Highly Sensitive Detection of T790 M with a Three-Level Characteristic Current by Thymine-Hg(II)-Thymine in the α-Hemolysin Nanopore

Sensitive detection of resistance mutation T790 M is of great significance for early diagnosis and prognostic monitoring of non-small-cell lung cancer (NSCLC). In this paper, we showed a highly sensitive detection strategy for T790 M using a three-level characteristic current signal pattern in an α-hemolysin nanopore. A probe was designed that formed a C-T mismatched base pair with wild-type/P and a T-T mismatched with the T790M/P. The T790M/P produced a unique three-level characteristic current signal in the presence of mercury ions(II): first, T790M-Hg2+-P entering the vestibule of α-HL under the transmembrane potential and overhang of probe occupying the β-barrel, then probe unzipping from the T790M/P, T790 M temporally residing inside the nanocavity due to the interaction with Hg(II), and finally T790 M passing through the β-barrel. The blocking current distribution was concentrated with a small relative standard deviation of about 3%, and the signal peaks of T790 M and wild-type can be completely separated with a high separation resolution of more than 2.5, which achieved the highly sensitive detection of T790 M down to 0.001 pM (confidence level P 95%) with a linear range from 0.001 pM to 1 nM in human serum samples. This highly sensitive recognition strategy enables the detection of low abundance T790 M and provides a method for prognostic monitoring in NSCLC patients.

Nanopore Sensing Technique for Studying the Hofmeister Effect

The nanopore sensing technique is an emerging method of detecting single molecules, and extensive research has gone into various fields, including nanopore sequencing and other applications of single-molecule studies. Recently, several researchers have explored the specific ion effects in nanopore channels, enabling a unique understanding of the Hofmeister effect at the single-molecule level. Herein, the recent advances of using nanopore sensing techniques are reviewed to study the Hofmeister effect and the physicochemical mechanism of this process is attempted. The challenges and goals are also discussed for the future in this field.

Biological Nanopores: Confined Spaces for Electrochemical Single-Molecule Analysis

Nanopore sensing is developing into a powerful single-molecule approach to investigate the features of biomolecules that are not accessible by studying ensemble systems. When a target molecule is transported through a nanopore, the ions occupying the pore are excluded, resulting in an electrical signal from the intermittent ionic blockade event. By statistical analysis of the amplitudes, duration, frequencies, and shapes of the blockade events, many properties of the target molecule can be obtained in real time at the single-molecule level, including its size, conformation, structure, charge, geometry, and interactions with other molecules. With the development of the use of α-hemolysin to characterize individual polynucleotides, nanopore technology has attracted a wide range of research interest in the fields of biology, physics, chemistry, and nanoscience. As a powerful single-molecule analytical method, nanopore technology has been applied for the detection of various biomolecules, including oligonucleotides, peptides, oligosaccharides, organic molecules, and disease-related proteins. In this Account, we highlight recent developments of biological nanopores in DNA-based sensing and in studying the conformational structures of DNA and RNA. Furthermore, we introduce the application of biological nanopores to investigate the conformations of peptides affected by charge, length, and dipole moment and to study disease-related proteins' structures and aggregation transitions influenced by an inhibitor, a promoter, or an applied voltage. To improve the sensing ability of biological nanopores and further extend their application to a wider range of molecular sensing, we focus on exploring novel biological nanopores, such as aerolysin and Stable Protein 1. Aerolysin exhibits an especially high sensitivity for the detection of single oligonucleotides both in current separation and duration. Finally, to facilitate the use of nanopore measurements and statistical analysis, we develop an integrated current measurement system and an accurate data processing method for nanopore sensing. The unique geometric structure of a biological nanopore offers a distinct advantage as a nanosensor for single-molecule sensing. The construction of the pore entrance is responsible for capturing the target molecule, while the lumen region determines the translocation process of the single molecule. Since the capture of the target molecule is predominantly diffusion-limited, it is expected that the capture ability of the nanopore toward the target analyte could be effectively enhanced by site-directed mutations of key amino acids with desirable groups. Additionally, changing the side chains inside the wall of the biological nanopore could optimize the geometry of the pore and realize an optimal interaction between the single-molecule interface and the analyte. These improvements would allow for high spatial and current resolution of nanopore sensors, which would ensure the possibility of dynamic study of single biomolecules, including their metastable conformations, charge distributions, and interactions. In the future, data analysis with powerful algorithms will make it possible to automatically and statistically extract detailed information while an analyte translocates through the pore. We conclude that these improvements could have tremendous potential applications for nanopore sensing in the near future.

Stochastic Detection of MPSA-Gold Nanoparticles Using a α-Hemolysin Nanopore Equipped with a Noncovalent Molecular Adaptor

We present the first study of a novel, more sensitive method for the characterization of nanoparticles (NPs). This approach combines detection via a protein nanopore with modification of its interaction behavior using a molecular adaptor. We identify different populations of 3-mercapto-1-propanesulfonate (MPSA)-modified-gold NPs using the biological nanopores α-hemolysin (αHL) and its M113N mutant equipped with a noncovalently bound γ-cyclodextrin molecule as a stochastic sensor. Identification takes place on the basis of the extent of current blockades and residence times. Here, we demonstrate that noncovalently attached adaptors can be used to change the sensing properties of αHL nanopores, allowing the detection and characterization of different populations of MPSA NPs. This is an advance in sensitivity and diversity of NP sensing, as well as a promising and reliable technology to characterize NPs by using protein nanopores.

Single molecule analysis by biological nanopore sensors

Nanopore sensors provide a highly innovative technique for a rapid and label-free single molecule analysis, which holds a great potential in routing applications. Biological nanopores have been used as ultra-sensitive sensors over a wide range of single molecule analysis including DNA sequencing, disease diagnosis, drug screening, environment monitoring and the construction of molecule machines. This mini review will focus on the current strategies for the identification and characterization of an individual analyte, especially based on our recent achievements in biological nanopore biosensors.

Sensing single mixed-monolayer protected gold nanoparticles by the α-hemolysin nanopore

Gold nanoparticles are widely used in various applications in fields including chemistry, engineering, biology, medicine, and electronics. These materials can be synthesized and modified with ligands containing different functional groups. Among nanoparticles' characteristics, chemical surface composition is likely to be a crucial feature, demanding robust analytical methodologies for its assessment. Single molecule analysis using the biological nanopores α-hemolysin and its E111A mutant is presented here as a promising methodology to stochastically sense organic monolayer protected gold-nanoparticles with different ligand shell compositions. By monitoring the ionic current across a single protein nanopore, differences in the physical and chemical characteristics (e.g., size, ligand shell composition, and arrangement) of individual nanoparticles can be distinguished based on the differences in the current blockade events that they cause. Such differences are observed in the spread of both the amplitude and duration of current blockades. These values cannot be correlated with a single physical characteristic. Instead the spread represents a measure of heterogeneity within the nanoparticle population. While our results compare favorably with the more traditional analytical methodologies, further work will be required to improve the accuracy of identification of the NPs and understand the spread of values within a nanoparticle preparation as well as the overlap between similar preparations.

Analysis of a single α-synuclein fibrillation by the interaction with a protein nanopore

The formation of an α-synuclein fibril is critical in the pathogenesis of Parkinson's disease. The native unfolded α-synuclein monomer will translocate through an α-hemolysin nanopore by applied potential at physiological conditions in vitro. Applying a potential transformed α-synuclein into a partially folded intermediate, which was monitored by capture inside the vestibule of an α-hemolysin nanopore with a capture current of 20 ± 1.0 pA. The procedure involves the critical early stage of α-synuclein structural transformation. Further elongation of the intermediate produces a block current to 5 ± 0.5 pA. It is revealed that the early stage fibril of α-synuclein inside the nanopore is affected by intrapeptide electrostatic interaction. In addition, trehalose cleared the fibrillation by changing the surface hydrophobic interaction of A53T α-synuclein, which did not show any inhibition effect from WT α-synuclein. The results proved that the interpeptide hydrophobic interactions in the elongation of A53T α-synuclein protofilaments can be greatly weakened by trehalose. This suggests that trehalose inhibits the interpeptide interaction involved in protein secondary structure. The hydrophobic and electrostatic interactions are associated with an increase in α-synuclein fibrillation propensity. This work provides unique insights into the earliest steps of the α-synuclein aggregation pathway and provides the potential basis for the development of drugs that can prevent α-synuclein aggregation at the initial stage.

Microfluidic strategies applied to biomarker discovery and validation for multivariate diagnostics

Complex diseases are caused by combinatorial genetic, environmental and lifestyle factors. The emergence of multibiomarker tests to define these diseases and to identify the early, presymptomatic stages offers several advantages to the conventional use of single marker tests. The development of multibiomarker protein-based tests remains constrained by technological and operational limitations in assaying hundreds to thousands of proteins in thousands of samples. In order to develop a multibiomarker test that stratifies risk for Type 2 diabetes, we took a candidate-driven immunoassay approach utilizing a microfluidics platform to analyze 89 candidate proteins in thousands of samples, which allowed us to move from discovery to a commercial test in 2 years. Future multibiomarker test development will be enhanced by advancements in the number of proteins that can be analyzed, analytical sensitivity and throughput, and sample volume requirements, all of which depend on the further advancement of microfluidics, detection technologies and affinity-based reagents.

Enhanced translocation of poly(dt)45 through an α-hemolysin nanopore by binding with antibody

The translocation time of poly(dT)(45) through an α-hemolysin pore was reduced in the presence of a DNA-binding Fab fragment. The Fab acts as a rudder to steer the DNA into the pore.