Catalytic Nitrile Hydroboration: A Route to N,N-Diborylamines and Uses Thereof

Tri-coordinated zinc alkyl complexes with N^S/Se coordination of imino-phosphanamidinate chalcogenide ligands as precursors for efficient hydroboration of nitriles and esters

A series of tri-coordinated zinc alkyl complexes with the general molecular formula [κ2NE-{NHIRP(Ph)(E)N-Dipp}ZnEt] [R = Dipp (2,6-diisopropylphenyl), E = S (3a), Se (3b) and R = tBu (tert-butyl), E = S (4a), Se (4b)] bearing imino-phosphanamidinate chalcogenide ligands were prepared in good yields from the reaction between the protic imino-phosphanamidinate chalcogenide ligand [NHIRP(Ph)(E)NH-Dipp] [R = Dipp, E = S (1a), Se (1b) and R = tBu, E = S (2a), Se (2b)] and diethylzinc at room temperature. The molecular structures of all the zinc complexes were established by single-crystal X-ray diffraction analysis. In the solid state, all complexes exhibited a distorted trigonal planar geometry around the zinc ion. Metal-chalcogenide (Zn-S/Se) interactions were observed in the coordination sphere. These zinc alkyl complexes were employed as pre-catalysts in the hydroboration reaction of nitriles and esters to obtain the corresponding N,N-diborylamines and boronate esters, respectively, under ambient conditions. A wide substrate scope of nitriles and esters is presented.

Low-valent-tungsten catalysis enables hydroboration of esters and nitriles

In the research presented herein, low-valent-tungsten-catalyzed hydroboration of esters and nitriles was investigated. Aromatic and aliphatic substrates were smoothly reduced to corresponding alcohol derivatives and N,N-diborylamines in the presence of W(CO)4(NCMe)2. Valuable derivatives were conveniently accessed by introducing a further functionalization process to crude hydroboration mixtures in one pot.

X-type silyl ligands for transition-metal catalysis

Given the critical importance of novel ligand development for transition-metal (TM) catalysis, as well as the resurgence of the field of organosilicon chemistry and silyl ligands, to summarize the topic of X-type silyl ligands for TM catalysis is highly attractive and timely. This review particularly emphasizes the unique σ-donating characteristics and trans-effects of silyl ligands, highlighting their crucial roles in enhancing the reactivity and selectivity of various catalytic reactions, including small molecule activation, Kumada cross-coupling, hydrofunctionalization, C-H functionalization, and dehydrogenative Si-O coupling reactions. Additionally, future developments in this field are also provided, which would inspire new insights and applications in catalytic synthetic chemistry.

Gallium Hydride-Catalyzed Selective Hydroboration of Unsaturated Organic Substrates

The first examples of tetrasubstituted conjugated bis-guanidinate (CBG) supported monomeric and thermally stable gallium dihalides [LGaX2], (X=Cl (Ga-Cl), I (Ga-I)) and dihydride (Ga-H) [LGaH2] (where L={(ArHN)(ArN)-C=N-C=(NAr)(NHAr)}; Ar=2,6-Et2-C6H3) compounds are reported. The reaction of in situ generated LLi with 1.0 equiv. GaX3 (X=Cl, I) afforded compounds Ga-Cl and Ga-I. The reaction between Ga-Cl and Li[HBEt3] in benzene yielded the dihydride compound Ga-H. All reported compounds (Ga-Cl, Ga-I, and Ga-H) were characterized by NMR, HRMS, and single-crystal X-ray diffraction studies. Ga-H was probed for the hydroboration of carbodiimides (CDI), isocyanates, and isothiocyanates with HBpin. Compound Ga-H was also found effective for the catalytic hydroboration of imines, nitriles, alkynes, esters, and formates, affording the corresponding products in quantitative yields. Stoichiometric reactions with a CDI were performed to establish the catalytic cycle.

Iron complexes supported by silyl-NHC chelate ligands: synthesis and use for double hydroboration of nitriles

Iron complexes bearing new silyl-NHC bidentate ligands were synthesised by treating Fe3(CO)12 with a mixture of N-(hydrosilyl)methyl imidazolium salts and a base. These complexes showed high performance in the catalytic double hydroboration of nitrile with pinacolborane (HBpin) to produce N,N-bis(boryl)amine by a combination of UV irradiation and mild heating (60 °C). The product yields for the hydroboration of aromatic and aliphatic nitriles reached 85%-95% (NMR) using an iron complex (5 mol%). Reducing the loading amount of the iron complex to 0.5 mol% still afforded the products in high yields. An analogous ruthenium complex, which was similarly synthesised using Ru3(CO)12, showed lower activity. Stoichiometric reactions of the iron complex with nitriles afforded Fe(0)-N-silylimine complexes, which may be dormant states in nitrile hydroboration. A catalytic mechanism including Fe(0) N-silylimine species is proposed.

Moisture-Assisted Hydroboration of Nitriles and Conversion Thereof to N-Heterocyles and N-Containing Derivatives

The recent revelation of hidden-borane catalysis has revolutionized the field of catalytic hydroboration in organic synthesis. Many nucleophilic reaction promoters, previously believed to be the catalysts, in fact primarily facilitated the formation of borane (BH3), which subsequently acted as the true catalyst. This revelation prompted us to explore the untapped potential of these unexpected transformations, with a view to simplify hydroboration using more cost-effective and environmentally friendly nucleophilic precatalysts. Via computational studies, we were able to identify that water can actually undertake that role. Herein, we report a study on the simple hydroboration of nitriles, a notoriously challenging yet synthetically valuable class of substrates, using nothing more than moisture as an activating agent. This moisture-assisted nitrile hydroboration process can seamlessly integrate with a range of downstream transformations in a one-pot fashion to produce valuable N-containing products such as symmetrical imines, thioureas, and bis(alcohol)amines as well as N-heterocycles such as pyrroles, pyridines, pyridinium salts, 2-iminothiazolines, and carbazoles.

Metal-free C-H Borylation and Hydroboration of Indoles

The C-H borylation and hydroboration reactions have emerged as promising synthetic tools to construct organoboron compounds. Organoboron compounds of N-heterocycles, particularly indole derivatives, have found widespread application in a variety of fields. As a result, considerable advancement in the area of C-H borylation and hydroboration reactions of indoles was observed in the last few decades. Among the various synthetic methods applied, the metal-free approach has received special attention. This mini-review discusses the recent progress in the area of C-H borylation and hydroboration reactions of indoles under metal-free conditions, their scope, and brief mechanistic studies.

A robust Zintl cluster for the catalytic reduction of pyridines, imines and nitriles

Despite p-block clusters being known for over a century, their application as catalysts to mediate organic transformations is underexplored. Here, the boron functionalized [P7] cluster [(BBN)P7]2- ([1]2-; BBN = 9-borabicyclo[3.3.1]nonane) is applied in the dearomatized reduction of pyridines, as well as the hydroboration of imines and nitriles. These transformations afford amine products, which are important precursors to pharmaceuticals, agrochemicals, and polymers. Catalyst [1]2- has high stability in these reductions: recycling nine times in quinoline hydroboration led to virtually no loss in catalyst performance. The catalyst can also be recycled between two different organic transformations, again with no loss in catalyst competency. The mechanism for pyridine reduction was probed experimentally using variable time normalization analysis, and computationally using density functional theory. This work demonstrates that Zintl clusters can mediate the reduction of nitrogen containing substrates in a transition metal-free manner.

Notable Catalytic Activity of Transition Metal Thiolate Complexes against Hydrosilylation and Hydroboration of Carbon-Heteroatom Bonds

Chemists tend to use transition metal hydride complexes rather than thiolate complexes to catalyse chemical transformations because the hydride complexes possess diverse catalytic reactivity, although most of them are air/moisture-sensitive and difficult to prepare. By comparing the catalytic performances of pincer ligated group 10 metal thiolate and hydride complexes in catalysing the hydroboration and hydrosilylation of C=O and C=N bonds, we demonstrate in this review that transition metal thiolate complexes are much better catalysts than the corresponding hydride complexes in catalysing this type of reactions. Many hydroboration and hydrosilylation reactions catalysed by pincer ligated group 10 metal hydride complexes can also be catalysed by the corresponding thiolate complexes and the thiolate systems are far more active. Therefore, the applications of transition metal thiolate complexes in the catalytic hydroboration and hydrosilylation of unsaturated carbon-heteroatom bonds deserve special attention in future work.

Partner effect in accelerating pincer-co catalyzed nitrile hydroboration reactions

The pincer-Co catalyzed nitrile hydroboration of nitrile has been presented as an elegant strategy to afford amine synthesis; however, ligand engineering is required. We show here a strategy to tune the catalytic behavior of the organometallic catalyst, as an alternative approach to ligand engineering, by means of computational investigations to understand the effect of partners such as (18-crown-6)K⁺, W(CO)₃ and W(PMe₃)₃ on the reactivity of the pincer-Co catalyzed nitrile hydroboration reaction through π-coordination to the ligand aromatic ring. The extra additives bind the central phenyl ring of the ligand by either dispersion or chemical bonding. The electron-richness of the cobalt center is tuned by the partner, and follows the order (18-crown-6)K⁺ > W(PMe₃)₃ > no partner > W(CO)₃. While the influence of the covalent W-containing partners parallels the electron-richness of the W, the non-covalent partner, (18-crown-6)K⁺, surprisingly increases the donor ability of the pincer ligand through the polarization effect. All the elementary steps involved in the nitrile hydroboration reaction are influenced by the partner, and the overall barrier is lowered by a surprisingly large amount of 4.9 kcal mol^-1 in the presence of (18-crown-6)K⁺, suggesting a notable partner effect to be explored by experimentalists so that the reactivity of a catalyst can be tuned without ligand modification.

Comparing B-H Bond Activation in NiIIX(NNN)-Catalyzed Nitrile Dihydroboration (X = Anionic N-, C-, O-, S-, or P-donor)

One of the key steps in many metal complex-catalyzed hydroboration reactions is B-H bond activation, which results in metal hydride formation. Anionic ligands that include multiple lone pairs of electrons, in cooperation with a metal center, have notable potential in redox-neutral B-H bond activation through metal-ligand cooperation. Herein, using an easily prepared N_pyridineN_imineN_pyrrolide ligand (L²)^-, a series of divalent Ni^IIX(NNN) complexes were synthesized, with X = bromide (2), phenoxide (3), thiophenoxide (4), 2,5-dimethylpyrrolide (5), diphenylphosphide (6), and phenyl (7). The complexes were characterized using ¹H and ¹³C NMR spectroscopy, mass spectrometry, and X-ray crystallography and employed as precatalysts for nitrile dihydroboration. Superior activity of the phenoxy derivative (3) [vs thiophenoxy (4) or phenyl (7)] suggests that B-H bond activation occurs at the Ni-X (vs ligand Ni-N_pyrrolide) bond. Furthermore, stoichiometric treatment of 2-7 with a nitrile showed no reaction, whereas stoichiometric reactions of 2-7 with pinacolborane (HBpin) gave the same Ni-H complex for 2, 3, and 5. Considering that only 2, 3, and 5 successfully catalyzed nitrile dihydroboration, we suggest that the catalytic cycle involves a conventional inner sphere pathway initiated by substrate insertion into Ni-H.

B–N/B–H Transborylation: borane-catalysed nitrile hydroboration

The reduction of nitriles to primary amines is a useful transformation in organic synthesis, however, it often relies upon stoichiometric reagents or transition-metal catalysis. Herein, a borane-catalysed hydroboration of nitriles to give primary amines is reported. Good yields (48–95%) and chemoselectivity (e.g., ester, nitro, sulfone) were observed. DFT calculations and mechanistic studies support the proposal of a double B–N/B–H transborylation mechanism.

Hydroboration of isocyanates: cobalt-catalyzed vs. catalyst-free approaches

Hydroboration of isocyanates with HBPin was demonstrated using both catalytic and catalyst-free approaches. In arene solvents, the reactions employed the commercially available and bench-stable Co(acac)₂/dpephos (dpephos = bis[(2-diphenylphosphino)phenyl] ether) pre-catalyst and proved chemodivergent, showing the formation of either formamides or N-methylamines, depending on the concentration of HBPin and the reaction conditions used. Catalytic monohydroboration of isocyanates to formamides was found to be highly chemoselective, tolerating alkenes, alkynes, aryl halides, esters, carboxamides, nitriles, nitroarenes and heteroaromatic functionalities. The catalyst-free hydroboration reactions have been demonstrated in neat HBPin. Whereas monohydroboration proved less selective compared with Co(acac)₂/dpephos-catalyzed transformations, selective deoxygenative hydroboration of isocyanates to N-methylamines was observed under catalyst-free conditions.

A Boron-Nitrogen Double Transborylation Strategy for Borane-Catalyzed Hydroboration of Nitriles

Organoborane-catalyzed hydroboration of nitriles provides N,N-diborylamines, which act as efficient synthons for the synthesis of primary amines and secondary amides. Known nitrile hydroboration methods are dominated by metal catalysis. Simple and metal-free hydroboration of nitriles using diborane [H-B-9-BBN]₂ as a catalyst and pinacolborane as a turnover reagent is reported. The reaction of monomeric H-B-9-BBN with nitriles leads to the hydrido-bridged diborylimine intermediate; a subsequent sequential double hydroboration-transborylation pathway involving B-N/B-H σ bond metathesis is proposed.

Solvent-free Zn (NSNO) complex-catalysed dihydroboration of nitriles

N-donors are the most commonly employed Lewis bases in ligand-assisted catalysis. A dimeric zinc complex (Zn-1) employing a tetradentate pyridine-thioether-anilido-aryloxide NSNO ligand (L) effects the quantitative conversion of nitriles to the corresponding double hydroborated products at 1 mol% catalyst loading. Variable Time Normalization Analysis kinetic studies showed a first-order dependence with respect to the nitrile, pinacolborane and zinc and clear evidence for catalyst deactivation. A plausible ligand-assisted reaction pathway involves B-H bond activation by the aryloxide (vs. anilido) donor.

Applications of catalysis in hydroboration of imines, nitriles, and carbodiimides

The catalytic hydroboration of imines, nitriles, and carbodiimides is a powerful method of preparing amines which are key synthetic intermediates in the synthesis of many value-added products. Imine hydroboration has perennially featured in notable reports while nitrile and carbodiimide hydroboration have gained attention recently. Initial developments in catalytic hydroboration of imines and nitriles employed precious metals and typically required harsh reaction conditions. More recent advances have shifted toward the use of base metal and main group element catalysis and milder reaction conditions. In this survey, we review metal and nonmetal catalyzed hydroboration of these unsaturated organic molecules and group them into three distinct categories: precious metals, base metals, and main group catalysts. The TON and TOF of imine hydroboration catalysts are reported and summarized with a brief overview of recent advances in the field. Mechanistic and kinetic studies of some of these protocols are also presented.

Bicyclic (alkyl)(amino)carbene (BICAAC) as a metal-free catalyst for reduction of nitriles to amines

Bicyclic (alkyl)(amino)carbene (BICAAC) is introduced as a metal-free catalyst for the reduction of various nitriles to the corresponding amine hydrochloride salts in the presence of pinacolborane. Mechanistic investigations combining experiments and DFT calculations suggest a B-H addition to the carbene center, which acts as a carrier of the hydride source.

Aluminium complexes: next-generation catalysts for selective hydroboration

Organoboranes obtained from hydroboration reactions are one of the important classes of compounds that could be used to provide valuable synthons for follow-up transformations such as various functional group incorporation or C-C bond forming reactions. For decades, various transition metals were utilised as catalysts in such transformations. Recently Earth-abundant and less toxic main group metals have revived their importance in hydroboration chemistry, among which the suitable candidates are aluminium complexes as catalysts. In this regard, the development of aluminium complexes to achieve more robust catalytic systems with greater efficiency is appreciable.

N-Heterocyclic Carbene-Phosphinidenide Complexes as Hydroboration Catalysts

The reactions of the N-heterocyclic carbene-phosphinidene adducts (NHC)PSiMe₃ and (NHC)PH with the dinuclear ruthenium and osmium complexes [(η⁶-p-cymene)MCl₂]₂ (M = Ru, Os) afforded the half-sandwich complexes [(η⁶-p-cymene){(NHC)P}MCl] and [(η⁶-p-cymene){(NHC)PH}MCl₂] with two- and three-legged piano-stool geometries, respectively (NHC = IDipp, IMes; IDipp = 1,3-bis(2,6-diisopropylphenyl)imidazolin-2-ylidene; IMes = 1,3-bis(2,4,6-trimethylphenyl)imidazolin-2-ylidene). The complexes were initially tested as precatalysts for the hydroboration of benzonitrile, and the most active species, the ruthenium complex [(η⁶-p-cymene){(IMes)P}RuCl], was further used for the efficient hydroboration of a wide range (ca. 50 substrates) of nitriles, carboxylic esters, and carboxamides in neat pinacolborane (HBpin) under comparatively mild reaction conditions (60-80 °C, 3-5 mol % catalyst loading). Preliminary mechanistic and kinetic studies are reported, and stoichiometric reactions with HBpin indicate the initial formation of the monohydride complex [(η⁶-p-cymene){(IMes)P}RuH] as the putative catalytically active species.

Highly Selective Hydrogenative Conversion of Nitriles into Tertiary, Secondary, and Primary Amines under Flow Reaction Conditions

Flow reaction methods have been developed to selectively synthesize tertiary, secondary, and primary amines depending on heterogeneous platinum-group metal species under catalytic hydrogenation conditions using nitriles as starting materials. A 10 % Pd/C-packed catalyst cartridge affords symmetrically substituted tertiary amines in good to excellent yields. A 10 % Rh/C-packed catalyst cartridge enables the divergent synthesis of secondary and primary amines, with either cyclohexane or acetic acid as a solvent, respectively. Reaction parameters, such as the metal catalyst, solvent, and reaction temperature, and continuous-flow conditions, such as flow direction and second support of the catalyst in a catalyst cartridge, are quite important for controlling the reaction between the hydrogenation of nitriles and nucleophilic attack of in situ-generated amines to imine intermediates. A wide variety of aliphatic and aromatic nitriles could be highly selectively transformed into the corresponding tertiary, secondary, and primary amines by simply changing the metal species of the catalyst or flow parameters. Furthermore, the selective continuous-flow methodologies are applied over at least 72 h to afford three different types of amines in 80-99 % yield without decrease in catalytic activities.

Hydroelementation of diynes

This review highlights the hydroelementation reactions of conjugated and separated diynes, which depending on the process conditions, catalytic system, as well as the type of reagents, leads to the formation of various products: enynes, dienes, allenes, polymers, or cyclic compounds. The presence of two triple bonds in the diyne structure makes these compounds important reagents but selective product formation is often difficult owing to problems associated with maintaining appropriate reaction regio- and stereoselectivity. Herein we review this topic to gain knowledge on the reactivity of diynes and to systematise the range of information relating to their use in hydroelementation reactions. The review is divided according to the addition of the E-H (E = Mg, B, Al, Si, Ge, Sn, N, P, O, S, Se, Te) bond to the triple bond(s) in the diyne, as well as to the type of the reagent used, and the product formed. Not only are the hydroelementation reactions comprehensively discussed, but the synthetic potential of the obtained products is also presented. The majority of published research is included within this review, illustrating the potential as well as limitations of these processes, with the intent to showcase the power of these transformations and the obtained products in synthesis and materials chemistry.

Spin-state crossover in photo-catalyzed nitrile dihydroboration via Mn-thiolate cooperation

The role of a phosphine-free SNS-pincer ligand in metal–ligand cooperative hydroboration catalysis was investigated. The bifunctional thiolate donor and spin-state change to high-spin Mn are crucial to accessing low-energy activation barriers.

Manganese-Catalyzed Hydroborations with Broad Scope

Reductive transformations of easily available oxidized matter are at the heart of synthetic manipulation and chemical valorization. The applications of catalytic hydrofunctionalization benefit from the use of liquid reducing agents and operationally facile setups. Metal‐catalyzed hydroborations provide a highly prolific platform for reductive valorizations of stable C=X electrophiles. Here, we report an especially facile, broad‐scope reduction of various functions including carbonyls, carboxylates, pyridines, carbodiimides, and carbonates under very mild conditions with the inexpensive pre‐catalyst Mn(hmds)₂. The reaction could be successfully applied to depolymerizations.

Selective hydroboration of unsaturated bonds by an easily accessible heterotopic cobalt catalyst

Homogeneous earth-abundant metal catalysis based on well-defined molecular complexes has achieved great advance in synthetic methodologies. However, sophisticated ligand, hazardous activator and multistep synthesis starting from base metal salts are generally required for the generation of active molecular catalysts, which may hinder their broad application in large scale organic synthesis. Therefore, the development of metal cluster catalysts formed in situ from simple earth-abundant metal salts is of importance for the practical utilization of base metal resource, yet it is still in its infancy. Herein, a mixture of catalytic amounts of cobalt (II) iodide and potassium tert-butoxide is discovered to be highly active for selective hydroboration of vinylarenes and dihydroboration of nitriles, affording a good yield of diversified hydroboration products that without isolation can readily undergo further one pot transformations. It should be highlighted that the alkoxide-pinacolborane combination acts as an efficient activation strategy to activate cobalt (II) iodide for the generation of metastable heterotopic cobalt catalysts in situ, which is proposed to be catalytically active species.

Homogeneous earth-abundant metal catalysis based on well-defined metal complexes is of interest for organic synthesis, but typically employs expensive catalysts, air sensitive or synthetically challenging chemicals. Here, the authors report an efficient and regio-selective catalytic system for hydroboration of vinylarenes and organic nitriles with HBPin, using commercially available CoI₂ and KO^tBu under ligand-free conditions.

Zinc Hydride Catalyzed Chemoselective Hydroboration of Isocyanates: Amide Bond Formation and C=O Bond Cleavage

Herein, a remarkable conjugated bis-guanidinate (CBG) supported zinc hydride, [{LZnH}₂ ; L={(ArHN)(ArN)-C=N-C=(NAr)(NHAr); Ar=2,6-Et₂ -C₆ H₃ }] (I) catalyzed partial reduction of heteroallenes via hydroboration is reported. A large number of aryl and alkyl isocyanates, including electron-donating and withdrawing groups, undergo reduction to obtain selectively N-boryl formamide, bis(boryl) hemiaminal and N-boryl methyl amine products. The compound I effectively catalyzes the chemoselective reduction of various isocyanates, in which the construction of the amide bond occurs. Isocyanates undergo a deoxygenation hydroboration reaction, in which the C=O bond cleaves, leading to N-boryl methyl amines. Several functionalities such as nitro, cyano, halide, and alkene groups are well-tolerated. Furthermore, a series of kinetic, control experiments and structurally characterized intermediates suggest that the zinc hydride species are responsible for all reduction steps and breaking the C=O bond.

Iron-catalysed hydroboration of non-activated imines and nitriles: kinetic and mechanistic studies

Iron-catalysed hydroboration of imines and nitriles has been developed under low catalyst loading (1 mol%) in the presence of HBpin. A wide scope of substrate was found to smoothly undergo hydroboration, including electron releasing/withdrawing and halogen substitution patterns and cyclic substrates which all afforded the corresponding amines in good to excellent yields. Dihydroboration of nitriles was achieved conveniently under solvent free and additive free conditions. Promisingly, this catalytic system is also capable of the hydroboration of challenging ketimine substrates. Preliminary kinetic analysis of imine hydroboration reveals a first-order dependence on catalyst concentration. Both HBpin and 4-fluorophenyl-N-phenylmethanimine (1b) appear to exhibit saturation kinetics with first order dependence up to 0.5 mmol HBpin and 0.75 mmol imine, respectively. Temperature-dependent rate experiments for imine hydroboration have also been explored. Activation parameters for the hydroboration of FPhC[double bond, length as m-dash]NPh (1b) were determined from the Eyring and Arrhenius plots with ΔS ≠, ΔH ≠, and E a values of -28.69 (±0.3) e.u., 12.95 (±0.04) kcal mol-1, and 15.22 (±0.09) kcal mol-1, respectively.

Hydroboration of Nitriles, Esters, and Carbonates Catalyzed by Simple Earth-Abundant Metal Triflate Salts

During the past decade earth-abundant metals have become increasingly important in homogeneous catalysis. One of the reactions in which earth-abundant metals have found important applications is the hydroboration of unsaturated C-C and C-X bonds (X=O or N). Within these set of transformations, the hydroboration of challenging substrates such as nitriles, carbonates and esters still remain difficult and often relies on elaborate ligand designs and highly reactive catalysts (e. g., metal alkyls/hydrides). Here we report an effective methodology for the hydroboration of challenging C≡N and C=O bonds that is simple and applicable to a wide set of substrates. The methodology is based on using a manganese(II) triflate salt that, in combination with commercially available potassium tert-butoxide and pinacolborane, catalyzes the hydroboration of nitriles, carbonates, and esters at room temperature and with near quantitative yields in less than three hours. Additional studies demonstrated that other earth-abundant metal triflate salts can facilitate this reaction as well, which is further discussed in this report.

Asymmetric three-component olefin dicarbofunctionalization enabled by photoredox and copper dual catalysis

The intermolecular three-component alkene vicinal dicarbofunctionalization (DCF) reaction allows installation of two different carbon fragments. Despite extensive investigation into its ionic chemistry, the enantioseletive radical-mediated versions of DCF reactions remain largely unexplored. Herein, we report an intermolecular, enantioselective three-component radical vicinal dicarbofunctionalization reaction of olefins enabled by merger of radical addition and cross-coupling using photoredox and copper dual catalysis. Key to the success of this protocol relies on chemoselective addition of acyl and cyanoalkyl radicals, generated in situ from the redox-active oxime esters by a photocatalytic N-centered iminyl radical-triggered C-C bond cleavage event, onto the alkenes to form new carbon radicals. Single electron metalation of such newly formed carbon radicals to TMSCN-derived L1Cu(II)(CN)2 complex leads to asymmetric cross-coupling. This three-component process proceeds under mild conditions, and tolerates a diverse range of functionalities and synthetic handles, leading to valuable optically active β-cyano ketones and alkyldinitriles, respectively, in a highly enantioselective manner (>60 examples, up to 97% ee).

Hydroboration of nitriles and imines by highly active zinc dihydride catalysts

Eco-friendly zinc dihydrides stabilized by N-heterocyclic carbenes were demonstrated to be highly efficient catalysts for the double hydroboration of nitriles with pinacolborane, exhibiting turnover frequencies up to 3000 h⁻¹ at room temperature under solvent-free conditions. The reactions afforded corresponding diboronated amines with excellent yields and good functional group tolerance. A single Zn–H insertion product was isolated from a stoichiometric reaction of zinc dihydride with nitrile, and was proved to be an active species in this transformation. Kinetic studies were performed to give some insights into the catalytic reactions. In addition, zinc dihydride species also showed high activity for the hydroboration of imines to boronated amines.

Molecular zinc dihydrides were found to be highly efficient catalysts for the hydroboration of nitriles and imines at room temperature under solvent-free conditions.