Natural rubber‐carbon black coagulation: Following the nanostructure evolution from a colloidal suspension to a composite

Research Progress of Natural Rubber Wet Mixing Technology

The performance of natural rubber (NR), a naturally occurring and sustainable material, can be greatly enhanced by adding different fillers to the NR matrix. The homogeneous dispersion of fillers in the NR matrix is a key factor in their ability to reinforce. As a novel method, wet mixing technology may effectively provide good filler dispersion in the NR matrix while overcoming the drawbacks of conventional dry mixing. This study examines the literature on wet mixing fillers, such as graphene, carbon nanotubes, silica, carbon black, and others, to prepare natural rubber composites. It also focuses on the wet preparation techniques and key characteristics of these fillers. Furthermore, the mechanism of filler reinforcement is also examined. To give guidance for the future development of wet mixing technology, this study also highlights the shortcomings of the current system and the urgent need to address them.

Preparation and application of carbon black-filled rubber composite modified with a multi-functional silane coupling agent

Carbon black (CB)-filled rubber composites are widely used for tire tread and other rubber products due to their good abrasion resistance and reinforcement. Numerous studies have been focused on the filler-rubber interaction with the aim of obtaining optimum performances. In order to investigate the effect of modification on properties of diene rubber composites, a modified CB-filled isoprene rubber (IR) composite was prepared with a multi-functional silane coupling agent, 2-aminoethyl-2-(3-triethoxysilylpropyl)aminoethyl disulfide (ATD). This modification significantly enhanced the CB-IR interaction and improved CB dispersion. For the modified CB/IR vulcanizates, the tensile strength, stress at 300% elongation, temperature rise, and dynamic loss coefficient were significantly improved at low ATD dosage (1.5 phr). Such modification provides an effective route to prepare CB-reinforced diene rubber composites with low hysteresis and improved mechanical properties.