Nanosensor based approaches for quantitative detection of heparin

Heparin, being a widely employed anticoagulant in numerus clinical complications, requires strict quantification and qualitative screening to ensure the safety of patients from potential threat of thrombocytopenia. However, the intricacy of heparin's chemical structures and low abundance hinders the precise monitoring of its level and quality in clinical settings. Conventional laboratory assays have limitations in sensitivity and specificity, necessitating the development of innovative approaches. In this context, nanosensors emerged as a promising solution due to enhanced sensitivity, selectivity, and ability to detect heparin even at low concentrations. This review delves into a range of sensing approaches including colorimetric, fluorometric, surface-enhanced Raman spectroscopy, and electrochemical techniques using different types of nanomaterials, thus providing insights of its principles, capabilities, and limitations. Moreover, integration of smart-phone with nanosensors for point of care diagnostics has also been explored. Additionally, recent advances in nanopore technologies, artificial intelligence (AI) and machine learning (ML) have been discussed offering specificity against contaminants present in heparin to ensure its quality. By consolidating current knowledge and highlighting the potential of nanosensors, this review aims to contribute to the advancement of efficient, reliable, and economical heparin detection methods providing improved patient care.

A fluorescence nanoprobe of N-Acetyl-L-Cysteine capped CdTe QDs for sensitive detection of nitrofurazone

A method was established for detecting the content of nitrofurazone (NFZ) by fluorescence quenching of N-Acetyl-L-Cysteine (NAC) coated cadmium telluride quantum dots (CdTe QDs). By means of transmission electron microscopy (TEM) and multispectral methods such as fluorescence and ultraviolet visible spectra (UV-vis), the synthesized CdTe QDs were characterized. The quantum yield (φ) of CdTe QDs was measured as 0.33 by reference method. The CdTe QDs had a better stability, the RSD of fluorescence intensity was 1.51% in three months. NFZ quenching the emission light of CdTe QDs was observed. The analyses of Stern-Volmer and time-resolved fluorescence suggested the quenching was static. The binding constants (K_a) between NFZ and CdTe QDs were 1.14 × 10⁴ (293 K), 0.74 × 10⁴ (303 K) and 0.51 × 10⁴ (313 K) L mol^-1. The hydrogen bond or van der Waals force was the dominated binding force between NFZ and CdTe QDs. The interaction was further characterized by UV-vis absorption as well as Fourier transform infrared spectra (FT-IR). Using fluorescence quenching effect, a quantitative determination of NFZ was carried out. The optimal experimental conditions were studied and determined as following: pH was 7 and contact time was 10 min. The effects of reagent addition sequence, temperature and the foreign substances including some metals (Mg²⁺; Zn²⁺; Ca²⁺; K⁺; Cu²⁺), glucose, bovine serum albumin (BSA) and furazolidone on the determination were studied. There was a high correlation between the concentration of NFZ (0.40 - 39.63 μg mL^-1) and F₀/F with the standard curve F₀/F = 0.0262c + 0.9910 (r = 0.9994). The detection limit (LOD) reached 0.04 μg mL^-1 (3S₀/S). The contents of NFZ in beef and bacteriostatic liquid were detected. The recovery of NFZ was 95.13% - 103.03% and RSD was 0.66% - 1.37% (n = 5).

A Novel Turn on Fluorescence Sensor for Determination Enoxaparin, a Low Molecular Weight Heparin

A sensor system was designed for the detection of Enoxaparin (Enox), a low molecular weight heparin (LMWH) that was run over the fluorescence quenching mechanism of fluorescein (FL) dye. At nanomolar concentrations, FL probe was subjected to fluorescence quenching by Fe(III). Fluorescence quenching mechanism of FL by Fe(III) was examined using various analytical techniques such as UV-vis absorption, fluorescence, and Fourier transform Infrared spectroscopy techniques, as well as with scanning electron microscope. The results indicated that photoinduced electron transfer process occurred between FL and Fe and that FL was quenched both statically and dynamically. Thermodynamic parameters showed that the interactions between them were predominantly hydrophobic interactions. Enox caused FL to recover its lost fluorescence properties and an increase was observed in the intensity of the fluorescence. Enox was detected successfully with the turn on fluorescence sensor. The developed Enox biosensor exhibited linearity in the range of 0-1.1 μg/ml. For Enox detection, the limit of detection was measured as 255 ng/mL. Enox biosensor was presented as a practical, simple, and applicable sensor system with high sensitivity and good selectivity. Enox is a medication usually monitored indirectly over anticoagulation. This study was presented as an alternative method for monitoring Enox directly. HIGHLIGHTS: Fluorescence quenching of Fluorescein dye by Fe(III) was studied in detail. The presence of enoxaparin enhanced the fluorescence properties of the fluorescein dye. A sensitive, simple and effective sensor system for determination of Enoxaparin, a low molecular weight heparin was shaped in the aqueous media. It was presented as a new method for Enoxaparin to be followed directly.

Lost in (Clinical) Translation: Recent Advances in Heparin Neutralization and Monitoring

The heparin family, which includes unfractionated heparin, low-molecular heparin, and fondaparinux, is a class of drugs clinically used as intravenous blood thinners. To date, issues related to both the reversal of anticoagulation and the blood level determination of the anticoagulant at the point-of-care remain: while the only U.S. Food and Drug Administration (FDA) approved antidote for heparin displays serious efficacy and safety drawbacks, the current assays for heparin monitoring are indirect measurements subject to their own limitations and variations. Herein, we provide an update on the numerous recent chemical approaches to tackle these issues, from which it is clear that some new antidotes and sensors for heparin certainly have the potential to exceed current clinical standards. This review aims to review a field that requires close collaborations between physicians, biologists, and chemists in order to foster advances toward clinical translation.

Role of Emissive and Non-Emissive Complex Formations in Photoinduced Electron Transfer Reaction of CdTe Quantum Dots

Bimolecular photoinduced electron transfer (PET) from excited state CdTe quantum dot (QD*) to an electron deficient molecule 2,4-dinitrotoluene (DNT) is studied in toluene. We observed two types of QD-DNT complex formations; (i) non-emissive complex, in which DNT is embedded deep inside the surface polymer layer of QD and (ii) emissive complex, in which DNT molecules are attached to QDs but approach to the QD core is shielded by polymer layer. Because of its non-emissive nature, the lifetime of QD is not affected by dark complex formation, though the steady-state emission is greatly quenched. However, emissive complex formation causes both, lifetime and steady-state emission quenching. In our fitting model, consideration of Poisson distribution of the attached quencher (DNT) molecules at QD surface enables a comprehensive fitting to our time resolved data. QD-DNT complex formation was confirmed by an isothermal titration calorimetry (ITC) study. Fitting to the time resolved data using a stochastic kinetic model shows moderate increase (0.05 ns^-1 to 0.072 ns^-1 ) of intrinsic quenching rate with increasing the QD particle size (from ≈3.2 nm to ≈5.2 nm). Our fitting also reveals that the number of DNT molecules attached to a single QD increases from ≈0.1-0.2 to ≈1.2-1.7, as the DNT concentration is increased from ≈1 mm to 17.5 mm. Complex formation at higher quencher concentration assures that the observed PET kinetics is a thermodynamically controlled process where solvent diffusion has no role on it.

Simple and green synthesis of carbon dots (CDs) from valerian root and application of modified mesoporous boehmite (AlOOH) with CDs as a fluorescence probe for determination of imipramine

A novel, sensitive, rapid, and simple fluorescent probe has been developed based on green-synthesized carbon dots (CDs). In this work, CDs have been synthesized from valerian root by hydrothermal method. Transmission electron microscopy (TEM) and dynamic light scattering (DLS) results confirm the formation of CDs with sizes of less than 10 nm. Fluorescence quenching of CDs was due to the aggregation of the negative charges of CDs with the positive charge of imipramine (IMI) and was then used as the signal for determination of IMI. In addition, the cytotoxicity of CDs was determined using the MTT assay. The probe responses under optimum conditions were linear in the range of 1.0-200.0 ng mL^-1 with a limit of detection of 0.6 ng mL^-1. Afterwards, mesoporous boehmite (MB) was modified with synthesized CDs (CDs/MB). TEM images confirmed MB modification with CDs. In this case, the variations in the fluorescence signal for different concentrations of IMI increased leading to the higher sensitivity for IMI detection. The limit of detection and linear range for determination of IMI with CDs/MB were obtained as 0.2 and 0.5-200.0 ng mL^-1, respectively. To evaluate the fluorescent probe, IMI was measured in real samples. Graphical abstract.

Facile synthesis of near-infrared emitting dBSA-templated Cu nanoclusters for sensitive detection of heparin

The near-infrared emitting dBSA-Cu NCs were synthesized through a facile synthesis route and were applied for ultra-sensitive detection of heparin in human plasma.

Quantum dots-based fluorescence resonance energy transfer biosensor for monitoring cell apoptosis

The development of advanced methods for accurately monitoring cell apoptosis has extensive significance in the diagnostic and pharmaceutical fields. In this study, we developed a rapid, sensitive and selective approach for the detection of cell apoptosis by combining the site-specific recognition and cleavage of the DEVD-peptide with quantum dots (QDs)-based fluorescence resonance energy transfer (FRET). Firstly, biotin-peptide was conjugated on the surface of AuNPs to form AuNPs-pep through the formation of an Au-S bond. Then, AuNPs-pep-QDs nanoprobe was obtained through the connection between AuNPs-pep and QDs. FRET is on and the fluorescence of QDs is quenched at this point. The evidence of UV-vis spectra, transmission electron microscopy (TEM), and Fourier transform infrared (FT-IR) spectroscopy revealed that the connection was successful. Upon the addition of apoptosis cell lysis solution, peptide was cleaved by caspase-3, and AuNPs was dissociated from the QDs. At this time, FRET is off, and thus the QDs fluorescence was recovered. The experimental conditions were optimized in terms of ratio of peptide to AuNPs, buffer solution, and the temperature of conjugation and enzyme reaction. The biosensor was successfully applied to distinguishing apoptosis cells and normal cells within 2 h. This study demonstrated that the biosensor could be utilized to evaluate anticancer drugs.

SERS spectral study of HAuCl4-cysteine nanocatalytic reaction and its application for detection of heparin sodium with label-free VB4r molecular probe

In the presence of nanocatalyst, L-cysteine reduce HAuCl₄ rapidly to form gold nanoparticles (AuNP), and a quick nanocatalytic preparation procedure was established for Au/AuNP sol with highly active surface enhanced Raman scattering (SERS) effect and good stability. The nanoreaction was also studied by absorption, resonance Rayleigh scattering (RRS), transmission electron microscopy (TEM) and energy spectra. In the selected conditions, the analyte heparin sodium (HS) could react with victoria blue 4 R (VB4r) to form associated complexes which have very weak SERS effect to make the SERS signals decrease. The SERS signals at 1617 cm⁻¹ reduced linearly with HS concentration increasing. Upon addition of FeCl₃, it hydrolyzed to form stable Fe(OH)₃ sol platform that carried SERS active Au/AuNPs to enhance the sensitivity. Accordingly, we established a SERS quantitative analysis method in the sol substrate of Fe(OH)₃-Au/AuNPs, with a linear range of 0.5–75 ng/mL HS and a detection limit of 0.2 ng/mL. HS in real samples was determined, with a relative standard deviation of 2.65–7.63% and a recovery of 99.3–101%.

Fluorescent Strips of Electrospun Fibers for Ratiometric Sensing of Serum Heparin and Urine Trypsin

"Turn-on" or "turn-off" probes remain challenges in the establishment of sensitive, easily operated, and reliable methods for in situ monitoring bioactive substances. In the current study, electrospun fibrous strips are designed to provide straightforward observations of ratiometric color changes with the naked eye in the presence of serum heparin or urine trypsin. A tetraphenylethene (TPE) derivative is constructed and along with phloxine B is grafted on fibers, followed by protamine adsorption to induce static quenching of phloxine B and aggregation-induced emission of the TPE derivative. The presence of heparin or trypsin removes protamine to restore the fluorescence of phloxine B at 574 nm (I₅₇₄) and relieve the emission of the TPE derivative at 472 nm (I₄₇₂). The grafting densities of phloxine B and the TPE derivative are essential to achieve the optimal fluorescence-intensity ratio of I₅₇₄/I₄₇₂ for the ratiometric detection of heparin and trypsin. Under illumination by an ultraviolet lamp, the fibrous mats turn from cyan to green in the presence of heparin at 0.4 U/mL and to a bright yellow at 0.8 U/mL, which is feasible in sensing serum heparin levels during postoperative and long-term care of patients after cardiovascular surgery. The protamine digestion results in similar color transitions with increasing trypsin levels up to 8 μg/mL, indicating the potential for monitoring urine trypsin levels of pancreas transplant patients. The color strips based on the ratiometric fluorescent response indicate advantages in lowering the detection limit and improving the accuracy and reproducibility, bearing great potential for a real-time and naked-eye detection of bioactive substances as self-test devices.

Rapid and visual detection of heparin based on the disassembly of polyelectrolyte-induced pyrene excimers

A sensor based on polyelectrolyte-induced pyrene excimers has been developed for the visual detection of heparin with high sensitivity and selectivity.

Light up detection of heparin based on aggregation-induced emission and synergistic counter ion displacement

An easily accessible fluorescent light up probe HPQ-TBP-I is developed for sensitive and selective detection of heparin based on a synergistic strategy of aggregation-induced emission (AIE) and displacement of the fluorescence quencher iodide ion.