On-chip cell culture on a microarray of extracellular matrix with surface modification of poly(dimethylsiloxane)

Biofunctionalized patterned platform as microarray biochip to supervise delivery and expression of pDNA nanolipoplexes in stem cells via mechanotransduction

Biochips are widely applied to manipulate the geometrical morphology of stem cells in recent years. Patterned antenna-like pseudopodia are also probed to explore the influence of pseudopodia formation on gene delivery and expression on biochips. However, how the antenna-like pseudopodia affect gene transfection is unsettled and the underlying trafficking mechanism of exogenous genes in engineered single cells is not announced. Therefore, the engineered microarray biochips were conceptualized and prepared by the synthesized photointelligent biopolymer to precisely manage geometric topological structures (cell size and antenna-like protrusion) of stem cells on biochips. The cytoskeleton could be regulated in engineered cells and large cells with more antennas assembled well-organized actin filaments to affect cell tension distribution. The stiffness and adhesion force were measured by atomic force microscope to reveal cell nanomechanics on microarray biochips. Cytoskeleton-mediated nanomechanics could be adjusted by actin filaments. Gene transfection efficiency was enhanced with increasing cell nanomechanics, which was also confirmed by the evaluation of cell internalization capacity of nanoparticles and DNA synthesis ability. This work will provide a new strategy to study functional biomaterials, microarray chips and internal mechanism of gene transfection in patterned stem cells on biochips.

Accelerated construction of an in vitro model of human periodontal ligament tissue: vacuum plasma combined with fibronectin coating and a polydimethylsiloxane matrix

Tying shape memory wires to crowded teeth causes the wires to deform according to the dental arch. This deformation results in a resilient force that is delivered to the tooth. The appropriate amount of force can activate the osteogenetic and osteoclastic ability of the periodontal ligament (PDL) and the tooth can be moved. This is the biological basis of orthodontic treatment. To achieve further insight into the mechanisms underlying orthodontic treatment, we examined whether accelerated construction of an in vitro human PDL fibroblast (HPdLF) stretching model can be achieved by combining fibronectin coating and vacuum plasma treatment with polydimethylsiloxane (PDMS) cell-culture chambers. Each chamber was randomly assigned to a no-surface modification (NN), fibronectin coating (FN), vacuum plasma treatment (PN), or vacuum plasma treatment followed by a fibronectin coating (PF) treatment protocol. The physical and chemical features and ability to promote cellular proliferation of the PDMS chamber surfaces were evaluated. Cellular adhesion of four materials were evaluated and two best-proliferated groups were considered as better model-constructing surfaces and used in subsequent experiments and used in subsequent experiments. HPdLFs were cultured on these two kinds of chambers without stretching for 3 days, then with stretching for 7 days. Time-course gene expression cellular morphology were evaluated. Chambers in the PN group had high wettability and surface component changes. The FN and PF chambers had high cellular proliferation ability. They were selected into subsequent experiments. After 3 days of culturing HPdLFs on the PF and PN chambers, the cells in the PF chambers had significantly higher levels of runt-related transcription factor 2 (Runx-2) and osteocalcin (OCN) gene expression compared with the cells in the PN chambers. After cyclic stretch application to the cells in the PN and PF chambers, expression of the type-3 collagen (COL-3) gene in PF group continued to increase for 7 days and was significantly higher than that in the PN group from day 5 onwards. The HPdLFs in the PF group showed parallel alignment from days 3 to 7 after imposition of cyclic stretch, while those in the PN group aligned in parallel from day 5 on. Our results suggested that applying a fibronectin coating to a PDMS chamber after plasma treatment can accelerate establishment of an in vitro PDL stretching model.

The Evolution of Polystyrene as a Cell Culture Material

Polystyrene (PS) has brought in vitro cell culture from its humble beginnings to the modern era, propelling dozens of research fields along the way. This review discusses the development of the material, fabrication, and treatment approaches to create the culture material. However, native PS surfaces poorly facilitate cell adhesion and growth in vitro. To overcome this, liquid surface deposition, energetic plasma activation, and emerging functionalization methods transform the surface chemistry. This review seeks to highlight the many potential applications of the first widely accepted polymer growth surface. Although the majority of in vitro research occurs on two-dimensional surfaces, the importance of three-dimensional (3D) culture models cannot be overlooked. The methods to transition PS to specialized 3D culture surfaces are also reviewed. Specifically, casting, electrospinning, 3D printing, and microcarrier approaches to shift PS to a 3D culture surface are highlighted. The breadth of applications of the material makes it impossible to highlight every use, but the aim remains to demonstrate the versatility and potential as both a general and custom cell culture surface. The review concludes with emerging scaffolding approaches and, based on the findings, presents our insights on the future steps for PS as a tissue culture platform.

Protein and cell patterning in closed polymer channels by photoimmobilizing proteins on photografted poly(ethylene glycol) diacrylate

Definable surface chemistry is essential for many applications of microfluidic polymer systems. However, small cross-section channels with a high surface to volume ratio enhance passive adsorption of molecules that depletes active molecules in solution and contaminates the channel surface. Here, we present a one-step photochemical process to coat the inner surfaces of closed microfluidic channels with a nanometer thick layer of poly(ethylene glycol) (PEG), well known to strongly reduce non-specific adsorption, using only commercially available reagents in an aqueous environment. The coating consists of PEG diacrylate (PEGDA) covalently grafted to polymer surfaces via UV light activation of the water soluble photoinitiator benzoyl benzylamine, a benzophenone derivative. The PEGDA coating was shown to efficiently limit the adsorption of antibodies and other proteins to <5% of the adsorbed amount on uncoated polymer surfaces. The coating could also efficiently suppress the adhesion of mammalian cells as demonstrated using the HT-29 cancer cell line. In a subsequent equivalent process step, protein in aqueous solution could be anchored onto the PEGDA coating in spatially defined patterns with a resolution of <15 μm using an inverted microscope as a projection lithography system. Surface patterns of the cell binding protein fibronectin were photochemically defined inside a closed microfluidic device that was initially homogeneously coated by PEGDA. The resulting fibronectin patterns were shown to greatly improve cell adhesion compared to unexposed areas. This method opens for easy surface modification of closed microfluidic systems through combining a low protein binding PEG-based coating with spatially defined protein patterns of interest.

Microfluidic perfusion culture

Microfluidic perfusion culture is a novel technique to culture animal cells in a small-scale microchamber with medium perfusion. Polydimethylsiloxane (PDMS) is the most popular material to fabricate a microfluidic perfusion culture chip. Photolithography and replica molding techniques are generally used for fabrication of a microfluidic perfusion culture chip. Pressure-driven perfusion culture system is convenient technique to carry out the perfusion culture of animal cells in a microfluidic device. Here, we describe a general theory on microfluid network design, microfabrication technique, and experimental technique for pressure-driven perfusion culture in an 8 × 8 microchamber array on a glass slide-sized microchip made out of PDMS.

Technology advancement for integrative stem cell analyses

Scientists have endeavored to use stem cells for a variety of applications ranging from basic science research to translational medicine. Population-based characterization of such stem cells, while providing an important foundation to further development, often disregard the heterogeneity inherent among individual constituents within a given population. The population-based analysis and characterization of stem cells and the problems associated with such a blanket approach only underscore the need for the development of new analytical technology. In this article, we review current stem cell analytical technologies, along with the advantages and disadvantages of each, followed by applications of these technologies in the field of stem cells. Furthermore, while recent advances in micro/nano technology have led to a growth in the stem cell analytical field, underlying architectural concepts allow only for a vertical analytical approach, in which different desirable parameters are obtained from multiple individual experiments and there are many technical challenges that limit vertically integrated analytical tools. Therefore, we propose--by introducing a concept of vertical and horizontal approach--that there is the need of adequate methods to the integration of information, such that multiple descriptive parameters from a stem cell can be obtained from a single experiment.

Scaffold fabrication in a perfusion culture microchamber array chip by O(2) plasma bonding of poly(dimethylsiloxane) protected by a physical mask

Extracellular matrix (ECM) proteins are required for cell culture. In this paper, we report the use of O(2) plasma bonding to fabricate a perfusion culture microchamber array chip with identical-size ECM spots in the isolated microchambers. The chip was fabricated by assembly of two poly(dimethylsiloxane) (PDMS) layers, a microfluidic network layer, and an ECM array layer, which were aligned and then bonded by O(2) plasma oxidation with protection of the ECM microarray with a physical mask made from PDMS. We successfully cultivated Chinese hamster ovary K1 cells in the microchambers with fibronectin. In the fibronectin microchambers, the cells adhered and extended after 12 h of static culture and then grew over the course of 1 d of perfusion culture.

Miniaturized lensless imaging systems for cell and microorganism visualization in point-of-care testing

Low-cost, robust, and user-friendly diagnostic capabilities at the point-of-care (POC) are critical for treating infectious diseases and preventing their spread in developing countries. Recent advances in micro- and nanoscale technologies have enabled the merger of optical and fluidic technologies (optofluidics) paving the way for cost-effective lensless imaging and diagnosis for POC testing in resource-limited settings. Applications of the emerging lensless imaging technologies include detecting and counting cells of interest, which allows rapid and affordable diagnostic decisions. This review presents the advances in lensless imaging and diagnostic systems, and their potential clinical applications in developing countries. The emerging technologies are reviewed from a POC perspective considering cost effectiveness, portability, sensitivity, throughput and ease of use for resource-limited settings.

Microenvironment array chip for cell culture environment screening

We have developed a microarray of cell culture environments composed of a combination of soluble factors and extracellular matrices for screening of cell culture environment.