of FA-bis-DOPO improved the mechanical strength, the storage modulus and the glass transition temperature of the flame retardant epoxy materials, owing to its stiffness and reactivity with the epoxy matrix to enhance the crosslinking density. The EP material containing 5.0 wt% of FA-bis-DOPO had an LOI of 31.0% and UL-94 V-0 rating, while the pristine EP had an LOI of 23.5% and failed in the UL-94 test, manifesting the high flame retardant efficiency of FA-bis-DOPO. Besides, the cone calorimeter results demonstrated that the PHRR, THR, and TSP values of the EP/FA-bis-DOPO-5.0 were 28.0%, 27.3%, and 9.9% lower than those of the pristine EP, respectively. The flame retardant mechanism of FA-bis-DOPO could be attributed to the combined vapor and condensed phase mechanisms which involved the interruption of the combustion chain reaction by quenching radicals and the inhibition of the transfer of pyrolytic volatile products by catalytic formation of an intact and compact char layer.

Phosphorus-containing flame retardants have received huge interest for improving the flame retardant behavior of epoxy resins (EP) over the past few decades.

An Effective Method for Preparation of Liquid Phosphoric Anhydride and Its Application in Flame Retardant Epoxy Resin

A novel liquid phosphorous-containing flame retardant anhydride (LPFA) with low viscosity was synthesized from 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) and methyl tetrahydrophthalic anhydride (MeTHPA) and further cured with bisphenol-A epoxy resin E-51 for the preparation of the flame retardant epoxy resins. Both Fourier transform infrared spectroscopy (FT-IR), mass spectrometry (MS) and nuclear magnetic resonance (NMR) measurements revealed the successful incorporation of DOPO on the molecular chains of MeTHPA through chemical reaction. The oxygen index analysis showed that the LPFA-cured epoxy resin exhibited excellent flame retardant performance, and the corresponding limiting oxygen index (LOI) value could reach 31.2%. The UL-94V-0 rating was achieved for the flame retardant epoxy resin with the phosphorus content of 2.7%. With the addition of LPFA, the impact strength of the cured epoxy resins remained almost unchanged, but the flexural strength gradually increased. Meanwhile, all the epoxy resins showed good thermal stability. The glass transition temperature (T_g) and thermal decomposition temperature (T_d) of epoxy resin cured by LPFA decreased slightly compared with that of MeTHPA-cured epoxy resin. Based on such excellent flame retardancy, low viscosity at room temperature and ease of use, LPFA showed potential as an appropriate curing agent in the field of electrical insulation materials.