Accessory protein function in the DNA polymerase III holoenzyme from E. coli

Out-of-plane motions in open sliding clamps: molecular dynamics simulations of eukaryotic and archaeal proliferating cell nuclear antigen

Sliding clamps are ring-like multimeric proteins that encircle duplex DNA and serve as mobile DNA-bound platforms that are essential for efficient DNA replication and repair. Sliding clamps are placed on DNA by clamp loader complexes, in which the clamp-interacting elements are organized in a right-handed spiral assembly. To understand how the flat, ring-like clamps might interact with the spiral interaction surface of the clamp loader complex, we have performed molecular dynamics simulations of sliding clamps (proliferating cell nuclear antigen from the budding yeast, humans, and an archaeal species) in which we have removed one of the three subunits so as to release the constraint of ring closure. The simulations reveal significant structural fluctuations corresponding to lateral opening and out-of-plane distortions of the clamp, which result principally from bending and twisting of the beta-sheets that span the intermolecular interfaces, with smaller but similar contributions from beta-sheets that span the intramolecular interfaces within each subunit. With the integrity of these beta-sheets intact, the predominant fluctuations seen in the simulations are oscillations between lateral openings and right-handed spirals. The tendency for clamps to adopt a right-handed spiral conformation implies that once opened, the conformation of the clamp can easily match the spiraling of clamp loader subunits, a feature that is intrinsic to the recognition of DNA and subsequent hydrolysis of ATP by the clamp-bound clamp loader complex.

Increased dNTP binding affinity reveals a nonprocessive role for Escherichia coli beta clamp with DNA polymerase IV

Replication forks often stall at undamaged or damaged template sites in Escherichia coli. Subsequent resumption of DNA synthesis occurs by replacing DNA polymerase III, which is bound to DNA by the beta-sliding clamp, with one of three damage-induced DNA polymerases II, IV, or V. The principal role of the beta clamp is to tether the normally weakly bound polmerases to DNA thereby increasing their processivities. DNA polymerase IV binds dNTP substrates with about 10-fold lower affinity compared with the other E. coli polymerases, which if left unchecked could hinder its ability to synthesize DNA in vivo. Here we report a new property for the beta clamp, which when bound to DNA polymerase IV results in a large increase in dNTP binding affinity that concomitantly increases the efficiency of nucleotide incorporation at normal and transiently slipped mispaired primer/template ends. Primer-template DNA slippage resulting in single nucleotide deletions is a biological hallmark of DNA polymerase IV infidelity responsible for enhancing cell fitness in response to stress. We show that the increased DNA polymerase IV-dNTP binding affinity is an intrinsic property of the DNA polymerase IV-beta clamp interaction and not an indirect consequence of an increased binding of DNA polymerase IV to DNA.

Replisome-mediated DNA replication

The elaborate process of genomic replication requires a large collection of proteins properly assembled at a DNA replication fork. Several decades of research on the bacterium Escherichia coli and its bacteriophages T4 and T7 have defined the roles of many proteins central to DNA replication. These three different prokaryotic replication systems use the same fundamental components for synthesis at a moving DNA replication fork even though the number and nature of some individual proteins are different and many lack extensive sequence homology. The components of the replication complex can be grouped into functional categories as follows: DNA polymerase, helix destabilizing protein, polymerase accessory factors, and primosome (DNA helicase and DNA primase activities). The replication of DNA derives from a multistep enzymatic pathway that features the assembly of accessory factors and polymerases into a functional holoenzyme; the separation of the double-stranded template DNA by helicase activity and its coupling to the primase synthesis of RNA primers to initiate Okazaki fragment synthesis; and the continuous and discontinuous synthesis of the leading and lagging daughter strands by the polymerases. This review summarizes and compares and contrasts for these three systems the types, timing, and mechanism of reactions and of protein-protein interactions required to initiate, control, and coordinate the synthesis of the leading and lagging strands at a DNA replication fork and comments on their generality.

The structure of supercoiled intermediates in DNA replication

We studied the structure of replication intermediates accumulated by Tus-induced arrest of plasmid DNA replication at termination sites. For intermediates generated both in vitro with purified components and in vivo, superhelical stress is distributed throughout the entire partially replicated molecule; daughter DNA segments are wound around each other, and the unreplicated region is supercoiled. Thus, unlinking of parental DNA strands by topoisomerases can be carried out both behind and in front of the replication fork. We explain why previous studies with prokaryotic and eukaryotic replication intermediates discerned only supercoiling in the unreplicated portion.

Suppressors of Escherichia coli mutT: antimutators for DNA replication errors

Previous studies in our laboratory used a papillation assay to identify a set of mutations in the E. coli dnaE gene that confer increased accuracy of DNA replication (antimutators). These antimutators were isolated as suppressors of the hugh mutability of a mismatch-repair-defective mutL strain, in which the majority of mutations represent uncorrected replication errors (mainly A.T --> G.C and G.C --> A.T transitions). In the present study, we have sought suppressors of the high mutability of a mutT mutator strain. mutT strains produce a high frequency of A.T --> C.G transversions due to their lack of the mutT-encoded 8-oxo-dGTPase, leading to a high frequency of A.(8-oxoG) mispairing errors. Following localized mutagenesis of the dnaE-dnaQ region of the chromosome, two strong suppressors of mutT mutability were obtained, both residing in the dnaE gene (dnaE940 and dnaE941). When subsequently tested in a mutL strain, these two alleles also proved antimutators in this background, dnaE941 being significantly stronger than the previously isolated antimutators. The results suggest that the DNA polymerase may use similar mechanisms to discriminate against A.(8-oxoG) transversion mispairs and A.C or T.G transition mispairs. The finding may also have significance for teh interpretation of the antimutator effect conferred by these dnaE alleles in a wild-type (mut+) background.

Assembly of a chromosomal replication machine: two DNA polymerases, a clamp loader, and sliding clamps in one holoenzyme particle. IV. ATP-binding site mutants identify the clamp loader

The gamma complex (gamma delta delta' chi psi) and tau complex (tau delta delta' chi psi) clamp loaders require ATP hydrolysis to load beta sliding clamps onto DNA. The beta sliding clamp tethers the polymerase (Pol) III* replicase to DNA for processive synthesis. Pol III* contains both gamma and tau, but only one each of the delta, delta', chi, and psi subunits. Hence, there is ambiguity with respect to which clamp loader, the gamma or tau complex, exists in the Pol III* replicase structure. In this study, ATP-binding site mutants of gamma and tau have been prepared, and these mutants, when assembled into either the gamma or tau complex, are inactive in clamp loading. These mutants have been used as a tool to determine the identity of the clamp loader in Pol III*. The nine-subunit Pol III* has been assembled using either mutant gamma or tau in place of wild-type gamma or tau. The results show that mutation of gamma inactivates Pol III* activity, but mutation of tau does not, indicating that the gamma complex (and not the tau complex) is the clamp loader of Pol III*. The tau subunit carries the task of dimerizing the core polymerase, and it is this association of tau with core that appears to direct the single copy subunits away from tau and onto gamma.

Assembly of a chromosomal replication machine: two DNA polymerases, a clamp loader, and sliding clamps in one holoenzyme particle. I. Organization of the clamp loader

The gamma complex of DNA polymerase III holoenzyme, the replicase of Escherichia coli, couples ATP hydrolysis to the loading of beta sliding clamps onto primed DNA. The beta sliding clamp tethers the holoenzyme replicase to DNA for rapid and processive synthesis. In this report, the gamma complex has been constituted from its five different subunits. Size measurements and subunit stoichiometry studies show a composition of gamma 2 delta 1 delta' 1 1 chi 1 psi 1. Strong intersubunit contacts have been identified by gel filtration, and weaker contacts were identified by surface plasmon resonance measurements. An analogous tau complex has also been constituted and characterized; it is nearly as active as the gamma complex in clamp loading activity, but as shown in the fourth report of this series, it is at a disadvantage in binding the delta, delta', chi, and psi subunits when core is present (Xiao, H., Naktinis, V., and O'Donnell, M. (1995) J. Biol. Chem. 270, 13378-13383). The single copy subunits within the gamma complex provide the basis for the structural asymmetry inherent within DNA polymerase III holoenzyme.

Assembly of a chromosomal replication machine: two DNA polymerases, a clamp loader, and sliding clamps in one holoenzyme particle. III. Interface between two polymerases and the clamp loader

The nine-subunit DNA polymerase (Pol) III* coupled to its beta sliding clamp is a rapid and highly processive replicating machine. The multiple subunits are needed for the complicated task of duplicating the Escherichia coli chromosome. In this report, Pol III* was constituted from individual pure proteins, and its structure was studied. Constitution of the Pol III* particle requires an ordered addition of the subunits, and the final structure contains 14 polypeptides in the ratio alpha 2 epsilon 2 theta 2 tau 2 gamma 2 delta 1 delta' 1 chi 1 psi 1. The structure can be summarized as being composed of two core polymerases (alpha epsilon theta) held together by a dimer of tau and one gamma complex clamp loader (gamma 2 delta 1 delta' 1 chi 1 psi 1) for loading beta onto DNA. At the center of the structure, the related tau and gamma subunits form a heterotetramer upon which the two core polymerases and clamp loader proteins assemble. The single copy nature of the delta, delta', chi, and psi subunits confers a structural asymmetry with respect to the two polymerases, presumably for the different functions of replicating the leading and lagging strands.

Cloning of the large subunit of activator 1 (replication factor C) reveals homology with bacterial DNA ligases

We have cloned a gene encoding a DNA-binding protein by Southwestern screening of a murine cDNA library with a double-stranded oligonucleotide containing the sequence from the bidirectional promoter of the alpha 1 and alpha 2 collagen IV genes. The middle portion of this 1131-amino acid protein has a region homologous to bacterial DNA ligases, and the more carboxyl portion contains several domains homologous to p40, p38, p37, and p36.5 subunits of activator 1 (A1, also called replication factor C), a human replication protein complex. Western blotting revealed that antiserum generated against part of the recombinant protein reacted specifically with the 145-kDa component of the purified human A1 complex, indicating that it is the murine counterpart of the A1 p145. Characterization of the DNA-binding activity of the recombinant fusion protein by gel mobility-shift assay revealed that it had a preference for a run of pyrimidines on one strand. Deletion analysis using recombinant proteins revealed that the DNA ligase-like domain was required for DNA-binding activity. The finding that the region required for the binding of murine A1 p145 to DNA has similarity to a domain found in DNA ligases suggests that this region may be utilized by both proteins in recognizing DNA.

Assembly of a functional replication complex without ATP hydrolysis: a direct interaction of bacteriophage T4 gp45 with T4 DNA polymerase

The seven-protein bacteriophage T4 DNA replication complex can be manipulated in vitro to study mechanistic aspects of the elongation phase of DNA replication. Under physiological conditions, the processivity of DNA synthesis catalyzed by the T4 polymerase (gp43) is greatly increased by the interaction of this enzyme with its accessory proteins (gp44/62 and gp45) and the T4 single-stranded DNA binding protein (gp32). The assembly of this T4 holoenzyme requires hydrolysis of ATP by the gp44/62 complex. We demonstrate here that processive T4 holoenzyme-like DNA synthesis can be obtained without hydrolysis of ATP by simply adding gp45 to the T4 DNA polymerase at extremely high concentrations, effectively bypassing the ATPase subunits (gp44/62) of the accessory protein complex. The amount of gp45 required for the gp43-gp45 heteroassociation event is reduced by addition of the macromolecular crowding agent polyethylene glycol (PEG) as well as gp32. A chromatographic strategy involving PEG has been used to demonstrate the gp43-gp45 interaction. These results suggest that gp45 is ultimately responsible for increasing the processivity of DNA synthesis via a direct and functionally significant interaction with the T4 DNA polymerase. A corollary to this notion is that the specific role of the gp44/62 complex is to catalytically link gp45 to gp43.