Microporous Crystalline γ-Al2O3Replicated from Microporous Covalent Triazine Framework and Its Application as Support for Catalytic Hydrolysis of Ammonia Borane

Reducible tungsten(VI) oxide-supported ruthenium(0) nanoparticles: highly active catalyst for hydrolytic dehydrogenation of ammonia borane

Reducible WO3 powder with a mean diameter of 100 nm is used as support to stabilize ruthenium(0) nanoparticles. Ruthenium(0) nanoparticles are obtained by NaBH4 reduction of ruthenium(III) precursor on the surface of WO3 support at room temperature. Ruthenium(0) nanoparticles are uniformly dispersed on the surface of tungsten(VI) oxide. The obtained Ru0/WO3 nanoparticles are found to be active catalysts in hydrolytic dehydrogenation of ammonia borane. The turnover frequency (TOF) values of the Ru0/WO3 nanocatalysts with the metal loading of 1.0%, 2.0%, and 3.0% wt. Ru are 122, 106, and 83 min-1, respectively, in releasing hydrogen gas from the hydrolysis of ammonia borane at 25.0 °C. As the Ru0/WO3 (1.0% wt. Ru) nanocatalyst with an average particle size of 2.6 nm provides the highest activity among them, it is extensively investigated. Although the Ru0/WO3 (1.0% wt. Ru) nanocatalyst is not magnetically separable, it has extremely high reusability in the hydrolysis reaction as it preserves 100% of initial catalytic activity even after the 5th run of hydrolysis. The high activity and reusability of Ru0/WO3 (1.0% wt. Ru) nanocatalyst are attributed to the favorable metal-support interaction between the ruthenium(0) nanoparticles and the reducible tungsten(VI) oxide. The high catalytic activity and high stability of Ru0/WO3 nanoparticles increase the catalytic efficiency of precious ruthenium in hydrolytic dehydrogenation of ammonia borane.

The Fabrication of Pd Single Atoms/Clusters on COF Layers as Co-catalysts for Photocatalytic H2 Evolution

The particle size of co-catalysts significantly affects the activity of semiconductors in photocatalysis. Herein, we report that the photocatalytic H₂ evolution (PHE) activity of a visible light responsive covalent organic framework (COF) layer supported on SiO₂ nanoparticles was greatly promoted from 47.7 to 85.5 μmol/h by decreasing the particle size of the Pd co-catalyst from 3.3 nm to single atoms/clusters. A PHE rate of 156 mmol g_COF^-1 h^-1 and apparent quantum efficiency up to 7.3% were achieved with the Pd SAs/Cs co-catalyst. The relationship between the activity of Pd in H₂ dissociation, proton reduction, and PHE rate suggests that the promotion effect of Pd SAs/Cs is mainly attributed to their enhancement in charge separation of COF layers rather than proton reduction. Furthermore, a photoactive film was fabricated and steady production of H₂ was achieved under visible light irradiation and static conditions. The optimization of the particle size of co-catalysts provides an efficient method for enhancing the photocatalytic activity of semiconductors.

Hydrolytic Dehydrogenation of Ammonia Borane Attained by Ru-Based Catalysts: An Auspicious Option to Produce Hydrogen from a Solid Hydrogen Carrier Molecule

Chemical hydrogen storage stands as a promising option to conventional storage methods. There are numerous hydrogen carrier molecules that afford satisfactory hydrogen capacity. Among them, ammonia borane has attracted great interest due to its high hydrogen capacity. Great efforts have been devoted to design and develop suitable catalysts to boost the production of hydrogen from ammonia borane, which is preferably attained by Ru catalysts. The present review summarizes some of the recent Ru-based heterogeneous catalysts applied in the hydrolytic dehydrogenation of ammonia borane, paying particular attention to those supported on carbon materials and oxides.

Nanopore-Supported Metal Nanocatalysts for Efficient Hydrogen Generation from Liquid-Phase Chemical Hydrogen Storage Materials

Hydrogen has emerged as an environmentally attractive fuel and a promising energy carrier for future applications to meet the ever-increasing energy challenges. The safe and efficient storage and release of hydrogen remain a bottleneck for realizing the upcoming hydrogen economy. Hydrogen storage based on liquid-phase chemical hydrogen storage materials is one of the most promising hydrogen storage techniques, which offers considerable potential for large-scale practical applications for its excellent safety, great convenience, and high efficiency. Recently, nanopore-supported metal nanocatalysts have stood out remarkably in boosting the field of liquid-phase chemical hydrogen storage. Herein, the latest research progress in catalytic hydrogen production is summarized, from liquid-phase chemical hydrogen storage materials, such as formic acid, ammonia borane, hydrous hydrazine, and sodium borohydride, by using metal nanocatalysts confined within diverse nanoporous materials, such as metal-organic frameworks, porous carbons, zeolites, mesoporous silica, and porous organic polymers. The state-of-the-art synthetic strategies and advanced characterizations for these nanocatalysts, as well as their catalytic performances in hydrogen generation, are presented. The limitation of each hydrogen storage system and future challenges and opportunities on this subject are also discussed. References in related fields are provided, and more developments and applications to achieve hydrogen energy will be inspired.

Defect-Rich Co-CoOx -Graphene Nanocatalysts for Efficient Hydrogen Production from Ammonia Borane

Chemical hydrogen storage ammonia borane has attracted extensive attention as a method of efficient utilization of hydrogen energy. The high-efficiency catalysts are the main factor restricting the hydrogen production of ammonia borane. In this paper, the synergistic effect of Co and CoO_x supported on graphene (named Co-CoO_x @GO-II) promotes the efficient hydrogen production of ammonia borane, and its catalytic hydrogen production rate can reach 5813 mL min^-1  g_Co ^-1 at 298 K, the corresponding TOF is 15.33 min^-1 . After five stability tests, Co-CoO_x @GO-II maintained 65% of its original catalytic performance. The synergy of metal and metal oxide and the defects in the atomic arrangement ensure the catalytic activity, the large specific surface area of graphene ensures the dispersion and fixation. This strategy may provide a possibility to design high-performance transition metal catalysts.