Chalcone derived bis-organosilane and its magnetic nanoparticles: Unveiling precision in selective Cu(II) ion detection and elucidating biocompatibility

The escalating concern regarding the adverse effects of metal ion toxicity on both human health and environmental ecosystems necessitates the development of efficient detection methodologies. This study presents a focused investigation on the selective and sensitive detection of Cu(II) ions employing hybrid magnetic nanoparticles derived from chalcone-based bis-organosilane. These nanoparticles exhibit a notably low detection limit in the nano-scale range, rendering the sensor highly sensitive to Copper(II) ion detection while maintaining robust anti-interference capabilities, even in the presence of diverse metal ions. Real sample analysis confirms the sensor's efficacy in detecting Cu(II) ions below WHO-prescribed levels. Computational analyses reveal molecular interactions and biological activities, including potent antibacterial and antioxidant properties, suggesting promising applications. Furthermore, the biological effectiveness of chalcone-derived bis-organosilane is investigated, unveiling notable antibacterial efficacy and also exhibiting potential as a scavenger of free radicals, indicating promising applications in both antibacterial and antioxidant domains.

Unveiling the power of MXenes: Solid lubrication perspectives and future directions

The interaction between two surfaces leads to the generation of friction and wear of material. Friction and wear are some of the major challenges that may readily be overcome by the third part of tribology called lubrication. Utilizing solid lubricants including polymers, carbon-based materials, soft metals, transition metal dichalcogenides, along with their potential benefits and drawbacks in dry environments can reduce friction. Recently, an emerging class of two-dimensional (2D) transition metal nitrides, carbides or carbonitrides commonly known as MXenes have emerged as an attractive alternative for solid lubrication because of their ability to establish wear-resistant tribo layers and well as low friction and shear strength. Furthermore, the inherent hydrophilic nature of these substances has led to limited dispersion stability and phase compatibility when combined with pure base oils. As a result, their potential use as solid lubricants and lubricant additives has been impeded. To address this issue and enhance the applicability of MXenes as solid lubricants, their surface modification can be an attractive tool. Therefore, this review provides a succinct summary of the current state-of-the-art in surface functionalization of MXenes, a subject that has not yet been thoroughly addressed. Further, the mechanical behavior of MXenes and composites has been discussed, followed by the potential of MXenes as a solid lubricant at micro- and macro-scale. Finally, the existing opportunities and challenges of the research area have been discussed with possible future research directions. We believe, this article will be a valuable resource for MXenes and opens the door to improve the chemical, physical and mechanical properties of MXenes in various applications, such as solid lubrication.

Scaling up the fabrication of wafer-scale Ni-MoS2/WS2 nanocomposite moulds using novel intermittent ultrasonic-assisted dual-bath micro-electroforming

In the scale-up fabrication process for electroformed Ni-MoS2/WS2 composite moulds, the formulation of nanosheets is critical, since the size, charge, and their distribution can largely affect the hardness, surface morphology and tribological properties of the moulds. Additionally, the long-term dispersion of hydrophobic MoS2/WS2 nanosheets in a nickel sulphamate solution is problematic. In this work, we studied the effect of ultrasonic power, processing time, surfactant types and concentrations on the properties of nanosheets to elaborate their dispersion mechanism and control their size and surface charge in divalent nickel electrolyte. The formulation of MoS2/WS2 nanosheets was optimized for effective electrodeposition along with nickel ions. A novel strategy of intermittent ultrasonication in the dual bath was proposed to resolve the problem of long-term dispersion, overheating, and deterioration of 2D material deposition under direct ultrasonication. Such strategy was then validated by electroforming 4-inch wafer-scale Ni-MoS2/WS2 nanocomposite moulds. The results indicated that the 2D materials were successfully co-deposited into composite moulds without any defects, along with the mould microhardness increasing by ∼2.8 times, the coefficient of friction reducing by two times against polymer materials, and the tool life increasing up to 8 times. This novel strategy will contribute to the industrial manufacturing of 2D material nanocomposites under ultrasonication process.

Effect of Interfacial Interaction on the Demolding Deformation of Injection Molded Microfluidic Chips

During the demolding process, the interfacial interaction between the polymer and the metal mold insert will lead to the deformation of the micro-structure, which will directly affect the molding quality and performance of injection molded microfluidic chips. In this study, the demolding quality of micro-channels and micro-mixing structures of polycarbonate (PC), polymethyl methacrylate (PMMA), cyclic olefin copolymer (COC), and polystyrene (PS) microfluidic chips for heavy metal detection were investigated by molding experiments. The experimental results showed that the structures of microfluidic chips could be completely replicated. However, tensile deformation and fracture defects were observed at the edges of the micro-structures after demolding. Compared to the Ni mold insert, the calculation of the relative deviation percentages showed that the width of the micro-channel became larger and the depth became smaller, while the dimensions of the micro-mixing structure changes in the opposite direction. Subsequently, a molecular dynamics (MD) simulation model of polymer/nickel (Ni) mold insert for injection molding was established. The changes of adhesion work, demolding resistance and potential energy during demolding were analyzed. The simulation results showed that the polymer structures had some deformations such as necking, molecular chain stretching and voids under the action of adhesion work and demolding resistance. The difference in the contact area with the mold insert directly brought different interfacial interactions. In addition, the potential energy change of the polymer system could be used to quantitatively characterize the demolding deformation of the structure. Overall, the MD method is able to effectively explain the internal mechanisms of interfacial interactions, leading to the demolding deformation of polymer structures from the molecular/atomic scale.

Anti-Adhesive Organosilane Coating Comprising Visibility on Demand

There is a wide application field for anti-adhesive and hydrophobic coatings, stretching from self-cleaning surfaces over anti-graffiti and release coatings to demolding aids in the production of polymers. The typical materials for the latter are hard coatings, including TiN, CrN, diamond-like carbon, etc. Alternatively, organosilane coatings based on perfluorinated compounds or molecules with long alkyl side chains can be employed. Although these functional layers are generally required to be invisible, there is a demand for a straightforward approach, which enables the temporary control of successful and homogeneous application as well as abrasion and wear of the coatings during use. For this purpose, a visibility-on-demand property was introduced to an already established anti-adhesive organosilane coating by incorporation of 1,8-naphthalimide-N-propyltriethoxysilane (NIPTES) as a fluorescent marker molecule. While the naphthalimide unit provides blue fluorescence under UV irradiation, the ethoxy groups of NIPTES enable the covalent coupling to the coating as a result of the hydrolysis and condensation reactions. As a consequence, the fluorescent marker molecule NIPTES can simply be added to the coating solution as an additional organosilane component, without the need for changes in the approved deposition procedure. The generated fluorescent anti-adhesive coatings were characterized by contact angle measurements, atomic force microscopy (AFM), as well as by different spectroscopic techniques, including FTIR, UV-Vis, fluorescence and X-ray photoelectron spectroscopy (XPS). In addition, the on-demand control function provided by the introduced fluorescence properties was evaluated along an injection molding process.

Modification of Polydiallyldimethylammonium Chloride with Sodium Polystyrenesulfonate Dramatically Changes the Resistance of Polymer-Based Coatings towards Wash-Off from Both Hydrophilic and Hydrophobic Surfaces

Polymer coatings based on polycations represent a perspective class of protective antimicrobial coatings. Polydiallyldimethylammonium chloride (PDADMAC) and its water-soluble complexes with sodium polystyrenesulfonate (PSS) were studied by means of dynamic light-scattering, laser microelectrophoresis and turbidimetry. It was shown that addition of six mol.% of polyanion to polycation results in formation of interpolyelectrolyte complex (IPEC) that was stable towards phase separation in water-salt media with a concentration of salts (NaCl, CaCl₂, Na₂SO₄, MgSO₄) up to 0.5 M. Most of the polyelectrolyte coatings are made by layer-by-layer deposition. The utilization of water-soluble IPEC for the direct deposition on the surface was studied. The coatings from the PDADMAC and the PSS/PDADMAC complex were formed on the surfaces of hydrophilic glass and hydrophobic polyvinylchloride. It was found that formation IPEC allows one to increase the stability of the coating towards wash-off with water in comparison to individual PDADMAC coating on both types of substrates. The visualization of the coatings was performed by atomic force microscopy and scanning electron microscopy.

Gracia L, Amor JI, Borro M, Hernández-Gascón B. Demoulding process assessment of elastomers in micro-textured moulds

Background: Micro-texturing is an increasingly used technique that aims at improving the functional behaviour of components during their useful life, and it is applied in different industrial manufacturing processes for different purposes, such as reducing friction on dynamic rubber seals for pneumatic equipment, among others. Micro-texturing is produced on polymer components by transfer from the mould and might critically increase the adhesion and friction between the moulded rubber part with the mould, provoking issues during demoulding, both on the mould itself and on the rubber part. The mould design, the coating release agent applied to the mould surface, and the operational parameters of the moulding/demoulding process, are fundamental aspects to avoid problems and guarantee a correct texture transfer during the demoulding process. Methods: In this work, the lack of knowledge about demoulding processes was addressed with an in-house test rig and a robust experimental procedure to measure demoulding forces (DFs) as well as the final quality of the moulded part, between thermoset polymers and moulds. After the characterization of several Sol-Gel coating formulations (inorganic; hybrid) the influence of several parameters was analysed experimentally, i.e.: Sol-Gel efficiency, texture effects, pattern geometry, roughness and material compound. Results: The results obtained from the experimental studies revealed that texture depth is the most critical geometrical parameter, showing high scatter among the selected compounds. Finally, the experimental results were used to compute a model through reduced order modelling (ROM) technique for the prediction of DFs. Conclusions: The characterization of DFs in a laboratory, with a specific device operated by a universal testing machine (UTM), provided valuable information that allows a fast and optimized introduction of texturing in rubber components. Selection of a novel Sol-Gel coating and the use of the ROM technique contributed to speed up implementation for mass production.

Surface-Immobilized Photoinitiators for Light Induced Polymerization and Coupling Reactions

Straightforward and versatile surface modification, functionalization and coating have become a significant topic in material sciences. While physical modification suffers from severe drawbacks, such as insufficient stability, chemical induced grafting processes efficiently modify organic and inorganic materials and surfaces due to covalent linkage. These processes include the "grafting from" method, where polymer chains are directly grown from the surface in terms of a surface-initiated polymerization and the "grafting to" method where a preformed (macro)-molecule is introduced to a preliminary treated surface via a coupling reaction. Both methods require an initiating species that is immobilized at the surface and can be triggered either by heat or light, whereas light induced processes have recently received increasing interest. Therefore, a major challenge is the ongoing search for suitable anchor moieties that provide covalent linkage to the surface and include initiators for surface-initiated polymerization and coupling reactions, respectively. This review containing 205 references provides an overview on photoinitiators which are covalently coupled to different surfaces, and are utilized for subsequent photopolymerizations and photocoupling reactions. An emphasis is placed on the coupling strategies for different surfaces, including oxides, metals, and cellulosic materials, with a focus on surface coupled free radical photoinitiators (type I and type II). Furthermore, the concept of surface initiation mediated by photoiniferters (PIMP) is reviewed. Regarding controlled radical polymerization from surfaces, a large section of the paper reviews surface-tethered co-initiators, ATRP initiators, and RAFT agents. In combination with photoinitiators or photoredox catalysts, these compounds are employed for surface initiated photopolymerizations. Moreover, examples for coupled photoacids and photoacid generators are presented. Another large section of the article reviews photocoupling and photoclick techniques. Here, the focus is set on light sensitive groups, such as organic azides, tetrazoles and diazirines, which have proven useful in biochemistry, composite technology and many other fields.