Recent Progress on Nitrogen-Rich Energetic Materials Based on Tetrazole Skeleton

Development of nitrogen-rich energetic materials has gained much attention because of their remarkable properties including large nitrogen content and energy density, good thermal stability, low sensitivity, good energetic performance, environmental friendliness and so on. Tetrazole has the highest nitrogen and highest energy contents among the stable azoles. The incorporation of diverse explosophoric groups or substituents into the tetrazole skeleton is beneficial to obtain high-nitrogen energetic materials having excellent energetic performance and suitable sensitivity. In this review, the development of high-nitrogen energetic materials based on tetrazole skeleton is highlighted. Initially, the property and utilization of nitrogen-rich energetic materials are presented. After showing the advantage of the tetrazole skeleton, the high-nitrogen energetic materials based on tetrazole are classified and introduced in detail. Based on different types of energetic materials (EMs), the synthesis and properties of nitrogen-rich energetic materials based on mono-, di-, tri- and tetra-tetrazole are summarized in detail.

Unraveling the Effect of MgAl/CuO Nanothermite on the Characteristics and Thermo-Catalytic Decomposition of Nanoenergetic Formulation Based on Nanostructured Nitrocellulose and Hydrazinium Nitro-Triazolone

The present study aims to develop new energetic composites containing nanostructured nitrocellulose (NNC) or nitrated cellulose (NC), hydrazinium nitro triazolone (HNTO), and MgAl-CuO nanothermite. The prepared energetic formulations (NC/HNTO/MgAl-CuO and NNC/HNTO/MgAl-CuO) were analyzed using various analytical techniques, such as Fourier-transform infrared (FTIR), scanning electron microscopy (SEM), thermogravimetry (TGA), and differential scanning calorimetry (DSC). The outstanding catalytic impact of MgAl-CuO on the thermal behavior of the developed energetic composites was elucidated by kinetic modeling, applied to the DSC data using isoconversional kinetic methods, for which a considerable drop in the activation energy was acquired for the prepared formulations, highlighting the catalytic influence of the introduced MgAl-CuO nanothermite. Overall, the obtained findings demonstrated that the newly elaborated NC/HNTO/MgAl-CuO and NNC/HNTO/MgAl-CuO composites could serve as promising candidates for application in the next generation of composite explosives and high-performance propellants.

Design, synthesis and investigations of a series of energetic salts through the variation of amines and concentration of picrate anions

Eight energetic salts combining N-bases with picrate ion were synthesized in high yields. The structures and energetic properties were regulated by the variation of N-base molecules and the concentration of the picric acid in the reaction mixture.

Design of Energetic Materials Based on Asymmetric Oxadiazole

A new family of asymmetric oxadiazole based energetic compounds were designed. Their electronic structures, heats of formation, detonation properties and stabilities were investigated by density functional theory. The results show that all the designed compounds have high positive heats of formation ranging from 115.4 to 2122.2 kJ mol-1. -N- bridge/-N3 groups played an important role in improving heats of formation while -O- bridge/-NF2 group made more contributions to the densities of the designed compounds. Detonation properties show that some compounds have equal or higher detonation velocities than RDX, while some other have higher detonation pressures than RDX. All the designed compounds have better impact sensitivities than those of RDX and HMX and meet the criterion of thermal stability. Finally, some of the compounds were screened as the candidates of high energy density compounds with superior detonation properties and stabilities to that of HMX and their electronic properties were investigated.

A comparative study of thermal stability of TNT, RDX, CL20 and ANTA explosives using UV 266 nm-time resolved photoacoustic pyrolysis technique

The paper reports the potential use of UV based pulsed photoacoustic spectroscopy to study the thermal stability of some well-known premier explosives such as TNT, RDX, CL20, and ANTA between 30 and 350 °C range. The thermal PA spectra of samples were recorded using fourth harmonic wavelength i.e. 266 nm of pulse duration 7 ns and repetition rate 10 Hz obtained from Q-switched Nd: YAG laser system. Under the influence of UV radiation, the explosive molecules in vapor phase follow the photodissociation process and converted into their byproducts such as NO, NO₂ and N₂O etc. due to π* ← n transitions, which are responsible for the generation resultant PA signal at 266 nm wavelength. The results obtained from PA spectra as a function of temperature are cross verified with Thermo gravimetric-differential thermal analysis (TG-DTA) to ascertain the thermal stability of these samples. The comparative PA spectra of samples were analyzed and shown the behavior of acoustic modes with respect to incident laser energy, and data acquisition time. Finally, the thermal quality factor "Q" is measured to test the stability of reported explosives.

Unprecedented synthesis of 1,2,3-triazolo-cinnolinone via Sonogashira coupling and intramolecular cyclization

An unprecedented copper mediated one-pot sequential synthesis of 1,2,3-triazolo cinnolinone derivatives from 2-halo-phenyl triazoles and terminal alkynes has been reported.

Comparative Study of Ultraviolet Laser-Based Time-Resolved Photoacoustic Fingerprint Spectra and Thermal Decomposition Mechanisms of Energetic 1,2,3-1H-Triazole Derivatives Under Controlled Pyrolysis

We report the comparative study of photoacoustic (PA) fingerprint spectra, thermal decomposition, and stability mechanism of some phenyl and bis series energetic compounds named 1-(2-methoxy,-3,5-dinitrophenyl)-1H-1,2,3-triazole ( S₅), 1-(3-methoxy, 2, 6 dinitrophenyl) 1H-1, 2, 3 triazole ( S₁₀), 1-(4-nitrophenyl)-1H-1,2,3-triazole ( S₈), and 2,6-bis ((4-(nitromethyl)-1H-1,2,3-triazol-1-yl)methyl) pyridine ( S₉). Fourth harmonic wavelength, i.e., 266 nm of pulse duration 7 ns and 10 Hz repetition rate obtained from Q-switched Nd: YAG laser, was used to record the thermal PA spectra of these compounds under controlled pyrolysis condition in the range of 30-350 ℃. The PA fingerprint spectra are produced due to entire molecule vapor along with principal functional byproduct NO₂ molecule. NO₂ molecule is a major gas released during thermal decomposition due to weakest nature of C-NO₂ bond. Further, NO₂ molecules are involved in photodissociation process due to π*← n transition and converted into NO molecules inside the PA cell due to excitation by 266 nm wavelength. The combined results of PA and gas chromatography-mass spectrometry (GC-MS) spectra along with thermo gravimetric-differential thermal analysis (TG-DTA) data confirm the thermal decomposition mechanism process that can be completed in multiple steps. In addition, GC-MS spectra also confirm the release of NO and NO₂ molecules. The effect of incident laser energy and data acquisition time has been carried out for understanding the behavior of acoustic modes. Finally, the thermal quality factor "Q" is measured to test the stability of compounds.

Absolute ion hydration enthalpies and the role of volume within hydration thermodynamics

This paper reports that various thermodynamic properties in aqueous media for certain individual ions and for compounds are linear functions of the inverse cube root of the solid respective ionic and compound solid state volumes, V_m^−1/3.

Structures and properties of energetic cations in energetic salts

Energetic cations play important roles in energetic performance, which may attribute to the diverse backbones and substituted groups of energetic cations. This review emphasizes the roles of backbones and substituted groups in the energetic performance of energetic salts.

Palladium catalyzed domino reaction of 1,4-disubstituted 1,2,3-triazoles via double C–H functionalization: one-pot synthesis of triazolo[1,5-f]phenanthridines

A palladium catalyzed domino reaction of 1,4-disubstituted triazoles involving homo- and heterocondensation is presented. The approach provides a simple, straight forward and a facile route to access triazolo[1,5-f]phenanthridines in high yields.

Predictive thermodynamics for ionic solids and liquids

Thermodynamic properties of ionic solids and liquids may reliably be predicted using volume-based thermodynamics (VBT) and thermodynamic difference rules (TDR).

Nitrogen-rich energetic salts of 1H,1′H-5,5′-bistetrazole-1,1′-diolate: synthesis, characterization, and thermal behaviors

A series of nitrogen-rich heterocyclic 1H,1′H-5,5′-bistetrazole-1,1′-diolate salts with excellent thermal stabilities, impact sensitivities and promising detonation performances was synthesized.

Energetic salts prepared from phenolate derivatives

Energetic salts with 1 : 1, 2 : 1, and 3 : 1 charge ratios (cation : anion) based on various nitrogen-rich cations and phenolate anions have been synthesized by a straightforward and simple method.