Pulsed Laser Deposition‐based Thin Film Microbatteries

All-Solid-State Thin Film μ-Batteries for Microelectronics

Continuous advances in microelectronics and micro/nanoelectromechanical systems enable the use of microsized energy storage devices, namely solid-state thin-film μ-batteries. Different from the current button batteries, the μ-battery can directly be integrated on microchips forming a very compact "system on chip" since no liquid electrolyte is used in the μ-battery. The all-solid-state battery (ASSB) that uses solid-state electrolyte has become a research trend because of its high safety and increased capacity. The solid-state thin-film μ-battery belongs to the family of ASSB but in a small format. However, a lot of scientific and technical issues and challenges are to be resolved before its real application, including the ionic conductivity of the solid-state electrolyte, the electrical conductivity of the electrode, integration technologies, electrochemical-induced strain, etc. To achieve this goal, understanding the processing of thin films and fundamentals of ion transfer in the solid-state electrolytes and hence in the μ-batteries becomes utmost important. This review therefore focuses on solid-state ionics and provides inside of ion transportation in the solid state and effects of chemistry on electrochemical behaviors and proposes key technology for processing of the μ-battery.

Ensemble Design of Electrode-Electrolyte Interfaces: Toward High-Performance Thin-Film All-Solid-State Li-Metal Batteries

In accordance with the fourth industrial revolution (4IR), thin-film all-solid-state batteries (TF-ASSBs) are being revived as the most promising energy source to power small electronic devices. However, current TF-ASSBs still suffer from the perpetual necessity of high-performance battery components. While every component, a series of a TF solid electrolyte (i.e., lithium phosphorus oxynitride (LiPON)) and electrodes (cathode and Li metal anode), has been considered vital, the lack of understanding of and ability to ameliorate the cathode (or anode)-electrolyte interface (CEI) (or AEI) has impeded the development of TF-ASSBs. In this work, we suggest an ensemble design of TF-ASSBs using LiPON (500 nm), an amorphous TF-V₂O_5-x cathode with oxygen vacancies (O_vacancy), a thin evaporated Li anode (evp-Li) with a thickness of 1 μm, and an artificial ultrathin Al₂O₃ layer between evp-Li and LiPON. Well-defined O_vacancy sites, such as O(II)_vacancy and O(III)_vacancy, in amorphous TF-V₂O_5-x not only allow isotropic Li⁺ diffusion at the CEI but also enhance both the ionic and electronic conductivities. For the AEI, we employed protective Al₂O₃, which was specially sputtered using the facing target sputtering (FTS) method to form a homogeneous layer without damage from plasma. In regard to the contact with evp-Li, interfacial stability, electrochemical impedance, and battery performance, the nanometric Al₂O₃ layers (1 nm) were optimized at different temperatures (40, 60, and 80 °C). The TF-ASSB cell containing Al₂O₃ (1 nm) delivers a high specific capacity of 474.01 mAh cm^-3 under 60 °C at 2 C for the 400th cycle, and it achieves a long lifespan as well as ultrafast rate capability levels, even at 100 C; these results were comparable to those of TF Li-ion battery cells using a liquid electrolyte. We demonstrated the reaction mechanism at the AEI utilizing time-of-flight secondary ion mass spectrometry (TOF-SIMS) and molecular dynamics (MD) simulations for a better understanding. Our design provides a signpost for future research on the rational structure of TF-LIBs.

An interlinked computational–experimental investigation into SnS nanoflakes for field emission applications

Layered binary semiconductor materials have attracted significant interest as field emitters due to their low work function, mechanical stability, and high thermal and electrical conductivity.

Sulfide and Oxide Inorganic Solid Electrolytes for All-Solid-State Li Batteries: A Review

Energy storage materials are finding increasing applications in our daily lives, for devices such as mobile phones and electric vehicles. Current commercial batteries use flammable liquid electrolytes, which are unsafe, toxic, and environmentally unfriendly with low chemical stability. Recently, solid electrolytes have been extensively studied as alternative electrolytes to address these shortcomings. Herein, we report the early history, synthesis and characterization, mechanical properties, and Li+ ion transport mechanisms of inorganic sulfide and oxide electrolytes. Furthermore, we highlight the importance of the fabrication technology and experimental conditions, such as the effects of pressure and operating parameters, on the electrochemical performance of all-solid-state Li batteries. In particular, we emphasize promising electrolyte systems based on sulfides and argyrodites, such as LiPS5Cl and β-Li3PS4, oxide electrolytes, bare and doped Li7La3Zr2O12 garnet, NASICON-type structures, and perovskite electrolyte materials. Moreover, we discuss the present and future challenges that all-solid-state batteries face for large-scale industrial applications.