Resin, cure, and polymer properties of photopolymerizable resins containing bio‐derived isosorbide

Fully Bio-Based Polymer Composites: Preparation, Characterization, and LCD 3D Printing

The present work aimed to prepare novel bio-based composites by adding fillers coming from agro-wastes to an acrylate epoxidized soybean oil (AESO) resin, using liquid crystal display (LCD) 3D printing. Different photocurable formulations were prepared by varying the reactive diluents, iso-bornyl methacrylate (IBOMA) and tetrahydrofurfuryl acrylate (THFA). Then, two fillers derived from different industrial wastes, corn (GTF) and wine (WPL-CF) by-products, were added to the AESO-based formulations to develop polymer composites with improved properties. The printability by LCD of the photocurable formulations was widely studied. Bio-based objects with different geometries were realized, showing printing accuracy, layer adhesion, and accurate details. The thermo-mechanical and mechanical properties of the 3D-printed composites were tested by TGA, DMA, and tensile tests. The results revealed that the agro-wastes' addition led to a remarkable increase in the elastic modulus, tensile strength, and glass transition temperature in the glassy state for the systems containing IBOMA and for flexible structures in the rubbery region for systems containing THFA. AESO-based polymers demonstrated tunable properties, varying from rigid to flexible, in the presence of different diluents and biofillers. This finding paves the way for the use of this kind of composite in applications, such as biomedical for the realization of prostheses.

A Study of Isosorbide Synthesis from Sorbitol for Material Applications Using Isosorbide Dimethacrylate for Enhancement of Bio-Based Resins

Bio-based cross-linkers can fulfill the role of enhancing additives in bio-sourced curable materials that do not compare with artificial resin precursors. Isosorbide dimethacrylate (ISDMMA) synthesized from isosorbide (ISD) can serve as a cross-linker from renewable sources. Isosorbide is a bicyclic carbon molecule produced by the reaction modification of sorbitol and the optimal conditions of this reaction were studied in this work. The reaction temperature of 130 °C and 1% w/w amount of para-toluenesulfonic acid (p-TSA) were determined as optimal and resulted in a yield of 81.9%. Isosorbide dimethacrylate was synthesized via nucleophilic substitution with methacrylic anhydride (MAA) with the conversion of 94.1% of anhydride. Formed ISD and ISDMMA were characterized via multiple verification methods (FT-IR, MS, 1H NMR, and XRD). Differential scanning calorimetry (DSC) proved the curability of ISDMMA (activation energy Ea of 146.2 kJ/mol) and the heat-resistant index of ISDMMA (Ts reaching value of 168.9) was determined using thermogravimetric analysis (TGA). Characterized ISDMMA was added to the precursor mixture containing methacrylated alkyl 3-hydroxybutyrates (methyl ester M3HBMMA and ethyl ester E3HBMMA), and the mixtures were cured via photo-initiation. The amount of ISDMMA cross-linker increased all measured parameters obtained via dynamic mechanical analysis (DMA), such as storage modulus (E') and glass transition temperature (Tg), and the calculated cross-linking densities (νe). Therefore, the enhancement influence of bio-based ISDMMA on resins from renewable sources was confirmed.

High Tg, Bio-Based Isosorbide Methacrylate Resin Systems for Vat Photopolymerization

The use of isosorbide-derived polymers has garnered significant attention in recent decades as a high-performance, renewable material sourced from biomass. Of particular interest is isosorbide methacrylate, which possesses low viscosity (<500 cps), high thermal properties (T_g ≈ 220 °C), and high modulus (>4 GPa). These characteristics present a promising opportunity to replace BPA-derived methacrylate compounds in various applications. This investigation aims to synthesize and characterize isosorbide-based low-viscosity resin systems for 3D printing. The resin blends are composed of isosorbide methacrylate and two bio-renewable methacrylates, furfuryl methacrylate (FM) and bis-hydroxymethyl-furan methacrylate (BHMF-M), polymerized through a digital light processing (DLP) technique. The addition of the bio-based co-monomers serves to enhance the fracture toughness of the brittle isosorbide methacrylate crosslinked homopolymer (G_Ic = 37 J/m²). The resulting polymers exhibit T_g values greater than 200 °C and G_Ic around 100 J/m². These resin systems hold potential for imparting high bio-based content to polymers used in additive manufacturing for high-performance applications.

Superior Properties through Feedstock Development for Vat Photopolymerization Additive Manufacturing of High-Performance Biobased Feedstocks

Vat photopolymerization additive manufacturing (Vat AM) technologies have found niche industrial use being able to produce personalized parts in moderate quantity. However, Vat AM lacks in its ability to produce parts of satisfactory thermal and mechanical properties for structural applications. The purpose of this investigation was to develop high-performance resins with glass transition temperatures (Tg) above 200 °C for Vat AM, evaluate the properties of the produced thermosets and establish a structure–property relationship of the thermosets produced. Herein, we have developed SLA-type resins that feature bio-derived monomer hesperetin trimethacrylate (HTM) synthesized from the flavonone hesperetin. Diluents 4-acryloyl morpholine, styrene, 4-methyl styrene and 4-tert butylstyrene (tbutylsty) were photocured with HTM as the monomer and all produced thermosets with Tg values above 200 °C. Investigations of suitable crosslinkers urethane dimethacrylate, the vinyl ester CN 151 and Ebecryl 4859 (Eb4859) showed that each crosslinker displayed different benefits when formulated with HTM as the monomer and tbutylSty as the diluent (HTM:crosslinker:tbutylSty with mass ratio 2:1:2). The crosslinker CN 151 produced the thermoset of greatest onset of thermal decomposition temperature (T₀) of 352 °C. Eb4859 produced the thermoset of highest tensile strength, 19 ± 7 MPa, amongst the set of varied crosslinkers. The formulation featuring UDM (HTM:UDM:tbutysty) offered ease of processing and was seemingly the easiest to print. Investigations of reactive diluent showed that styrene produced the thermoset of the highest extent of cure and the overall highest tensile strength, 25 ± 5 MPa, while tbutylSty produced the thermoset with the greatest Tan-δ Tg, 231 °C. HTM was synthesized, formulated with diluents, crosslinkers and initiators. The HTM resins were then 3D printed to produce thermosets of Tg values greater than 200 °C. The polymer properties were evaluated and a structure–reactivity relationship was discussed.