L-Tryptophan-based pyrene conjugate for intracellular zinc-guided excimer emission and controlled nano-assembly

This article describes intracellular zinc-induced excimer emission and tuning of self-assembly from L-tryptophan-pyrene conjugate (1). The zinc-guided excimer formation is due to the interaction of the pyrene moiety in an excited state. AFM studies show the structural modification in the supramolecular nano-assembly of 1 from dome-shaped to porous surface after complexation with zinc ions. Further, the interaction of 1 with Zn(II) ion is also studied using DFT, Job's plot, NMR titration and HRMS. The results of Zn(II) ion determination in natural water samples and RAW 264.7 cells demonstrate the practical utility of 1.

In Situ Oxidation of Pyridyl-Dihydrobenzoimidazoquinazoline and the Synthesis of a Highly Luminescent Cd(II) Coordination Polymer: A Promising Candidate for Mutagenic Nitroaromatic Detection and Device Fabrication

Pyridyl-substituted imidazoquinoline, a potent fluorescent framework, is advantageous to architect multifunctional coordination networks for sensing and fabricating emergent electrical conductors. In this work, a Cd(II)-based one-dimensional (1D) coordination polymer (1D CP), [Cd(glu)2(pbiq)2(H2O)]n (1), [H2glu = glutaric acid and pbiq = 4-(6-(pyridin-4-yl)benzo[4,5]imidazo[1,2-c]quinazoline)], has been structurally confirmed by single-crystal X-ray crystallography. The H-bonding and π···π interactions built a three-dimensional (3D) supramolecular structure that strongly emits at 416 nm in acetonitrile suspension. Potentially intrusive nitroaromatics (NAs) and trinitrophenol (TNP) selectively quench the strong emission of 1, and the highest quenching is noted in the case of TNP. A detection limit (limit of detection (LOD)) of 1.51 × 10-7 M for TNP is determined. The band gap (3.31 eV) of 1 recognizes semiconducting behavior, and an electronic device is fabricated. The correlation of current vs voltage (I-V plot) reveals a substantial non-ohmic electrical conductivity of 1 (Λ: 1.10 × 10-5 S m-1) along with a low energy barrier (ΦB: 0.69), and the series resistance (Rs) becomes 6.21 kΩ.

A new NCDs@ZIF-90-based sensor: fluorescent "turn-on" detection of Al3+ ions with high selectivity and sensitivity

A new NCDs@ZIF-90 composite as fluorescence sensor was designed and prepared by encapsulation of N-doped carbon dots (NCDs) in metal-organic framework (MOF) ZIF-90 in one-pot synthesis. NCDs@ZIF-90 retained the crystal structure and high thermal stability of ZIF-90; meanwhile, it also displayed the good chemical stability. NCDs@ZIF-90 dispersion in ethanol exhibited selective "turn-on" fluorescence response towards Al³⁺. The other coexisting competing metal ions had no obvious influence on the sensing performance of NCDs@ZIF-90 for Al³⁺. The fluorescence intensity at 447 nm of NCDs@ZIF-90 dispersion in ethanol had good linear relation with the concentrations of Al³⁺ with a low detection limit of 3.196 μM. The fluorescence enhancement after the addition of Al³⁺ was attributed to the release of NCDs from the inside of ZIF-90 to ethanol solution. In addition, NCDs@ZIF-90 displayed good recovery in detection of Al³⁺ in water samples indicating its practical application capability. The high selectivity and sensitivity indicate that NCDs@ZIF-90 is a good candidate as a "turn-on" fluorescence chemosensor to identify and detect Al³⁺.

A new zinc-organic framework with 1D channel for constructing a ratiometric Al3+-selective sensor and four inputs INHIBIT logic gate

To develop Al³⁺ fluorescent sensor is significant because the abnormal levels of Al³⁺ in environment may pose great threat to human body. Herein, a novel metal-organic framework {Zn(Dpada)(Imdba)·H₂O}_n (Dpada = 3, 6-di(1H-imidazol-1-yl) pyridazine and Imdba = 2, 2'-iminodibenzoic acid), named Zn-MOF, has been architected with one-dimensional channel under hydrothermal conditions. Zn-MOF exhibits good thermal and solvent stability and can also keep structural integrity over the pH range of 5.0 - 9.0. Fluorescent experiments show that Zn-MOF has high selectivity and sensitivity towards Al³⁺ via ratiometric fluorescence signal changes (F_{470 nm}/F_{390 nm}) and the detection limit is evaluated to be 0.69 μM. In addition, Zn-MOF performs good recyclability in sensing of Al³⁺ with at least 5 cycles. Besides, an INHIBIT logic gate has been constructed with chemical ions (Al³⁺, Cr³⁺, Fe³⁺ and Hg²⁺) as input signals and emission ratio (F_{470 nm}/F_{390 nm}) as output signal. Significantly, Zn-MOF can be applied to tracing Al³⁺ using real water samples, presenting great potential in water quality monitoring application.

Fabrication and DFT Calculation of Amine-Functionalized Metal-Organic Framework as a Turn-On Fluorescence Sensor for Fe3+ and Al3+ Ions

Due to their important role in biological systems, it is urgent to develop a material that can rapidly and sensitively detect the concentration of Fe³⁺ and Al³⁺ ions. In this work, a brand-new Cd^II-based metal-organic framework [Cd(BTBD)₂(AIC)]_n (JXUST-18, BTBD = 4,7-bis(1H-1,2,4-triazol-1-yl)-2,1,3-benzothiadiazole and H₂AIC = 5-aminoisophthalic acid) with a 4-connected sql topology was designed and synthesized. The symmetrical Cd^II centers are linked by AIC^2- ligands with μ₃-η¹:η¹:η¹:η¹ coordination mode to form a [Cd₂(COO)₂] secondary building unit (SBU). The contiguous SBUs are further connected by BTBD ligands to form a two-dimensional (2D) layer structure. JXUST-18 can remain stable in aqueous solutions with pH values of 3-12 or in boiling water. Luminescent experiments suggest that JXUST-18 displays more than eightfold fluorescence enhancement in the presence of Fe³⁺ and Al³⁺ ions, and the detection limits for Fe³⁺ and Al³⁺ ions are 0.196 and 0.184 μM, respectively. Furthermore, the change in luminescence color is uncomplicatedly distinguishable with the naked eye under ultraviolet light at 365 nm. In addition, a series of devices based on JXUST-18 including fluorescence test strips, lamp beads, and composite films were developed to detect metal ions via visual changes in luminescence color. Significantly, JXUST-18 is a rare MOF-based turn-on fluorescence sensor for the detection of Fe³⁺ ions. The theoretical calculation suggests that the complexation of Fe³⁺/Al³⁺ ions and the -NH₂ group contributes to fluorescence enhancement.

Visual Hg(II) sensing in aqueous solution via a new 2,5-Bis(4-pyridyl)thiazolo[5,4-d]thiazole-based fluorescence coordination polymer

A new fluorescence coordination polymer [Zn(Py₂TTz)(5-OH-IPA)]_n (1) (Py₂TTz = 2,5-bis(4-pyridyl)thiazolo[5,4-d]thiazole, 5-OH-IPA = 5-hydroxyisophthalic acid dianion) was synthesized, which exhibited the characteristics of fluorescence quenching and bathochromic shift toward Hg(II) in aqueous solution at pH 7.00. Mechanism study showed that the interactions between Hg(II) ions and Py₂TTz ligands in 1 were responsible for the fluorescence emission change. Thanks to the specific interactions between 1 and Hg(II), excellent selectivity was achieved both in aqueous solution and in solid test paper. The detection limit of 1 for Hg(II) sensing was 125.76 nmol L^-1 and a linear rang was 1.00-10.00 μmol L^-1. More importantly, satisfactory recovery and accuracy of 1 for Hg(II) sensing were also obtained in buffer-free real water samples.

Luminescent Covalent Organic Frameworks for Biosensing and Bioimaging Applications

Luminescent covalent organic frameworks (LCOFs) have attracted significant attention due to their tunability of structures and photophysical properties at molecular level. LCOFs are built to highly ordered and periodic 2D or 3D framework structures through covalently assembling with various luminophore building blocks. Recently, the advantages of LCOFs including predesigned properties of structure, unique photoluminescence, hypotoxicity and good biocompatibility and tumor penetration, broaden their applications in biorelated fields, such as biosensing, bioimaging, and drug delivery. A specific review that analyses the advances of LCOFs in the field of biosensing and bioimaging is thus urged to emerge. Here the construction of LCOFs is reviewed first. The synthetic chemistry of LCOFs highlights the key role of chemical linkages, which not only concrete the building blocks but also affect the optical properties and even can act as the responsive sites for potential sensing applications. How to brighten LCOFs are clarified through description of structure managements. The ability to utilize the luminescence of LCOFs for applications in biosensing and bioimaging is discussed using state-of-the-art examples of varied practical goals. A prospect finally addresses opportunities and challenges the development of LCOFs facing from chemistry, physics to the applications, according to their current progress.

A Zn(II)-Based Sql Type 2D Coordination Polymer as a Highly Sensitive and Selective Turn-On Fluorescent Probe for Al3

A luminescent coordination polymer with the overall formula {[Zn(tr2btd)(bpdc)]∙DMF}n (where tr2btd = 4,7-di(1H-1,2,4-triazol-1-yl)-2,1,3-benzothiadiazole; bpdc = 4,4'-biphenyldicarboxylate) was synthesized and characterized by single-crystal and powder X-ray diffraction, thermogravimetric, infrared spectroscopy, and elemental analyses. Luminescent properties of the obtained compound were studied in detail both in the solid state and as a suspension in N,N-dimethylacetamide (DMA). It was found that {[Zn(tr2btd)(bpdc)]∙DMF}n exhibits bright turquoise luminescence with excellent quantum efficiency and demonstrates turn-on fluorescence enhancement effect upon soaking in DMA Al3+ solution. Fluorescence titration experiments were carried out and the detection limit for Al3+ ions was calculated to be 120 nM, which is among the lowest reported values for similar materials. Moreover, compound demonstrated excellent selectivity and reusability, and the mechanism of the response is discussed. These results indicate that {[Zn(tr2btd)(bpdc)]∙DMF}n is a promising probe for sensitive fluorescent Al3+ detection.

Fluorescent sensors for aldehydes based on luminescent metal-organic frameworks

Volatile aldehydes cause great harm to human health and the living environment, and the detection of aldehydes has attracted much attention from chemists and material scientists. In recent years, as one of the most promising classes of functional materials, luminescent metal-organic frameworks (LMOFs) have bloomed as fluorescent sensors for the detection of aldehydes. Herein, the sensing properties of LMOF sensors toward formaldehyde, benzaldehyde, acetaldehyde and other aldehydes have been reviewed, and the sensing mechanism and applications are also illustrated. Additionally, the current status and its potential development prospects in this field are outlined.

Highly Emissive Metal-Organic Frameworks for Sensitive and Selective Detection of Nitrofuran and Quinolone Antibiotics

The overuse of antibiotics makes its detection very significant for human health. New facile methods and high-performance sensory materials will be urgently needed for detection of antibiotics. Unfortunately, there are few reports on fluorescence enhancement of antibiotics detection. Herein, based on the modulability of the coordination mode, we proposed two MOFs with different coordination modes based on different metal ions: Zn-MOF (1) and Cd-MOF (2). The fluorescence of 1 and 2 can be efficiently and selectively quenched by nitrofuran antibiotics (nitrofurazone, NFZ and furazolidone, FZD) and chloramphenicol (CAP), respectively. Particularly, the matched energy levels between 2 and enrofloxacin (ENR) enables 2 with turn-on sensing for ENR. Moreover, apart from the sensitivity and selectivity, 1 and 2 also have strong recyclable ability, fast response time and anti-interference ability, which make them great potential sensory materials to detect antibiotics.

A fluorescence red-shift and turn-on sensor for acetylacetone derived from ZnII-based metal–organic framework with new topology

JXUST-4 with a rare (3,3,7)-c topology net has been prepared, acting as a fluorescent sensor for acac through obvious fluorescence red-shift and enhancement with excellent properties.

A multi-responsive MOF-based fluorescent probe for detecting Fe3+, Cr2O72− and acetylacetone

A novel ZnII-based MOF can selectively and sensitively recognize Fe3+, Cr2O72− and acetylacetone, simultaneously.

Distinct solvent-dependent luminescence sensing property of a newly constructed Cu(ii)–organic framework

The distinct solvent-dependent fluorescence sensing behavior of an extremely rare Cu(ii) MOF, showing the fluorescent “turn-off” sensing of Fe³⁺ and HCO₃⁻ in DMF and “turn-on” sensing of Al³⁺ in water.

A metal–organic framework featuring highly sensitive fluorescence sensing for Al3+ ions

A new fluorescent MOF can detect Al3+ ions with high selectivity and sensitivity via turn-off effect and emission color change.

Various carboxylates induced eight Zn(ii)/Cd(ii) coordination polymers with fluorescence sensing activities for Fe(iii), Cr(vi) and oxytetracycline

Eight new Zn(ii)/Cd(ii) coordination polymers constructed from a naphthalene-amide-pyridyl ligand and various carboxylates were synthesized and characterized, which show multifunctional fluorescence responses for cations, anions and antibiotics.

Naked Eye Cd2+ Ion Detection and Reversible Iodine Uptake by a Three-Dimensional Pillared-Layered Zn-MOF

A novel metal-organic framework (MOF), [Zn₂(tdca)₂(bppd)₂]·2DMF, has been synthesized solvothermally using the ligand thiophene-2,5-dicarboxylic acid (H₂tdca), coligand N,N'-bis(4-pyridylmethylene)-1,4-benzenediamine (bppd), and Zn(NO₃)₂. Single crystal X-ray crystallography reveals that the titled MOF is a three-dimensional pillared-layered MOF. A layer is constituted by a Zn(tdca) unit, and the layers are stabilized by the long hydrocarbon coligand, bppd, which acts as a pillar. A rectangular pore size of 11.42 × 8.12 Ų is found in the framework. The porous framework is found to be an excellent fluorescence sensor for the detection of toxic Cd²⁺ ion. The sensor shows high selectivity and sensitivity and a quick response toward Cd²⁺. The synthesized MOF is able to not only detect cadmium ions but also adsorb iodine in the gas phase. The MOF can adsorb ∼66% iodine, verified by thiosulfate-iodine titration and TG analysis. Adsorbed iodine can also be removed easily in acetonitrile as well as in n-hexane, which shows that iodine can be reversibly loaded as well as unloaded into the framework.

Solvent-Dependent Assembly and Magnetic Relaxation Behaviors of [Cu4I3] Cluster-Based Lanthanide MOFs: Acting as Efficient Catalysts for Carbon Dioxide Conversion with Propargylic Alcohols

Two structurally similar metal-organic frameworks (MOFs) [Dy₂Cu₄I₃(IN)₇(DMF)₂]·DMF (1) and [Dy₂Cu₄I₃(IN)₇(DMA)₂]·DMA (2) (HIN = isonicotinic acid) feathering different coordinated solvent molecules were successfully isolated by tuning the types of solvents in the reaction system. Structural tests indicate that 1 and 2 are both built from 1D Dy(III) chains and copper iodide clusters [Cu₄I₃], generating into three-dimensional frameworks with an open 1D channel along the a axis. 1 and 2 display extensive and excellent solvent stability. Magnetic studies of 1 and 2 indicate that they exhibit interesting solvent-dependent magnetization dynamics. Importantly, 1 and 2 can act as highly effective catalysts for the carboxylic cyclization of propargyl alcohols with carbon dioxide (CO₂) under ambient operating conditions. Additionally, the substrate scope was further explored over compound 1 based on the optimal conditions, and it exhibits efficient cyclic carboxylation of various terminal propargylic alcohols with CO₂. This research offers an effective approach for the solvent-guided synthesis of MOFs materials and also presents the great application value of MOFs in CO₂ chemical conversion.

Experimental and Theoretical Studies of Glyphosate Detection in Water by an Europium Luminescent Complex and Effective Adsorption by HKUST-1 and IRMOF-3

Designing an effective and simple detection method to quantify glyphosate (GLY) herbicide is desirable. Current chromatography-mass spectrometry and electrochemical methods can be used for this purpose, but these methods are difficult to be made portable and need high-cost equipment. Here, we evaluate a luminescent β-diketonate-Eu-ethylenediaminetetraacetic acid complex for GLY quantification in aqueous media on the basis of the luminescent quenching process. This complex successfully measured GLY at concentrations ranging from 5 × 10-7 to 10-5 mol L-1. Theoretical methods (LUMPAC) are also performed to identify the complex most probable structure in solution. We also demonstrate that the metal-organic frameworks HKUST-1 and IRMOF-3, easily synthesized, effectively adsorb GLY in water in about 30 min of contact.

Combining unsaturated metal sites and narrow pores within a Co(ii)-based MOF towards CO2 separation and transformation

Combining unsaturated metal sites and narrow pores within one framework, a unique Co^II-MOF have been prepared, which reveals excellent selective CO₂ uptake over N₂ and CH₄, and good performances in catalytic CO₂ conversion to cyclic carbonates.

Multifunctional fluorescence responses of phenyl-amide-bridged d10 coordination polymers structurally regulated by dicarboxylates and metal ions

Metal/carboxylate co-induced 1D → 3D phenyl-amide-bridged d¹⁰ coordination polymers that show multifunctional fluorescent responses for cations, anions and pesticides.

Single-atom implanted two-dimensional MOFs as efficient electrocatalysts for the oxygen evolution reaction

A facile and controllable synthesis strategy for bimetallic electrocatalysts for the OER from a two-dimensional iron-based metal–organic framework precursor has been reported, in which the Fe/Ni type exhibits the best efficiency and conversion.

A multifunctional photochromic metal–organic framework with Lewis acid sites for selective amine and anion sensing

A bipyridinium-based MOF was prepared, which exhibits reversible photochromic properties, good luminescence sensing ability for Cr₂O₇²⁻, and can be considered an excellent colorimetric sensor for the selective detection of amine vapors.

CdII -Organic Frameworks Fabricated with a N-Rich Ligand and Flexible Dicarboxylates: Structural Diversity and Multi-Responsive Luminescent Sensing for Toxic Anions and Ethylenediamine

Three metal-organic frameworks {[Cd(L)(glu)]⋅3 H₂ O}_∞ (1), {[Cd₂ (L)₂ (adi)₂ ]⋅5 H₂ O}_∞ (2) and {[Cd(L)(sub)]⋅3 H₂ O⋅DMA }_∞ (3) (L=pyridine-3,5-bis(5-azabenzimidazole), H₂ glu=glutaric acid, H₂ adi=adipic acid and H₂ sub=suberic acid) were obtained under solvothermal conditions. Complex 1 shows a 2D (4,4) network constructing of Cd₂ -glu and Cd-L chains. Complex 2 presents a 2-fold interpenetrating 3D framework with pcu topology. Complex 3 is a 3D framework with cds topology. Three complexes with versatile structures were obtained by changing aliphatic dicarboxylate ligands with different lengths based on a N-rich ligand. Moreover, the fluorescence measurements indicate that complex 1 is a good multifunctional chemosensor for the detection of Cr₂ O₇ ^2- and MnO₄ ^- anions by fluorescence quenching effect, and ethylenediamine by fluorescence enhancement effect, with detection limits of 1.196 ppm, 0.551 ppm and 64.572 ppm, respectively. Both complexes 2 and 3 can selectively sense Cr₂ O₇ ^2- anion with detection limits of 1.126 ppm for 2 and 0.831 ppm for 3 by a fluorescence quenching effect.