Chemistry of Metallacyclobutadienes

Metallacyclobutadienes: Intramolecular Rearrangement from Kinetic to Thermodynamic Isomers

Metallacyclobutadienes (MCBDs) are key intermediates of alkyne metathesis reactions. There are in principle two isomerization pathway from kinetic to thermodynamic MCBDs, intermolecular and intramolecular. However, systems that simultaneously isolate two kinds of MCBD isomers have not been achieved, thus restricting the mechanistic studies of the isomerization. Here the reactivity of a metallapentalyne that contains an M≡C bond within the aromatic ring, with alkynes to afford a series of MCBD-fused metallapentalenes is studied. In some cases, both kinetic and thermodynamic products are isolated in the same system, which has never been observed in previous MCBD reactions. Furthermore, the isomerization of MCBD-fused metallapentalenes is investigated both experimentally and theoretically, indicating that it is an intramolecular process involving a metallatetrahedrane (MTd) intermediate. This research provides experimental evidence demonstrating that one MCBD can undergo intramolecular rearrangement to transform into another.

Probing σ-Aromaticity-Driven Ring Contraction of Metallabenzocyclobutadiene to Metallabenzocyclopropene

Ring contraction of metallacyclobutadiene to metallacyclopropene is rare because of the increasing strain from a four-membered ring to a three-membered one. Here we demonstrate a new series of reactions of metallabenzocyclobutadiene to metallabenzocyclopropene via density functional theory calculations. The results suggest that these reactions are thermodynamically favorable ranging from -17.4 to -29.4 kcal mol-1, and a low reaction barrier (10.3 kcal mol-1) is achieved when the metal center is Ru and the ligands are one cyanide and one chloride. Further analysis suggests that a strengthened binding energy helps stabilize the transition state in the protonation process. The aromaticity during the reaction was investigated using the electron density of delocalized bonds (EDDB), isomerization stabilization energy, and isodesmic reactions. The EDDB shows that the π-conjugation is disrupted in the intermediate, and then σ-aromaticity is generated and dominant in the products. Our findings could be helpful for experimentalists in developing novel ring contraction reactions driven by aromaticity.

Stable cyclopropenylvinyl ligands via insertion into a transient cyclopropenyl metal bond

Treatment of the rhodium pincer complexes [RhCl(RPm)] (RPm = N,N'-bis(di-R-phosphinomethyl)perimidinylidene, R = Ph, Cy) with triphenylcyclopropenium hexafluorophosphate affords rhodacyclobutadiene complexes. These in turn react with activated alkynes (RCCCO2Me, R = H, CO2Me) to afford unusually stable cyclopropenylvinyls, implicating the intermediacy of σ-cyclopropenyl isomers. In contrast, treatment of [RhCl{py(NHPtBu2)2-2,6}] with the same reagent instead results in double functionalisation (SEAr) at the pincer backbone.

Craig-Hückel Hybrid Aromatic Metalla-dehydro[11]annulenes Constructed by a Formal [10+1] Cycloaddition Reaction

Aromatic metalla-annulenes are important aromatic compounds, research into which has been mainly concentrated on metal-benzenes and their lower homologues. Reports on their superior homologs are rare, and this has greatly limited the systematic study of their properties. In this work, a series of osma-dehydro[11]annulenes with good air and thermal stability were prepared in high yields through a simple [10+1] strategy, by incorporating a metal fragment into conjugated ten-carbon chains in a one-pot reaction. They are the first monometallic aromatic metalla-[n]annulenes with the ring size larger than 6, and their Craig-Hückel hybrid aromaticity is supported by various physical and computational parameters. Besides, these complexes show versatile reactivities, not only giving further evidence for their aromaticity, but also demonstrating their physical and chemical properties can easily be regulated. This work enriches the metalla-aromatic chemistry, and provides a new avenue for the synthesis of large metalla-annulenes with different ring sizes.

Vanadium Alkylidyne Initiated Cyclic Polymer Synthesis: The Importance of a Deprotiovanadacyclobutadiene Moiety

Reported is the catalytic cyclic polymer synthesis by a 3d transition metal complex: a V(V) alkylidyne, [(dBDI)V≡CtBu(OEt2)] (1-OEt2), supported by the deprotonated β-diketiminate dBDI2- (dBDI2- = ArNC(CH3)CHC(CH2)NAr, Ar = 2,6-iPr2C6H3). Complex 1-OEt2 is a precatalyst for the polymerization of phenylacetylene (PhCCH) to give cyclic poly(phenylacetylene) (c-PPA), whereas its precursor, complex [(BDI)V≡CtBu(OTf)] (2-OTf; BDI- = [ArNC(CH3)]2CH, Ar = 2,6-iPr2C6H3, OTf = OSO2CF3), and the zwitterion [((C6F5)3B-dBDI)V≡CtBu(OEt2)] (3-OEt2) exhibit low catalytic activity despite having a neopentylidyne ligand. Cyclic polymer topologies were verified by size-exclusion chromatography (SEC) and intrinsic viscosity studies. A component of the mechanism of the cyclic polymerization reaction was probed by isolation and full characterization of 4- and 6-membered metallacycles as model intermediates. Metallacyclobutadiene (MCBD) and deprotiometallacyclobutadiene (dMCBD) complexes (dBDI)V[C(tBu)C(H)C(tBu)] (4-tBu) and (BDI)V[C(tBu)CC(Mes)] (5-Mes), respectively, were synthesized upon reaction with bulkier alkynes, tBu- (tBuCCH) and Mes-acetylene (MesCCH), with 1-OEt2. Furthermore, the reaction of the conjugate acid of 1-OEt2, [(BDI)V≡CtBu(OTf)] (2-OTf), with the conjugated base of phenylacetylene, lithium phenylacetylide (LiCCPh), yields the doubly deprotio-metallacycle complex, [Li(THF)4]{(BDI)V[C(Ph)CC(tBu)CC(Ph)]} (6). Protonation of the doubly deprotio-metallacycle complex 6 yields 6-H+, a catalytically active species toward the polymerization of PhCCH, for which the polymers were also confirmed to be cyclic by SEC studies. Computational mechanistic studies complement the experimental observations and provide insight into the mechanism of cyclic polymer growth. The noninnocence of the supporting dBDI2- ligand and its role in proton shuttling to generate deprotiometallacyclobutadiene (dMCBD) complexes that proposedly culminate in the formation of catalytically active V(III) species are also discussed. This work demonstrates how a dMCBD moiety can react with terminal alkynes to form cyclic polyalkynes.

Metallaaromatic Complexes as Candidates for Future Molecular Materials and Electronic Devices: Recent Advancements

In recent years, the field of organometallic chemistry has made a great progress and diverse types of metallaaromatics have successively been reported. In those studies, incorporation of ligated osmium centers into metallaaromatic systems played a prominent role. The reviewed literature documents that certain metallaaromatics with unconventional photophysical properties, redox and electronic transport properties and magnetism, have potential to be widely used in diverse practical applications, with selected examples of amino acid and fluoride anion identification, photothermal effects, functional materials, photodynamic therapy (PDT) in biomedicine, single-molecule junction conductors, and electron-transport layer materials (ETLs) in solar cells.

A Metallabicycle From Thiocarbonyl-Cyclopropenium Coupling

Addition of triphenylcyclopropenium bromide to the thiocarbonyl complex [RhCl(CS)(PPh3 )2 ] affords novel bicyclic metalla-3-mercapto-thiapyrylliums [Rh(κ2 -C,S-C5 S2 Ph3 )(PPh3 )2 X2 ] (X=Cl, Br) - heterocycles with no metal-free isolobal precedent. Halide abstraction with silver triflate (AgOTf) in acetonitrile affords the salt [Rh(κ2 -C,S-C5 S2 Ph3 )(NCMe)2 (PPh3 )2 {Ag(OH2 )2 }{Ag(OTf)3 }]-OTf which in turn reacts with sodium chloride to return [Rh(κ2 -C,S-C5 S2 Ph3 )(PPh3 )2 Cl2 ].

Carbene-Like Reactivity in an Iron Azametallacyclobutene Complex: Insights from Electronic Structure

Herein we describe our investigation into the electronic structure of the first isolated monometallic iron azametallacyclobutene complex. Computational analysis through density functional theory calculations reveals electron delocalization throughout the four atoms of the ring system, in line with experimental observations and supporting the classification of this complex as a conjugated metallacycle. The results of this study also point to significant contribution from an imine-substituted iron carbene resonance structure to the overall bonding picture for the azametallacyclobutene. Accordingly, this complex participates in carbene-like reactivity in the presence of an isocyanide substrate to generate a ketenimine product. The related reaction with carbon monoxide leads to the isolation of a five-membered metallacycle that is analogous to the proposed intermediate in ketenimine formation, and confirms the α-carbon as the site of reactivity.

Synthesis and Characterization of Rhena[10]annulynes

Most of the reported metallacycles were limited to small cyclic complexes that contain six-membered or smaller rings. Larger-membered metallacycles are still rare and mainly focus on the dimetallacycles. Herein, we...

The Ascent of Alkyne Metathesis to Strategy-Level Status

For numerous enabling features and strategic virtues, contemporary alkyne metathesis is increasingly recognized as a formidable synthetic tool. Central to this development was the remarkable evolution of the catalysts during the past decades. Molybdenum alkylidynes carrying (tripodal) silanolate ligands currently set the standards; their functional group compatibility is exceptional, even though they comprise an early transition metal in its highest oxidation state. Their performance is manifested in case studies in the realm of dynamic covalent chemistry, advanced applications to solid-phase synthesis, a revival of transannular reactions, and the assembly of complex target molecules at sites, which one may not intuitively trace back to an acetylenic ancestor. In parallel with these innovations in material science and organic synthesis, new insights into the mode of action of the most advanced catalysts were gained by computational means and the use of unconventional analytical tools such as ⁹⁵Mo and ¹⁸³W NMR spectroscopy. The remaining shortcomings, gaps, and desiderata in the field are also critically assessed.

Electrophilic aromatic substitution reactions of compounds with Craig-Möbius aromaticity

Electrophilic aromatic substitution (EAS) reactions are widely regarded as characteristic reactions of aromatic species, but no comparable reaction has been reported for molecules with Craig-Möbius aromaticity. Here, we demonstrate successful EAS reactions of Craig-Möbius aromatics, osmapentalenes, and fused osmapentalenes. The highly reactive nature of osmapentalene makes it susceptible to electrophilic attack by halogens, thus osmapentalene, osmafuran-fused osmapentalene, and osmabenzene-fused osmapentalene can undergo typical EAS reactions. In addition, the selective formation of a series of halogen substituted metalla-aromatics via EAS reactions has revealed an unprecedented approach to otherwise elusive compounds such as the unsaturated cyclic chlorirenium ions. Density functional theory calculations were conducted to study the electronic effect on the regioselectivity of the EAS reactions.

Impact of Ligands and Metals on the Formation of Metallacyclic Intermediates and a Nontraditional Mechanism for Group VI Alkyne Metathesis Catalysts

The intermediacy of metallacyclobutadienes as part of a [2 + 2]/retro-[2 + 2] cycloaddition-based mechanism is a well-established paradigm in alkyne metathesis with alternative species viewed as off-cycle decomposition products that interfere with efficient product formation. Recent work has shown that the exclusive intermediate isolated from a siloxide podand-supported molybdenum-based catalyst was not the expected metallacyclobutadiene but instead a dynamic metallatetrahedrane. Despite their paucity in the chemical literature, theoretical work has shown these species to be thermodynamically more stable as well as having modest barriers for cycloaddition. Consequentially, we report the synthesis of a library of group VI alkylidynes as well as the roles metal identity, ligand flexibility, secondary coordination sphere, and substrate identity all have on isolable intermediates. Furthermore, we report the disparities in catalyst competency as a function of ligand sterics and metal choice. Dispersion-corrected DFT calculations are used to shed light on the mechanism and role of ligand and metal on the intermediacy of metallacyclobutadiene and metallatetrahedrane as well as their implications to alkyne metathesis.

Productive Alkyne Metathesis with "Canopy Catalysts" Mandates Pseudorotation

Molybdenum alkylidyne complexes of the “canopy catalyst” series define new standards in the field of alkyne metathesis. The tripodal ligand framework lowers the symmetry of the metallacyclobutadiene complex formed by [2 + 2] cycloaddition with the substrate and imposes constraints onto the productive [2 + 2] cycloreversion; pseudorotation corrects this handicap and makes catalytic turnover possible. A combined spectroscopic, crystallographic, and computational study provides insights into this unorthodox mechanism and uncovers the role that metallatetrahedrane complexes play in certain cases.

Metallaaromatic Chemistry: History and Development

Since the prediction of the existence of metallabenzenes in 1979, metallaaromatic chemistry has developed rapidly, due to its importance in both experimental and theoretical fields. Now six major types of metallaromatic compounds, metallabenzenes, metallabenzynes, heterometallaaromatics, dianion metalloles, metallapentalenes and metallapentalynes (also termed carbolongs), and spiro metalloles, have been reported and extensively studied. Their parent organic analogues may be aromatic, non-aromatic, or even anti-aromatic. These unique systems not only enrich the large family of aromatics, but they also broaden our understanding and extend the concept of aromaticity. This review provides a comprehensive overview of metallaaromatic chemistry. We have focused on not only the six major classes of metallaaromatics, including the main-group-metal-based metallaaromatics, but also other types, such as metallacyclobutadienes and metallacyclopropenes. The structures, synthetic methods, and reactivities are described, their applications are covered, and the challenges and future prospects of the area are discussed. The criteria commonly used to judge the aromaticity of metallaaromatics are presented.

Vibrations tell the tale. A time-resolved mid-infrared perspective of the photochemistry of iron complexes

Time-resolved infrared spectroscopies are used to elucidate multiscalar photochemical processes of iron complexes.

Access to Metal-Bridged Osmathiazine Derivatives by a Formal [4+2] Cyclization

Treatment of osmacyclopentadiene derivatives 1 with phenyl or isopropyl isothiocyanate gave the fused five and six-membered osmacycles 2-5 by a formal [4+2] cyclization. The facile protonation of the newly generated exocyclic imine in complexes 2-5 afforded conjugation-extended osmacycle derivatives 6-9. Compounds 2-9 each contain two main-group heteroatoms (N and S) in the fused six-membered ring located at the ortho (for S) and para (for N) positions relative to the osmium centre; these species can be regarded as rare osma-1,3-thiazine derivatives and represent the first fused metallathiazine derivatives. In contrast to the non-planar organic 6H-1,3-thiazine, nearly coplanar metallathiazines 8 and 9 can be achieved by tuning the groups on the two nitrogen atoms. These unique metal-bridged osma-1,3-thiazine derivatives exhibit remarkable stabilities, broad spectral absorptions spanning the visible spectra, and considerable photothermal properties, which suggests their potential applications in material science.

7-Metalla-1,4-diphosphanorbornadienes: cycloaddition of monovalent group 13 NacNac complexes to a stable 1,4-diphosphinine

Monovalent group 13 NacNac complexes reacted as dienophiles with a tricyclic 1,4-diphosphinine to furnish first examples of 7-metalla-1,4-diphosphanorbornadienes via reversible [4 + 1]-cycloaddition reactions.

Synthesis and characterization of metallapentalenoxazetes by the [2+2] cycloaddition of metallapentalynes with nitrosoarenes

The cycloaddition of metallapentalynes with nitrosoarenes produces metallapentalenoxazetes, in which two unstable frameworks are stabilized with a metal fragment.

Well-Defined Alkyne Metathesis Catalysts: Developments and Recent Applications

Although alkyne metathesis has been known for 50 years, rapid progress in this field has mostly occurred during the last two decades. In this article, the development of several highly efficient and thoroughly studied alkyne metathesis catalysts is reviewed, which includes novel well-defined, in situ formed and heterogeneous systems. Various alkyne metathesis methodologies, including alkyne cross-metathesis (ACM), ring-closing alkyne metathesis (RCAM), cyclooligomerization, acyclic diyne metathesis polymerization (ADIMET), and ring-opening alkyne metathesis polymerization (ROAMP), are presented, and their application in natural product synthesis, materials science as well as supramolecular and polymer chemistry is discussed. Recent progress in the metathesis of diynes is also summarized, which gave rise to new methods such as ring-closing diyne metathesis (RCDM) and diyne cross-metathesis (DYCM).