Biofuel production improvement with genome-scale models: The role of cell composition

Metabolic flux analysis for metabolome data validation of naturally xylose-fermenting yeasts

BACKGROUND

Efficient xylose fermentation still demands knowledge regarding xylose catabolism. In this study, metabolic flux analysis (MFA) and metabolomics were used to improve our understanding of xylose metabolism. Thus, a stoichiometric model was constructed to simulate the intracellular carbon flux and used to validate the metabolome data collected within xylose catabolic pathways of non-Saccharomyces xylose utilizing yeasts.

RESULTS

A metabolic flux model was constructed using xylose fermentation data from yeasts Scheffersomyces stipitis, Spathaspora arborariae, and Spathaspora passalidarum. In total, 39 intracellular metabolic reactions rates were utilized validating the measurements of 11 intracellular metabolites, acquired by mass spectrometry. Among them, 80% of total metabolites were confirmed with a correlation above 90% when compared to the stoichiometric model. Among the intracellular metabolites, fructose-6-phosphate, glucose-6-phosphate, ribulose-5-phosphate, and malate are validated in the three studied yeasts. However, the metabolites phosphoenolpyruvate and pyruvate could not be confirmed in any yeast. Finally, the three yeasts had the metabolic fluxes from xylose to ethanol compared. Xylose catabolism occurs at twice-higher flux rates in S. stipitis than S. passalidarum and S. arborariae. Besides, S. passalidarum present 1.5 times high flux rate in the xylose reductase reaction NADH-dependent than other two yeasts.

CONCLUSIONS

This study demonstrated a novel strategy for metabolome data validation and brought insights about naturally xylose-fermenting yeasts. S. stipitis and S. passalidarum showed respectively three and twice higher flux rates of XR with NADH cofactor, reducing the xylitol production when compared to S. arborariae. Besides then, the higher flux rates directed to pentose phosphate pathway (PPP) and glycolysis pathways resulted in better ethanol production in S. stipitis and S. passalidarum when compared to S. arborariae.

Amino acid catabolism-directed biofuel production in Clostridium sticklandii: An insight into model-driven systems engineering

•

Model-driven systems engineering has been more fascinating process for microbial biofuel production.

•

Clostridium sticklandii is a potential strain for the solventogenesis and acidogenesis.

•

The present review provides an insight for the protein catabolism-directed biofuel production.

Model-driven systems engineering has been more fascinating process for the microbial production of biofuel and bio-refineries in chemical and pharmaceutical industries. Genome-scale modeling and simulations have been guided for metabolic engineering of Clostridium species for the production of organic solvents and organic acids. Among them, Clostridium sticklandii is one of the potential organisms to be exploited as a microbial cell factory for biofuel production. It is a hyper-ammonia producing bacterium and is able to catabolize amino acids as important carbon and energy sources via Stickland reactions and the development of the specific pathways. Current genomic and metabolic aspects of this bacterium are comprehensively reviewed herein, which provided information for learning about protein catabolism-directed biofuel production. It has a metabolic potential to drive energy and direct solventogenesis as well as acidogenesis from protein catabolism. It produces by-products such as ethanol, acetate, n-butanol, n-butyrate and hydrogen from amino acid catabolism. Model-driven systems engineering of this organism would improve the performance of the industrial sectors and enhance the industrial economy by using protein-based waste in environment-friendly ways.

Plant Microbe Interactions in Post Genomic Era: Perspectives and Applications

Deciphering plant-microbe interactions is a promising aspect to understand the benefits and the pathogenic effect of microbes and crop improvement. The advancement in sequencing technologies and various 'omics' tool has impressively accelerated the research in biological sciences in this area. The recent and ongoing developments provide a unique approach to describing these intricate interactions and test hypotheses. In the present review, we discuss the role of plant-pathogen interaction in crop improvement. The plant innate immunity has always been an important aspect of research and leads to some interesting information like the adaptation of unique immune mechanisms of plants against pathogens. The development of new techniques in the post - genomic era has greatly enhanced our understanding of the regulation of plant defense mechanisms against pathogens. The present review also provides an overview of beneficial plant-microbe interactions with special reference to Agrobacterium tumefaciens-plant interactions where plant derived signal molecules and plant immune responses are important in pathogenicity and transformation efficiency. The construction of various Genome-scale metabolic models of microorganisms and plants presented a better understanding of all metabolic interactions activated during the interactions. This review also lists the emerging repertoire of phytopathogens and its impact on plant disease resistance. Outline of different aspects of plant-pathogen interactions is presented in this review to bridge the gap between plant microbial ecology and their immune responses.

Cyanobacterial Biofuels: Strategies and Developments on Network and Modeling

Cyanobacteria, the phototrophic microorganisms, have attracted much attention recently as a promising source for environmentally sustainable biofuels production. However, barriers for commercial markets of cyanobacteria-based biofuels concern the economic feasibility. Miscellaneous strategies for improving the production performance of cyanobacteria have thus been developed. Among these, the simple ad hoc strategies resulting in failure to optimize fully cell growth coupled with desired product yield are explored. With the advancement of genomics and systems biology, a new paradigm toward systems metabolic engineering has been recognized. In particular, a genome-scale metabolic network reconstruction and modeling is a crucial systems-based tool for whole-cell-wide investigation and prediction. In this review, the cyanobacterial genome-scale metabolic models, which offer a system-level understanding of cyanobacterial metabolism, are described. The main process of metabolic network reconstruction and modeling of cyanobacteria are summarized. Strategies and developments on genome-scale network and modeling through the systems metabolic engineering approach are advanced and employed for efficient cyanobacterial-based biofuels production.

Genome-scale modelling of microbial metabolism with temporal and spatial resolution

Most natural microbial systems have evolved to function in environments with temporal and spatial variations. A major limitation to understanding such complex systems is the lack of mathematical modelling frameworks that connect the genomes of individual species and temporal and spatial variations in the environment to system behaviour. The goal of this review is to introduce the emerging field of spatiotemporal metabolic modelling based on genome-scale reconstructions of microbial metabolism. The extension of flux balance analysis (FBA) to account for both temporal and spatial variations in the environment is termed spatiotemporal FBA (SFBA). Following a brief overview of FBA and its established dynamic extension, the SFBA problem is introduced and recent progress is described. Three case studies are reviewed to illustrate the current state-of-the-art and possible future research directions are outlined. The author posits that SFBA is the next frontier for microbial metabolic modelling and a rapid increase in methods development and system applications is anticipated.

Pareto Optimal Design for Synthetic Biology

Recent advances in synthetic biology call for robust, flexible and efficient in silico optimization methodologies. We present a Pareto design approach for the bi-level optimization problem associated to the overproduction of specific metabolites in Escherichia coli. Our method efficiently explores the high dimensional genetic manipulation space, finding a number of trade-offs between synthetic and biological objectives, hence furnishing a deeper biological insight to the addressed problem and important results for industrial purposes. We demonstrate the computational capabilities of our Pareto-oriented approach comparing it with state-of-the-art heuristics in the overproduction problems of i) 1,4-butanediol, ii) myristoyl-CoA, i ii) malonyl-CoA , iv) acetate and v) succinate. We show that our algorithms are able to gracefully adapt and scale to more complex models and more biologically-relevant simulations of the genetic manipulations allowed. The Results obtained for 1,4-butanediol overproduction significantly outperform results previously obtained, in terms of 1,4-butanediol to biomass formation ratio and knock-out costs. In particular overproduction percentage is of +662.7%, from 1.425 mmolh⁻¹gDW⁻¹ (wild type) to 10.869 mmolh⁻¹gDW⁻¹, with a knockout cost of 6. Whereas, Pareto-optimal designs we have found in fatty acid optimizations strictly dominate the ones obtained by the other methodologies, e.g., biomass and myristoyl-CoA exportation improvement of +21.43% (0.17 h⁻¹) and +5.19% (1.62 mmolh⁻¹gDW⁻¹), respectively. Furthermore CPU time required by our heuristic approach is more than halved. Finally we implement pathway oriented sensitivity analysis, epsilon-dominance analysis and robustness analysis to enhance our biological understanding of the problem and to improve the optimization algorithm capabilities.

Genome-scale models of plant metabolism

A genome-scale model (GSM) is an in silico metabolic model comprising hundreds or thousands of chemical reactions that constitute the metabolic inventory of a cell, tissue, or organism. A complete, accurate GSM, in conjunction with a simulation technique such as flux balance analysis (FBA), can be used to comprehensively predict cellular metabolic flux distributions for a given genotype and given environmental conditions. Apart from enabling a user to quantitatively visualize carbon flow through metabolic pathways, these flux predictions also facilitate the hypothesis of new network properties. By simulating the impacts of environmental stresses or genetic interventions on metabolism, GSMs can aid the formulation of nontrivial metabolic engineering strategies. GSMs for plants and other eukaryotes are significantly more complicated than those for prokaryotes due to their extensive compartmentalization and size. The reconstruction of a GSM involves creating an initial model, curating the model, and then rendering the model ready for FBA. Model reconstruction involves obtaining organism-specific reactions from the annotated genome sequence or organism-specific databases. Model curation involves determining metabolite protonation status or charge, ensuring that reactions are stoichiometrically balanced, assigning reactions to appropriate subcellular compartments, deleting generic reactions or creating specific versions of them, linking dead-end metabolites, and filling of pathway gaps to complete the model. Subsequently, the model requires the addition of transport, exchange, and biomass synthesis reactions to make it FBA-ready. This cycle of editing, refining, and curation has to be performed iteratively to obtain an accurate model. This chapter outlines the reconstruction and curation of GSMs with a focus on models of plant metabolism.

Semi-automated curation of metabolic models via flux balance analysis: a case study with Mycoplasma gallisepticum

Primarily used for metabolic engineering and synthetic biology, genome-scale metabolic modeling shows tremendous potential as a tool for fundamental research and curation of metabolism. Through a novel integration of flux balance analysis and genetic algorithms, a strategy to curate metabolic networks and facilitate identification of metabolic pathways that may not be directly inferable solely from genome annotation was developed. Specifically, metabolites involved in unknown reactions can be determined, and potentially erroneous pathways can be identified. The procedure developed allows for new fundamental insight into metabolism, as well as acting as a semi-automated curation methodology for genome-scale metabolic modeling. To validate the methodology, a genome-scale metabolic model for the bacterium Mycoplasma gallisepticum was created. Several reactions not predicted by the genome annotation were postulated and validated via the literature. The model predicted an average growth rate of 0.358±0.12, closely matching the experimentally determined growth rate of M. gallisepticum of 0.244±0.03. This work presents a powerful algorithm for facilitating the identification and curation of previously known and new metabolic pathways, as well as presenting the first genome-scale reconstruction of M. gallisepticum.

Flux balance analysis (FBA) is a powerful approach for genome-scale metabolic modeling. It provides metabolic engineers with a tool for manipulating, predicting, and optimizing metabolism for biotechnological and biomedical purposes. However, we posit that it can also be used as tool for fundamental research in understanding and curating metabolic networks. Specifically, by using a genetic algorithm integrated with FBA, we developed a curation approach to identify missing reactions, incomplete reactions, and erroneous reactions. Additionally, it was possible to take advantage of the ensemble information from the genetic algorithm to identify the most critical reactions for curation. We tested our strategy using Mycoplasma gallisepticum as our model organism. Using the genome annotation as the basis, the preliminary genome-scale metabolic model consisted of 446 metabolites involved in 380 reactions. Carrying out our analysis, we found over 80 incorrect reactions and 16 missing reactions. Based upon the guidance of the algorithm, we were able to curate and resolve all discrepancies. The model predicted an average bacterial growth rate of 0.358±0.12 h⁻¹ compared to the experimentally observed 0.244±0.03 h⁻¹. Thus, our approach facilitated the curation of a genome-scale metabolic network and generated a high quality metabolic model.

Redirector: designing cell factories by reconstructing the metabolic objective

Advances in computational metabolic optimization are required to realize the full potential of new in vivo metabolic engineering technologies by bridging the gap between computational design and strain development. We present Redirector, a new Flux Balance Analysis-based framework for identifying engineering targets to optimize metabolite production in complex pathways. Previous optimization frameworks have modeled metabolic alterations as directly controlling fluxes by setting particular flux bounds. Redirector develops a more biologically relevant approach, modeling metabolic alterations as changes in the balance of metabolic objectives in the system. This framework iteratively selects enzyme targets, adds the associated reaction fluxes to the metabolic objective, thereby incentivizing flux towards the production of a metabolite of interest. These adjustments to the objective act in competition with cellular growth and represent up-regulation and down-regulation of enzyme mediated reactions. Using the iAF1260 E. coli metabolic network model for optimization of fatty acid production as a test case, Redirector generates designs with as many as 39 simultaneous and 111 unique engineering targets. These designs discover proven in vivo targets, novel supporting pathways and relevant interdependencies, many of which cannot be predicted by other methods. Redirector is available as open and free software, scalable to computational resources, and powerful enough to find all known enzyme targets for fatty acid production.

A deeper understanding of biological processes, along with methods in synthetic biology, is driving the frontier of metabolic engineering. In particular, a better representation of cell metabolism will enable the engineering of bacterial strains that can act as factories for valuable biochemical products, from medicines to biofuels. Models which predict the behavior of these complex biological systems enable better engineering design as well as a more comprehensive understanding of fundamental biological principles. Here we develop a new method, called Redirector, for modeling metabolic alterations, and their relationship to cell growth. This method optimizes genetic engineering changes to achieve metabolite production using a new representation of the metabolic impact of genetic manipulation, which is more biologically realistic than existing models. We discover proven and novel engineering targets to improve fatty acid production, correctly predicting how different combinations of genes build upon one another. This work demonstrates that Redirector is a powerful method for designing cell factories and improving our understanding of metabolic systems.

Resolving cell composition through simple measurements, genome-scale modeling, and a genetic algorithm

The biochemical composition of a cell is very complex and dynamic. It varies greatly among different organisms and environmental conditions. Inclusion of proper cell composition data is critical for accurate genome-scale metabolic flux modeling using flux balance analysis (FBA). However, determining cell composition experimentally is currently time-consuming and resource intensive. In this chapter, a method for predicting cell composition using a genome-scale model and "easy to measure" culture data (e.g., glucose uptake rate, and specific growth rate) is presented. The method makes use of a genetic algorithm for nonlinear optimization of a biomass equation (a mathematical description of cell composition). As a case study, the method was used to optimize a biomass equation for Escherichia coli MG1655 under multiple growth environments. The availability of experimentally determined (13)C flux data allowed a direct comparison with FBA predicted fluxes through the TCA cycle. Results showed dramatic improvement upon optimization of the biomass equation. In a second case study, biomass equation optimization was also applied to Clostridium acetobutylicum, an organism with less available biochemical cell composition data in the literature. The method produced a biomass equation highly similar to one determined experimentally for the closely related Gram-positive Bacillus subtilis.

Are we ready for genome-scale modeling in plants?

As it is becoming easier and faster to generate various types of high-throughput data, one would expect that by now we should have a comprehensive systems-level understanding of biology, biochemistry, and physiology at least in major prokaryotic and eukaryotic model systems. Despite the wealth of available data, we only get a glimpse of what is going on at the molecular level from the global perspective. The major reason is the high level of cellular complexity and our limited ability to identify all (or at least important) components and their interactions in virtually infinite number of internal and external conditions. Metabolism can be modeled mathematically by the use of genome-scale models (GEMs). GEMs are in silico metabolic flux models derived from available genome annotation. These models predict the combination of flux values of a defined metabolic network given the influence of internal and external signals. GEMs have been successfully implemented to model bacterial metabolism for over a decade. However, it was not until 2009 when the first GEM for Arabidopsis thaliana cell-suspension cultures was generated. Genome-scale modeling ("GEMing") in plants brings new challenges primarily due to the missing components and complexity of plant cells represented by the existence of: (i) photosynthesis; (ii) compartmentation; (iii) variety of cell and tissue types; and (iv) diverse metabolic responses to environmental and developmental cues as well as pathogens, insects, and competing weeds. This review presents a critical discussion of the advantages of existing plant GEMs, while identifies key targets for future improvements. Plant GEMs tend to be accurate in predicting qualitative changes in selected aspects of central carbon metabolism, while secondary metabolism is largely neglected mainly due to the missing (unknown) genes and metabolites. As such, these models are suitable for exploring metabolism in plants grown in favorable conditions, but not in field-grown plants that have to cope with environmental changes in complex ecosystems. AraGEM is the first GEM describing a photosynthetic and photorespiring plant cell (Arabidopsis thaliana). We demonstrate the use of AraGEM given the current (limited) knowledge of plant metabolism and reveal the unexpected robustness of AraGEM by a series of in silico simulations. The major focus of these simulations is on the assessment of the: (i) network connectivity; (ii) influence of CO₂ and photon uptake rates on cellular growth rates and production of individual biomass components; and (iii) stability of plant central carbon metabolism with internal pH changes.

Genome-scale modeling using flux ratio constraints to enable metabolic engineering of clostridial metabolism in silico

BACKGROUND

Genome-scale metabolic networks and flux models are an effective platform for linking an organism genotype to its phenotype. However, few modeling approaches offer predictive capabilities to evaluate potential metabolic engineering strategies in silico.

RESULTS

A new method called "flux balance analysis with flux ratios (FBrAtio)" was developed in this research and applied to a new genome-scale model of Clostridium acetobutylicum ATCC 824 (iCAC490) that contains 707 metabolites and 794 reactions. FBrAtio was used to model wild-type metabolism and metabolically engineered strains of C. acetobutylicum where only flux ratio constraints and thermodynamic reversibility of reactions were required. The FBrAtio approach allowed solutions to be found through standard linear programming. Five flux ratio constraints were required to achieve a qualitative picture of wild-type metabolism for C. acetobutylicum for the production of: (i) acetate, (ii) lactate, (iii) butyrate, (iv) acetone, (v) butanol, (vi) ethanol, (vii) CO2 and (viii) H2. Results of this simulation study coincide with published experimental results and show the knockdown of the acetoacetyl-CoA transferase increases butanol to acetone selectivity, while the simultaneous over-expression of the aldehyde/alcohol dehydrogenase greatly increases ethanol production.

CONCLUSIONS

FBrAtio is a promising new method for constraining genome-scale models using internal flux ratios. The method was effective for modeling wild-type and engineered strains of C. acetobutylicum.

The evolution of metabolic networks of E. coli

Background

Despite the availability of numerous complete genome sequences from E. coli strains, published genome-scale metabolic models exist only for two commensal E. coli strains. These models have proven useful for many applications, such as engineering strains for desired product formation, and we sought to explore how constructing and evaluating additional metabolic models for E. coli strains could enhance these efforts.

Results

We used the genomic information from 16 E. coli strains to generate an E. coli pangenome metabolic network by evaluating their collective 76,990 ORFs. Each of these ORFs was assigned to one of 17,647 ortholog groups including ORFs associated with reactions in the most recent metabolic model for E. coli K-12. For orthologous groups that contain an ORF already represented in the MG1655 model, the gene to protein to reaction associations represented in this model could then be easily propagated to other E. coli strain models. All remaining orthologous groups were evaluated to see if new metabolic reactions could be added to generate a pangenome-scale metabolic model (iEco1712_pan). The pangenome model included reactions from a metabolic model update for E. coli K-12 MG1655 (iEco1339_MG1655) and enabled development of five additional strain-specific genome-scale metabolic models. These additional models include a second K-12 strain (iEco1335_W3110) and four pathogenic strains (two enterohemorrhagic E. coli O157:H7 and two uropathogens). When compared to the E. coli K-12 models, the metabolic models for the enterohemorrhagic (iEco1344_EDL933 and iEco1345_Sakai) and uropathogenic strains (iEco1288_CFT073 and iEco1301_UTI89) contained numerous lineage-specific gene and reaction differences. All six E. coli models were evaluated by comparing model predictions to carbon source utilization measurements under aerobic and anaerobic conditions, and to batch growth profiles in minimal media with 0.2% (w/v) glucose. An ancestral genome-scale metabolic model based on conserved ortholog groups in all 16 E. coli genomes was also constructed, reflecting the conserved ancestral core of E. coli metabolism (iEco1053_core). Comparative analysis of all six strain-specific E. coli models revealed that some of the pathogenic E. coli strains possess reactions in their metabolic networks enabling higher biomass yields on glucose. Finally the lineage-specific metabolic traits were compared to the ancestral core model predictions to derive new insight into the evolution of metabolism within this species.

Conclusion

Our findings demonstrate that a pangenome-scale metabolic model can be used to rapidly construct additional E. coli strain-specific models, and that quantitative models of different strains of E. coli can accurately predict strain-specific phenotypes. Such pangenome and strain-specific models can be further used to engineer metabolic phenotypes of interest, such as designing new industrial E. coli strains.

Dynamic flux balance modeling of S. cerevisiae and E. coli co-cultures for efficient consumption of glucose/xylose mixtures

Current researches into the production of biochemicals from lignocellulosic feedstocks are focused on the identification and engineering of individual microbes that utilize complex sugar mixtures. Microbial consortia represent an alternative approach that has the potential to better exploit individual species capabilities for substrate uptake and biochemical production. In this work, we construct and experimentally validate a dynamic flux balance model of a Saccharomyces cerevisiae and Escherichia coli co-culture designed for efficient aerobic consumption of glucose/xylose mixtures. Each microbe is a substrate specialist, with wild-type S. cerevisiae consuming only glucose and engineered E. coli strain ZSC113 consuming only xylose, to avoid diauxic growth commonly observed in individual microbes. Following experimental identification of a common pH and temperature for optimal co-culture batch growth, we demonstrate that pure culture models developed for optimal growth conditions can be adapted to the suboptimal, common growth condition by adjustment of the non-growth associated ATP maintenance of each microbe. By comparing pure culture model predictions to co-culture experimental data, the inhibitory effect of ethanol produced by S. cerevisiae on E. coli growth was found to be the only interaction necessary to include in the co-culture model to generate accurate batch profile predictions. Co-culture model utility was demonstrated by predicting initial cell concentrations that yield simultaneous glucose and xylose exhaustion for different sugar mixtures. Successful experimental validation of the model predictions demonstrated that steady-state metabolic reconstructions developed for individual microbes can be adapted to develop dynamic flux balance models of microbial consortia for the production of renewable chemicals.

Engineering of microorganisms for the production of biofuels and perspectives based on systems metabolic engineering approaches

The increasing oil price and environmental concerns caused by the use of fossil fuel have renewed our interest in utilizing biomass as a sustainable resource for the production of biofuel. It is however essential to develop high performance microbes that are capable of producing biofuels with very high efficiency in order to compete with the fossil fuel. Recently, the strategies for developing microbial strains by systems metabolic engineering, which can be considered as metabolic engineering integrated with systems biology and synthetic biology, have been developed. Systems metabolic engineering allows successful development of microbes that are capable of producing several different biofuels including bioethanol, biobutanol, alkane, and biodiesel, and even hydrogen. In this review, the approaches employed to develop efficient biofuel producers by metabolic engineering and systems metabolic engineering approaches are reviewed with relevant example cases. It is expected that systems metabolic engineering will be employed as an essential strategy for the development of microbial strains for industrial applications.

Prospects for microbial biodiesel production

As the demand for biofuels for transportation is increasing, it is necessary to develop technologies that will allow for low-cost production of biodiesel. Conventional biodiesel is mainly produced from vegetable oil by chemical transesterification. This production, however, has relatively low land-yield and is competing for agricultural land that can be used for food production. Therefore, there is an increasing interest in developing microbial fermentation processes for production of biodiesel as this will allow for the use of a wide range of raw-materials, including sugar cane, corn, and biomass. Production of biodiesel by microbial fermentation can be divided into two different approaches, (1) indirect biodiesel production from oleaginous microbes by in vitro transesterification, and (2) direct biodiesel production from redesigned cell factories. This work reviews both microbial approaches for renewable biodiesel production and evaluates the existing challenges in these two strategies.

Whole-genome metabolic network reconstruction and constraint-based modeling

With the advent of modern high-throughput genomics, there is a significant need for genome-scale analysis techniques that can assist in complex systems analysis. Metabolic genome-scale network reconstructions (GENREs) paired with constraint-based modeling are an efficient method to integrate genomics, transcriptomics, and proteomics to conduct organism-specific analysis. This text explains key steps in the GENRE construction process and several methods of constraint-based modeling that can help elucidate basic life processes and development of disease treatment, bioenergy solutions, and industrial bioproduction applications.

Resolving the TCA cycle and pentose-phosphate pathway of Clostridium acetobutylicum ATCC 824: Isotopomer analysis, in vitro activities and expression analysis

Solventogenic clostridia are an important class of microorganisms that can produce various biofuels. One of the bottlenecks in engineering clostridia stems from the fact that central metabolic pathways remain poorly understood. Here, we utilized the power of (13) C-based isotopomer analysis to re-examine central metabolic pathways of Clostridium acetobutylicum ATCC 824. We demonstrate using [1,2-(13) C]glucose, MS analysis of intracellular metabolites, and enzymatic assays that C. acetobutylicum has a split TCA cycle where only Re-citrate synthase (CS) contributes to the production of α-ketoglutarate via citrate. Furthermore, we show that there is no carbon exchange between α-ketoglutarate and fumarate and that the oxidative pentose-phosphate pathway (oxPPP) is inactive. Dynamic gene expression analysis of the putative Re-CS gene (CAC0970), its operon, and all glycolysis, pentose-phosphate pathway, and TCA cycle genes identify genes and their degree of involvement in these core pathways that support the powerful primary metabolism of this industrial organism.