Defect-Free Mixed-Matrix Membranes with Hydrophilic Metal-Organic Polyhedra for Efficient Carbon Dioxide Separation

Synthesis of highly soluble zirconium organic cages by iodine substitution toward a CO2/N2 separation membrane

Metal organic cages (MOCs) show promise as fillers in mixed-matrix membranes (MMMs) for gas separation; highly soluble MOCs are desirable for fabrication of high-compatibility membranes. Herein, we report an iodine substitution strategy to substantially increase the MOC solubility. The synthesized MOC of ZrT-NH2-I possesses over 10-fold higher solubility than the parent ZrT-NH2 in organic solvents whilst retaining the original molecular structure and permanent porosity. Such enhanced solubility allows for the effective integration of ZrT-NH2-I with an amidoxime polymer of intrinsic microporosity (PIM-PAO), resulting in a compatible MMM with a uniform distribution of MOC. The ZrT-NH2-I@PIM-PAO MMM demonstrates a CO2 permeability of 1377 barrer and a CO2/N2 gas selectivity of 45 which is 45 times that of the membrane made from ZrT-NH2. The permeability-selectivity performance not only surpasses the 2008 upper bound, but also exceeds those of currently available MMMs.

Low-Loading Mixed Matrix Materials: Fractal-Like Structure and Peculiarly Enhanced Gas Permeability

Mixed matrix materials (MMMs) containing metal-organic framework (MOF) nanoparticles are attractive for membrane carbon capture. Particularly, adding <5 mass % MOFs in polymers dramatically increased gas permeability, far surpassing the Maxwell model's prediction. However, no sound mechanisms have been offered to explain this unusual low-loading phenomenon. Herein, we design an ideal series of MMMs containing polyethers (one of the leading polymers for CO2/N2 separation) and discrete metal-organic polyhedra (MOPs) with cage sizes of 2-5 nm. Adding 3 mass % MOP-3 in a polyether increases the CO2 permeability by 100% from 510 to 1000 Barrer at 35 °C because of the increased gas diffusivity. No discernible changes in typical physical properties governing gas transport properties are detected, such as glass transition temperature, fractional free volume, d-spacing, etc. We hypothesize that this behavior is attributed to fractal-like networks formed by highly porous MOPs, and for the first time, we validate this hypothesis using small-angle X-ray scattering analysis.

Dynamic Cages-Towards Nanostructured Smart Materials

The interest in capsular assemblies such as dynamic organic and coordination cages has blossomed over the last decade. Given their chemical and structural variability, these systems have found applications in diverse fields of research, including energy conversion and storage, catalysis, separation, molecular recognition, and live-cell imaging. In the exploration of the potential of these discrete architectures, they are increasingly being employed in the formation of more complex systems and smart materials. This Review highlights the most promising pathways to overcome common drawbacks of cage systems (stability, recovery) and discusses the most promising strategies for their hybridization with systems featuring various dimensionalities. Following the description of the most recent advances in the fabrication of zero to three-dimensional cage-based systems, this Review will provide the reader with the structure-dependent relationship between the employed cages and the properties of the materials.

Strategies for the Construction of Functional Materials Utilizing Presynthesized Metal-Organic Cages (MOCs)

Metal-organic cages (MOCs) that assemble from metal ions or metal clusters and organic ligands have attracted the interest of the scientific community because of their various functional coordination cavities. Unlike metal-organic frameworks (MOFs) with infinite frameworks, MOCs have discrete structures, making them soluble and stable in certain solvents and facilitating their application as starting reagents in the further construction of single components or composite materials. In recent years, increasing progress has been made in this field. In this review, we introduce these works from the perspective of design strategies, and focus on how presynthesized MOCs can be used to construct functional materials. Finally, we discuss the challenges and development prospects in this field.

Assembling metal-organic cages as porous materials

There is growing interest in metal-organic cages (MOCs) as porous materials owing to their processability in solution. The discrete molecular character and surface features of MOCs have a direct impact on the interactions between cages, enabling the final physical state of the materials to be tuned. In this tutorial review, we discuss how to use MOCs as core building units, highlighting the role played by surface functionalisation of MOCs in leading to porous materials in a range of states covering crystalline solids, soft matter, liquids and composites. We finish by providing an outlook on the opportunities for this work to serve as a foundation for the development of increasingly complex functional porous materials structured over various length scales.

Modulating Polymer Dynamics via Supramolecular Interaction with Ultrasmall Nanocages for Recyclable Gas Separation Membranes with Intrinsic Microporosity

The engineering of mixed-matrix membranes is severely hindered by the trade-off between mechanical performance and effective utilization of inorganic fillers' microporosity. Herein, we report a feasible approach for optimal gas separation membranes through the fabrication of coordination nanocages with poly(4-vinylpyridine) (P4VP) via strong supramolecular interactions, enabling the homogeneous dispersion of nanocages in polymer matrixes with long-term structural stability. Meanwhile, suggested from dynamics studies, the strong attraction between P4VP and nanocages slows down polymer dynamics and rigidifies the polymer chains, leading to frustrated packing and lowered densities of the polymer matrix. This effect allows the micropores of nanocages to be accessible to external gas molecules, contributing to the intrinsic microporosity of the nanocomposites and the simultaneous enhancement of permselectivities. The facile strategy for supramolecular synthesis and polymer dynamics attenuation paves avenues to rational design of functional hybrid membranes for gas separation applications.

Metal–organic cages for molecular separations

Separation technology is central to industries as diverse as petroleum, pharmaceuticals, mining and life sciences. Metal-organic cages, a class of molecular containers formed via coordination-driven self-assembly, show great promise as separation agents. Precise control of the shape, size and functionalization of cage cavities enables them to selectively bind and distinguish a wide scope of physicochemically similar substances in solution. Extensive research has, thus, been performed involving separations of high-value targets using coordination cages, ranging from gases and liquids to compounds dissolved in solution. Enantiopure capsules also show great potential for the separation of chiral molecules. The use of crystalline cages as absorbents, or the incorporation of cages into polymer membranes, could increase the selectivity and efficiency of separation processes. This Review covers recent progress in using metal-organic cages to achieve separations, with discussion of the many methods of using them in this context. Challenges and potential future developments are also discussed.

The rise of metal-organic polyhedra

Metal-organic polyhedra are a member of metal-organic materials, and are together with metal-organic frameworks utilized as emerging porous platforms for numerous applications in energy- and bio-related sciences. However, metal-organic polyhedra have been significantly underexplored, unlike their metal-organic framework counterparts. In this review, we will cover the topologies and the classification of metal-organic polyhedra and share several suggestions, which might be useful to synthetic chemists regarding the future directions in this rapid-growing field.

Molecularly Mixed Composite Membranes: Challenges and Opportunities

The fabrication of porous molecules, such as metal-organic polyhedra (MOPs), porous organic cages (POCs) and others, has given rise to the potential for creating "solid solutions" of molecular fillers and polymers. Such solid solutions circumvent longstanding interface issues associated with mixed matrix membranes (MMMs), and are referred to as molecularly mixed composite membranes (MMCMs) to distinguish them from traditional two-phase MMMs. Early investigations of MMCMs highlight the advantages of solid solutions over MMMs, including dispersion of the filler, anti-plasticization of the polymer network, and removal of deleterious interfacial issues. However, the exact microscopic structure as well as the transport modality in this new class of membrane are not well understood. Moreover, there are clear engineering challenges that need to be addressed for MMCMs to transition into the field. In this Minireview, the authors outline several scientific and technological challenges associated with the aforementioned questions and their suggestions to tackle them.

Constructing Connected Paths between UiO-66 and PIM-1 to Improve Membrane CO2 Separation with Crystal-Like Gas Selectivity

Most metal-organic-framework- (MOF-) based hybrid membranes face the challenge of low gas permeability in CO₂ separation. This study presents a new strategy of interweaving UiO-66 and PIM-1 to build freeways in UiO-66-CN@sPIM-1 membranes for fast CO₂ transport. In this strategy, sPIM-1 is rigidified via thermal treatment to make polymer voids permanent, and concurrently polymer chains are mutually linked onto UiO-66-CN crystals to minimize interfacial defects. The pore chemistry of UiO-66-CN is kept intact in hybrid membranes, allowing full utilization of MOF pores and selective adsorption for CO₂ . Separation results show that UiO-66-CN@sPIM-1 membranes possess exceptionally high CO₂ permeability (15433.4-22665 Barrer), approaching to that of UiO-66-NH₂ crystal (65-75% of crystal-derived permeability). Additionally, the CO₂ /N₂ permeation selectivity for a representative membrane (23.9-28.6) moves toward that of single crystal (24.6-29.6). The unique structure and superior CO₂ /N₂ separation performance make UiO-66-CN@sPIM-1 membranes promising in practical CO₂ separations.

Advanced Porous Materials in Mixed Matrix Membranes

Membrane technology has gained great interest in industrial separation processing over the past few decades owing to its high energy efficiency, small capital investment, environmentally benign characteristics, and the continuous operation process. Among various types of membranes, mixed matrix membranes (MMMs) combining the merits of the polymer matrix and inorganic/organic fillers have been extensively investigated. With the rapid development of chemistry and materials science, recent studies have shifted toward the design and application of advanced porous materials as promising fillers to boost the separation performance of MMMs. Here, first a comprehensive overview is provided on the choices of advanced porous materials recently adopted in MMMs, including metal-organic frameworks, porous organic frameworks, and porous molecular compounds. Novel trends in MMMs induced by these advanced porous fillers are discussed in detail, followed by a summary of applying these MMMs for gas and liquid separations. Finally, a concise conclusion and current challenges toward the industrial implementation of MMMs are outlined, hoping to provide guidance for the design of high-performance membranes to meet the urgent needs of clean energy and environmental sustainability.

Modular Design of Porous Soft Materials via Self-Organization of Metal-Organic Cages

Metal-organic frameworks (MOFs) and porous coordination polymers (PCPs) have been well-recognized as emerging porous materials that afford highly tailorable and well-defined nanoporous structures with three-dimensional lattices. Because of their microporous nature, MOFs can accommodate small molecules in their lattice structure, thus discriminating them on the basis of their size and physical properties and enabling their separation even in the gas phase. Such characteristics of MOFs have attracted significant attention in recent years for diverse applications and have ignited a worldwide race toward their development in both academic and industrial fields. Most recently, new challenges in porous materials science demand processable liquid, melt, and amorphous forms of MOFs. This trend will provide a new fundamental class of microporous materials for further widespread applications in many fields. In particular, the application of flexible membranes for gas separation is expected as an efficient solution to tackle current energy-intensive issues. To date, amorphous MOFs have been prepared in a top-down approach by the introduction of disorder into the parent frameworks. However, this new paradigm is still in its infancy with respect to the rational design principles that need to be developed for any approach that may include bottom-up synthesis of porous soft materials. Herein we describe recent progress in bottom-up "modular" approaches for the synthesis of porous, processable MOF-based materials, wherein metal-organic cages (MOCs), alternatively called metal-organic polyhedra (MOPs), are used as "modular cavities" to build porous soft materials. The outer periphery of a MOP is decorated with polymeric and dendritic side chains to obtain a polymer-grafted MOP, imparting both solution and thermal processability to the MOP cages, which have an inherent nanocavity along with high tailorability analogous to MOFs. Well-ordered MOP assemblies can be designed to obtain phases ranging from crystals to liquid crystals, allowing the fabrication of flexible free-standing sheets with preservation of the long-range ordering of MOPs. Furthermore, future prospects of the modular design for porous soft materials are provided with the anticipation that the bottom-up design will combine porous materials and soft matter sciences, leading to the discovery and development of many unexplored new materials and devices such as MOF-based self-healing membranes possessing well-defined nanochannels. The macroscopic alignment of channels can be controlled by external factors, including electric and magnetic fields, external forces, and modified surfaces (templating and patterning), which are conventionally used for engineering of soft materials.

Modeling Permeation through Mixed-Matrix Membranes: A Review

Over the past three decades, mixed-matrix membranes (MMMs), comprising an inorganic filler phase embedded in a polymer matrix, have emerged as a promising alternative to overcome limitations of conventional polymer and inorganic membranes. However, while much effort has been devoted to MMMs in practice, their modeling is largely based on early theories for transport in composites. These theories consider uniform transport properties and driving force, and thus models for the permeability in MMMs often perform unsatisfactorily when compared to experimental permeation data. In this work, we review existing theories for permeation in MMMs and discuss their fundamental assumptions and limitations with the aim of providing future directions permitting new models to consider realistic MMM operating conditions. Furthermore, we compare predictions of popular permeation models against available experimental and simulation-based permeation data, and discuss the suitability of these models for predicting MMM permeability under typical operating conditions.