PdII and PtII Complexes with Amphiphilic Ligands: Formation of Micelles and [5]Rotaxanes with α-Cyclodextrin in Aqueous Solution

Ferrocene-Containing Pseudorotaxanes in Crystals: Aromatic Interactions with Hammett Correlation

Single crystals of pseudorotaxanes, [(FcCH₂NH₂CH₂Ar)(DB24C8)][PF₆] (DB24C8 = dibenzo[24]crown-8, Fc = Fe(C₅H₄)(C₅H₅), Ar = -C₆H₃-3,4-Cl₂, -C₆H₃-3,4-F₂, -C₆H₄-4-F, -C₆H₄-4-Cl, -C₆H₄-4-Br, -C₆H₃-3-F-4-Me, -C₆H₄-4-I) and [(FcCH₂NH₂CH₂C₆H₄-4-Me)(DB24C8)][Ni(dmit)₂] (dmit = 1,3-dithiole-2,4,5-dithiolate), were obtained from solutions containing DB24C8 and ferrocenylmethyl(arylmethyl)ammonium. X-ray crystallographic analyses of the pseudorotaxanes revealed that the aryl ring of the axle moiety and the catechol ring of the macrocyclic component were at close centroid distances and parallel or tilted orientation. The structures with parallel aromatic rings showed correlation of the distances between the centroids to Hammett substituent constants of the aryl groups.

Metallosurfactants Consisting of Amphiphilic Ligands and Transition Metals: Structure, Bonding, Reactivity, and Self-assembling Property

Metallosurfactants are emerging as a relatively new class of surfactants whose ligand moieties bind to various transition metals. Because transition metal centers are incorporated into the surfactant frameworks, they can form various self-assembled structures with metallic interfaces such as micelles, vesicles, and lyotropic liquid crystals. To reduce the lability of transition metal complexes under aqueous conditions, various amphiphilic ligands have been developed as surfactant frameworks. This review discusses some aspects of the design and chemical structures of amphiphilic ligands, as well as focus on various functions and types of chemical bonds present in metallosurfactants.

Cyclodextrin Rotaxanes of Pt Complexes and Their Conversion to Pt Nanoparticles

The cationic Pt complex (Pt(NC₆H₄-C₆H₄N-(CH₂)₁₀-O(C₆H₃-3,5-(OMe)₂)(MeN-(CH₂CH₂NMe₂)₂))⁺ was prepared by the reaction of alkylbipyridinium ligand with a nitrateplatinum(II) complex. Mixing the complex and α- and β-cyclodextrins in aqueous media produced the corresponding [2]rotaxanes with 1:1 stoichiometry. γ-Cyclodextrin and the Pt complex formed a rotaxane having components in a 1:1 or 2:1 molar ratio. The results of mass and nuclear magnetic resonance (NMR) measurements confirmed the rotaxane structures of the Pt complexes. Transmission electron microscopy (TEM) and atomic force microscope (AFM) analyses revealed the formation of micelles or vesicles. The addition of NaBH₄ to the rotaxanes in aqueous media formed Pt nanoparticles with diameters of 1.3-2.8 nm, as characterized by TEM. The aggregated size of the nanoparticles formed from the rotaxane did not change even at 70 °C, and they showed higher thermal stability than those obtained from the reduction of the cyclodextrin-free Pt complex.

Exploring and Exploiting the Symmetry-Breaking Effect of Cyclodextrins in Mechanomolecules

Cyclodextrins (CDs) are cone-shaped molecular rings that have been widely employed in supramolecular/host–guest chemistry because of their low cost, high biocompatibility, stability, wide availability in multiple sizes, and their promiscuity for binding a range of molecular guests in water. Consequently, CD-based host–guest complexes are often employed as templates for the synthesis of mechanically bonded molecules (mechanomolecules) such as catenanes, rotaxanes, and polyrotaxanes in particular. The conical shape and cyclodirectionality of the CD “bead” gives rise to a symmetry-breaking effect when it is threaded onto a molecular “string”; even symmetrical guests are rendered asymmetric by the presence of an encircling CD host. This review focuses on the stereochemical implications of this symmetry-breaking effect in mechanomolecules, including orientational isomerism, mechanically planar chirality, and topological chirality, as well as how they support applications in regioselective and stereoselective chemical synthesis, the design of molecular machine prototypes, and the development of advanced materials.

Self-assembling Properties of an N-Heterocyclic Carbene-based Metallosurfactant: Pd-Coordination Induced Formation of Reactive Interfaces in Water

In this study, an N-heterocyclic carbene (NHC)-based metallosurfactant (MS), NHC-PdMS, was synthesized, where Pd(II) was bound to the NHC framework via a robust Pd-carbene bond with NEt₃ as a co-ligand. Surface tension measurements revealed that the critical micelle concentration (CMC) of NHC-PdMS (1.8×10^-4 M) was one order of magnitude lower than that of its MS precursor (imidazolium bromide). Coordination of the MS precursor and NEt₃ to Pd(II) also influenced micelle size; the hydrodynamic diameters of NHC-PdMS and the MS precursor were observed to be 25.8±5.6 nm and 2.5±0.3 nm, respectively. Furthermore, small angle X-ray scattering measurements indicated that NHC-PdMS exhibited liquid crystalline behavior above 26 wt%, with a spacing ratio of 1:2:3 for the first, second, and third Bragg peaks. To understand the role of the reactive interface, NHC-PdMS was also applied to aqueous catalytic reactions. Owing to its low CMC value, a catalytic amount of NHC-PdMS (3 mol%) provided the reactive interface, which facilitated the aqueous Mizoroki-Heck reaction of various aryl iodides and styrene in good yields (72-95%). These results suggest that MS formation results in a drastic change in selfassembling properties, which are important for the development of highly reactive chemical interfaces in water.

Luminescence of Amphiphilic PtII Complexes Controlled by Confinement

The formation of hybrid silica-based systems to study the effect of the confinement on the emission properties of self-assembled platinum(II) complexes is reported. The complexes behave as surfactants since they possess a hydrophobic moiety and, on the ancillary ligand, a relatively long hydrophilic chain terminated with a positively charged group. The compounds, soluble in water, self-assemble, even at very low concentration, in supramolecular structures which display an orange luminescence. The properties of the assemblies have been studied in detail and in order to stabilize these supramolecular architectures and to enhance their emission properties hybrid silica porous nanoparticles have been prepared. In particular the Pt^II complexes have been employed as co-surfactant for the template formation of mesoporous silica nanoparticles (MSNs) using a sol gel synthesis. Interestingly, upon encapsulation in the silica pores, the platinum aggregates exhibit an emission profile similar in energy to the complexes assembled in solution, but the photoluminescence quantum yields of the hybrid systems are significantly higher (up to 45 %), and the excited state lifetimes much longer than those recorded in solution. Such enhancement of the photophysical properties together with the possibility to process the hybrid silica nanomaterials can pave the way to new type of emitters.

Stoppering/unstoppering of a rotaxane formed between an N-hetorycle ligand containing surfactant: β-cyclodextrin pseudorotaxane and pentacyanoferrate(II) ions

The assembly of a surfactant-based rotaxane by adding the labile aquopentacyanoferrate(II) ion to the previously formed pseudorotaxane between the surfactant 11-(isonicotinoyloxy)-N,N,N-triethyl-1-undecanaminium bromide and β-cyclodextrin was investigated by ¹H NMR and kinetic measurements. NMR spectroscopy has showed that the rotaxane can be formed through two different mechanisms. The rotaxane can be unstoppered by using the pyridine ligand substitution reaction by the high-field cyanide ligand. In this work a new method is developed for the preparation of several new surfactant-based rotaxanes by changing the hydrophilic and hydrophobic regions of the surfactants and the nature of the macrocycle.

Cyclodextrin-based ordered rotaxane-monolayers at gold surfaces

Complexation-to-deaggregation effect of cyclodextrin was applied to achieve ordered functional monolayers on a gold surface.

Strategies and tactics for the metal-directed synthesis of rotaxanes, knots, catenanes, and higher order links

More than a quarter of a century after the first metal template synthesis of a [2]catenane in Strasbourg, there now exists a plethora of strategies available for the construction of mechanically bonded and entwined molecular level structures. Catenanes, rotaxanes, knots and Borromean rings have all been successfully accessed by methods in which metal ions play a pivotal role. Originally metal ions were used solely for their coordination chemistry; acting either to gather and position the building blocks such that subsequent reactions generated the interlocked products or by being an integral part of the rings or "stoppers" of the interlocked assembly. Recently the role of the metal has evolved to encompass catalysis: the metal ions not only organize the building blocks in an entwined or threaded arrangement but also actively promote the reaction that covalently captures the interlocked structure. This Review outlines the diverse strategies that currently exist for forming mechanically bonded molecular structures with metal ions and details the tactics that the chemist can utilize for creating cross-over points, maximizing the yield of interlocked over non-interlocked products, and the reactions-of-choice for the covalent capture of threaded and entwined intermediates.

En route to a molecular sheaf: active metal template synthesis of a [3]rotaxane with two axles threaded through one ring

We report that a 2,2':6',2″-terpyridylmacrocycle-Ni complex can efficiently mediate the threading of two alkyl chains with bulky end groups in an active metal template sp(3)-carbon-to-sp(3)-carbon homocoupling reaction, resulting in a rare example of a doubly threaded [3]rotaxane in up to 51% yield. The unusual architecture is confirmed by X-ray crystallography (the first time that a one-ring-two-thread [3]rotaxane has been characterized in the solid state) and is found to be stable with respect to dethreading despite the large ring size of the macrocycle. Through such active template reactions, in principle, a macrocycle should be able to assemble as many axles in its cavity as the size of the ring and the stoppers will allow. A general method for threading multiple axles through a macrocycle adds significantly to the tools available for the synthesis of different types of rotaxane architectures.