Hydrogen Doping into MoO3 Supports toward Modulated Metal-Support Interactions and Efficient Furfural Hydrogenation on Iridium Nanocatalysts

Promoting Amination of Furfural to Furfurylamine by Metal-Support Interactions on Pd/MoO3-x Catalysts

The reductive amination of carbonyl compounds is one of the most straightforward protocols to construct C-N bonds, but highly desires active and selective catalysts. Herein, Pd/MoO3-x catalysts are proposed for furfural amination, in which the interactions between Pd nanoparticles and MoO3-x supports can be easily ameliorated by varying the preparation temperature toward efficient catalytic turnover. Thanks to the synergistic cooperation of MoV -rich MoO3-x and highly dispersed Pd, the optimal catalysts afford the high yield of furfurylamine (84 %) at 80 °C. Thereinto, MoV species not only acts as the acidic promoter to facilitate the activation of carbonyl groups, but also interacts with Pd nanoparticles to promote the subsequent hydrogenolysis of Schiff base N-furfurylidenefurfurylamine and its germinal diamine. The good efficiency of Pd/MoO3-x within a broad substrate scope further highlights the key contribution of metal-support interactions to the refinery of biomass feedstocks.

Development of defective molybdenum oxides for photocatalysis, thermal catalysis, and photothermal catalysis

The localized surface plasmon resonance (LSPR) of noble metals has been investigated for decades for applications in various catalysis reactions and optical research studies, but its development has been hampered by inefficient light absorption and high costs. In comparison, the creation of less expensive semiconductors (metal oxides) with strong plasmonic absorption is an appealing option, particularly defective molybdenum oxide (H_xMoO_3-y) has received considerable attention and investigation as a promising plasmonic material for a variety of catalytic reactions (photocatalysis, thermocatalysis, photothermal catalysis, etc.).The LSPR effect of H_xMoO_3-y can be tuned throughout a broad spectrum range from visible to near-infrared (NIR) by altering the doping amount by electrochemical control, chemical reduction, or photochemical control. Notably, defects (oxygen vacancies) in H_xMoO_3-y arise in conjunction with the LSPR effect, resulting in the formation of unique and useful active sites in a range of catalytic processes. In this review, we explore the formation mechanism of H_xMoO_3-y with plasmonic features and discuss its applications in photocatalysis, thermocatalysis, and photothermal catalysis.

Optoelectronic Properties of α-MoO3 Tuned by H Dopant in Different Concentration

The optoelectronic properties of layered α-MoO3 are greatly limited due to its wide band gap and low carrier concentration. The insertion of hydrogen (H) can effectively tune the band structure and carrier concentration of MoO3. Herein, first-principles calculations were performed to unravel the physical mechanism of a H-doped α-MoO3 system. We found that the modulation of the electronic structure of H-doped MoO3 depends on the doping concentration and position of the H atoms. It was found that the band gap decreases at 8% doping concentration due to the strong coupling between Mo-4d and O-2p orbits when H atoms are inserted into the interlayer. More interestingly, the band gap decreases to an extreme due to the Mo-4d orbit when all the H atoms are inserted into the intralayer only, which has a remarkable effect on light absorption. Our research provides a comprehensive theoretical discussion on the mechanism of H-doped α-MoO3 from the doping positions and doping concentrations, and offers useful strategies on doping modulation of the photoelectric properties of layered transition metal oxides.

Selective hydrogenation of butyl levulinate to γ-valerolactone over sulfonated activated carbon-supported SnRuB bifunctional catalysts

The sulfonated activated carbon (SAC) supported SnRuB catalyst was developed through the co-impregnation followed by a chemical reduction process and applied for BL hydrogenation to GVL for the first time.

H-spilled storage to maximize the catalytic performances of Pd-based bimetals@Ti3C2Tx MXene in selective semihydrogenations

Hydrogen spillover is an important theme for hydrogen storage and H-involving catalytic reactions. This work shows that catalytic reactivity and selectivity can be revealed by differentiating energetic characteristics of the...

Interlayer engineering of molybdenum disulfide toward efficient electrocatalytic hydrogenation

Electrocatalytic hydrogenation (ECH) enables the sustainable production of chemicals under ambient condition; however, suffers from serious competition with hydrogen (H₂) evolution and the use of precious metals as electrocatalysts. Herein, molybdenum disulfide is for the first time developed as an efficient and noble-metal-free catalyst for ECH via in situ intercalation of ammonia or alkyl-amine cations. This interlayer engineering regulates phase transition (2H → 1 T), and effectively ameliorates electronic configurations and surface hydrophobicity to promote the ECH of biomass-derived oxygenates, while prohibiting H₂ evolution. The optimal one intercalated by dimethylamine (MoS₂-DMA) is capable of hydrogenating furfural (FAL) to furfuryl alcohol with high Faradaic efficiency of 86.3%-73.3% and outstanding selectivity of >95.0% at -0.25 to -0.65 V (vs. RHE), outperforming MoS₂ and other conventional metals. Such prominent performance stems from the enhanced chemisorption and surface hydrophobicity. The chemisorption of H intermediate and FAL, synchronously strengthened on the edge-sites of MoS₂-DMA, accelerates the surface elementary step following Langmuir-Hinshelwood mechanism. Moreover, the improved hydrophobicity benefits FAL affinity to overcome diffusion limitation. Discovering the effective modulation of MoS₂ from a typical H₂ evolution electrocatalyst to a promising candidate for ECH, this study broadens the scope to exploit catalysts used for electrochemical synthesis.

Highly Efficient Ir-CoOx Hybrid Nanostructures for the Selective Hydrogenation of Furfural to Furfuryl Alcohol

Decoration of noble metals with transition-metal oxides has been intensively studied for heterogeneous catalysis. However, controllable syntheses of metal-metal oxide heterostructures are difficult, and elucidation of such interfaces is still challenging. In this work, supported IrCo alloy nanoparticles are transformed into supported Ir-CoO_x close-contact nanostructures by in situ calcination and following selective reduction. Relative to Ir/Al₂O₃, Ir-CoO_x/Al₂O₃ shows greatly enhanced activities for the hydrogenation of furfural derivatives to the corresponding furfuryl alcohol derivatives with more than 99% selectivity and demonstrates significantly improved activities and selectivity for hydrogenations of α,β-unsaturated aldehydes to α,β-unsaturated alcohols. The modification of Ir surfaces with CoO_x prevents Ir nanoparticles from growing, achieving high thermal and catalytic stabilities. Theoretic calculation suggests that the better catalytic performance of Ir-CoO_x/Al₂O₃ is ascribed to the Ir-CoO_x interaction, which promotes the absorption of furfural as well as desorption of furfuryl alcohol, resulting in enhanced catalytic activities.

Solvent-Free Hydrodeoxygenation of Triglycerides to Diesel-like Hydrocarbons over Pt-Decorated MoO2 Catalysts

In the present work, the solvent-free hydrodeoxygenation of palm oil as a representative triglyceride model compound to diesel-like hydrocarbons was evaluated in a batch reactor using Pt-decorated MoO₂ catalysts. The catalysts with various Pt loadings (0.5-3%) were synthesized by an incipient wetness impregnation method. The metallic Pt and MoO₂ phases were detected in the XRD patterns of as-prepared catalysts after the reaction and acted as active components for the deoxygenation reactions. The XPS experiments confirmed the existence of metallic Pt and PtO _x species. The XANES investigation of Mo L₃-edge spectra elucidated a change in the valence state by the transformation of MoO₃ into MoO₂ species after the deoxygenation reaction. The TEM observation revealed the formation of Pt nanoparticles in the range of 1-3 nm decorated on MoO₂ species. The number of acid sites increased with stronger metal-support interactions on increasing the Pt loading. The catalytic performance of the MoO₂ catalyst significantly improved with a small amount of Pt decoration. However, the further increase in Pt loading did not relatively increase the deoxygenation activity due to the formation of the agglomerated Pt particles. The high performance of the decorated catalysts could be attributed to the moderate acidity from the Pt dispersed on MoO₂ toward decarbonylation and decarboxylation reactions.

Fabrication of Ir-CoOx@mesoporous SiO2 Nanoreactors for Selective Hydrogenation of Substituted Nitroaromatics

Nanosized Ir catalysts suffer from serious side reactions and poor stability during hydrogenation of substituted nitroaromatics to produce aromatic amines. In this work, core-shell nanostructures with sub-4 nm Ir-CoO_x hybrid cores and mesoporous SiO₂ shells were designed and prepared to overcome these problems. The Ir-CoO_x hybrid cores were converted from IrCo alloy nanoparticles (NPs) inside SiO₂ through in situ calcination and reduction pretreatments. The SiO₂ mesoporous shells in Ir-CoO_x@SiO₂ nanoreactors prevented the agglomeration/sintering of IrCo NPs, while allowing the free reactants and products (big molecules). The synergy between Ir and CoO_x species improved H₂ adsorption, thus affecting the reaction rate as well as the selectivity to aromatic amines. As a result, the obtained Ir-CoO_x@SiO₂ nanocatalyst showed tremendous improvement in catalytic activity, selectivity, and stability.

Molybdenum-Incorporated Mesoporous Silica: Surface Engineering toward Enhanced Metal-Support Interactions and Efficient Hydrogenation

In heterogeneous catalysis, strong metal-support interactions are highly desired to improve catalytic turnover on metal catalysts. Herein, molybdenum is uniformly incorporated into mesoporous silica (KIT-6) to accomplish strong interactions with iridium catalysts, and consequently, active and selective hydrogenation of carbonyl compounds. Mo-incorporated KIT-6 (Mo-KIT-6) affords electronic interactions to improve the proportion of metallic Ir⁰ species, avoiding the easy surface oxidation of ultrafine metals in silica mesocavities. Owing to the effective H₂ activation and subsequent hydrogenation on metallic Ir⁰ sites, optimal Ir/Mo-KIT-6 with a high Ir⁰/Ir^δ+ ratio delivers prominent performance in the hydrogenation of amides to amines and α,β-unsaturated aldehydes to unsaturated alcohols. As for N-acetylmorpholine hydrogenation, the Ir/Mo-KIT-6 catalyst achieves efficient turnover toward N-ethylmorpholine with high selectivity (>99%) and exhibits activity that relies on the engineered chemical state of Ir sites. Such promotion is further proved to be universal in cinnamaldehyde hydrogenation. This work will provide new opportunities for catalyst design through surface/interface engineering.

Enhancing formaldehyde oxidation on iridium catalysts using hydrogenated TiO2 supports

Hydrogenated TiO₂ nanoparticles with rich hydroxyls were utilized as robust supports for Ir, accomplishing an obviously improved HCHO oxidation.