Photodeformable Azo Polymer Janus Particles Obtained upon Nonsolvent-Induced Phase Separation and Asynchronous Aggregation

Photodeformable submicron Janus particles (JPs), containing an epoxy-based azo polymer (BP-AZ-CN) and poly(methyl methacrylate) (PMMA), were fabricated upon nonsolvent-induced phase separation. The formation of the JPs was induced by gradually adding deionized water into a tetrahydrofuran (THF) solution of both polymers. The results show that the two polymers start to precipitate from the solution at almost the same water content and immediately separate into two phases in each particle due to the strong incompatibility between the two components. After the nucleation, the sizes of the aggregates increase with increasing water content in the following growth stage. The amount of BP-AZ-CN molecules assembling into the aggregates is controlled by the water content in the medium, while the aggregation of PMMA molecules is a slow diffusion-controlled process due to the much higher molecular weight of this polymer. With a further increase in the water content in the dispersion medium, the swollen aggregates collapse to form JPs. Interestingly, when a dispersion with a water content of 50 vol % is diluted with a THF/H₂O mixture with the same water content, the shapes of the JPs are significantly modified and vitrified after removal of THF through evaporation. By increasing the dilution multiples adopted to dilute the intermediate dispersions, JPs with more asymmetric shapes are obtained due to the enhanced asynchronous aggregation. Ternary phase diagrams calculated according to the Flory-Huggins theory provide a semi-quantitative description and rationalization of the phase separation behavior related to the thermodynamic factors. The differences in the transport behavior and aggregation dynamics of the two polymers are also proven to be critical for the formation of the asymmetric structures. Upon irradiation, the BP-AZ-CN compartments of JPs exhibit remarkable elongation along the electric vibrational direction of a linearly polarized laser beam at a wavelength of 488 nm.

Mussel-like Surface Adhesion and Photoinduced Cooperative Deformation of Janus Particles

This study focused on mussel-like surface adhesion and photoinduced cooperative deformation of a unique type of Janus particles (JPs), composed of an isosorbide-based molecular glass bearing push-pull type azo chromophore (IAC-4) and a 2,6-pyridinedicarboxamide-containing poly(dimethylsiloxane) oligomer (H₂pdca-PDMS). The JPs were obtained by the solvent evaporation method in an aqueous medium with the dispersed phase of a solution of IAC-4 and H₂pdca-PDMS in dichloromethane (DCM). The JP formation and its mechanism were investigated by electron microscopy, in situ optical microscopy, and theoretical analysis. The results showed that the Janus structures form through gradual segregation between the two components in the droplets induced by the evaporation of DCM, which follows the ternary phase diagrams calculated according to Flory-Huggins theory. In the following stage, the gradual coalescence of small domains in droplets is controlled by dynamic factors. After being deposited on a substrate, the JPs exhibit unidirectional adhesion with the H₂pdca-PDMS parts spreading on the substrate, while the IAC-4 parts orientate away from the substrate. The mussel-like adhesion is caused by the interfacial interaction of H₂pdca-PDMS with the hard surfaces (i.e., glass and silicon substrates) and its strong ability to spread and wet the surfaces to increase the contact area with the surfaces. Upon irradiation with linearly and circularly polarized laser beams at 488 nm, respectively, a series of unique surface morphologies are observed because of the photoinduced deformation of the IAC-4 parts along the electric vibration direction of the polarized light and the cooperative deformation of the H₂pdca-PDMS parts of the JPs. The cooperative deformation reveals the strong interfacial interaction and cohesiveness between the IAC-4 and the H₂pdca-PDMS phases in JPs. No peeling-off from the substrate is observed after the large-scale deformation, which also indicates the strong adhesion of the JPs on the substrate surfaces. This study not only demonstrates the mussel-like adhesion and unique cooperative deformation behavior but also supplies new insights into the interfacial interaction in JPs as well as that with hard surfaces, thus opening a new avenue for surface modification and functionalization.

Multifunctional Janus Particles Composed of Azo Polymer and Pyrene-Containing Polymer

This study investigated Janus particles (JPs) composed of an azo polymer and a pyrene-containing polymer, focusing on preparation, formation mechanism, photoinduced deformation behavior, and fluorescent properties as well as tunable colors of the dispersions. A methacrylate-based copolymer containing pyrenyl groups (P(MMA-co-PyMA)) and two azo polymers, i.e., a methacrylate-based polymer (PCNAZO) and an epoxy-based polymer (CH-TZ-NT) both bearing push-pull-type azo chromophores, were synthesized for this purpose. Two types of Janus particles, P(MMA-co-PyMA)/PCNAZO JPs and P(MMA-co-PyMA)/CH-TZ-NT JPs, were fabricated through microphase separation of the components in the droplets dispersed in aqueous media, induced by the evaporation of the organic solvent. The process of JP formation was thoroughly investigated by exploiting the function of pyrene moieties as a molecular probe through measuring the fluorescence emission spectra at different times during the structure evolution. The photoluminescent (PL) intensity, excimer emission, and vibrational fine structure of the fluorescence spectra were observed to give information about phase separation and solidification occurred in the dispersed droplets. The observations were rationalized by analysis with ternary phase diagrams calculated on the basis of the Flory-Huggins theory. Upon irradiation with a linearly polarized laser beam at 488 nm, the azo polymer parts in the P(MMA-co-PyMA)/PCNAZO JPs were observed to be elongated along the electric vibration direction of the polarized light and transformed into particles with unique morphologies. The dispersions of JPs with different compositions of the two types of the polymers showed highly tunable color changes originating from both fluorescence of the pyrenyl fluorophores and light absorption of the azo chromophores.

Design of Collective Motions from Synthetic Molecular Switches, Rotors, and Motors

Precise control over molecular movement is of fundamental and practical importance in physics, biology, and chemistry. At nanoscale, the peculiar functioning principles and the synthesis of individual molecular actuators and machines has been the subject of intense investigations and debates over the past 60 years. In this review, we focus on the design of collective motions that are achieved by integrating, in space and time, several or many of these individual mechanical units together. In particular, we provide an in-depth look at the intermolecular couplings used to physically connect a number of artificial mechanically active molecular units such as photochromic molecular switches, nanomachines based on mechanical bonds, molecular rotors, and light-powered rotary motors. We highlight the various functioning principles that can lead to their collective motion at various length scales. We also emphasize how their synchronized, or desynchronized, mechanical behavior can lead to emerging functional properties and to their implementation into new active devices and materials.

Light-Triggered Reversible Self-Engulfing of Janus Nanoparticles

Block copolymers containing azobenzene liquid crystalline (LC) mesogen are used to prepare snowman-like Janus nanoparticles (NPs) by emulsion solvent evaporation. The azobenzene-containing poly(methacrylate) (PMAAz) head of the Janus NPs is in the smectic LC phase with ordered stripes, which becomes amorphous and enlarged due to trans/cis transformation under UV irradiation. The expanded PMAAz can consequently engulf the other head. The self-engulfed NPs can recover to their original state in both shape and LC state via visible-light irradiation. This strategy is promising for programmable load and release of different payloads by remote trigger using light.