Indigenous microalgae strains characterization for a sustainable biodiesel production

Bicarbonate concentration influences carbon utilization rates and biochemical profiles of freshwater and marine microalgae

Selecting the optimal microalgal strain for carbon capture and biomass production is crucial for ensuring the commercial viability of microalgae-based biorefinery processes. This study aimed to evaluate the impact of varying bicarbonate concentrations on the growth rates, inorganic carbon (IC) utilization, and biochemical composition of three freshwater and two marine microalgal species. Parachlorella kessleri, Vischeria cf. stellata, and Porphyridium purpureum achieved the highest carbon removal efficiency (>85%) and biomass production at 6 g L-1 sodium bicarbonate (NaHCO3), while Phaeodactylum tricornutum showed optimal performance at 1 g L-1 NaHCO3. The growth and carbon removal rate of Scenedesmus quadricauda increased with increasing NaHCO3 concentrations, although its highest carbon removal efficiency (∼70%) was lower than the other species. Varying NaHCO3 levels significantly impacted the biochemical composition of P. kessleri, S. quadricauda, and P. purpureum but did not affect the composition of the remaining species. The fatty acid profiles of the microalgae were dominated by C16 and C18 fatty acids, with P. purpureum and P. tricornutum yielding relatively high polyunsaturated fatty acid content ranging between 14% and 30%. Furthermore, bicarbonate concentration had a species-specific effect on the fatty acid and chlorophyll-a content. This study demonstrates the potential of bicarbonate as an effective IC source for microalgal cultivation, highlighting its ability to select microalgal species for various applications based on their carbon capture efficiency and biochemical composition.

Extraction, separation and purification of fatty acid ethyl esters for biodiesel and DHA from Thraustochytrid biomass

A novel approach for in situ transesterification, extraction, separation, and purification of fatty acid ethyl esters (FAEE) for biodiesel and docosahexaenoic acid (DHA) from Thraustochytrid biomass has been developed. The downstream processing of Thraustochytrids oil necessitates optimization, considering the higher content of polyunsaturated fatty acids (PUFA). While two-step methods are commonly employed for extracting and transesterifying oil from oleaginous microbes, this may result in oxidation/epoxidation of omega-3 oil due to prolonged exposure to heat and oxygen. To address this issue, a rapid single-step method was devised for in situ transesterification of Thraustochytrid oil. Through further process optimization, a 50% reduction in solvent requirement was achieved without significantly impacting fatty acid recovery or composition. Scale-up studies in a 4 L reactor demonstrated complete FAEE recovery (99.98% of total oil) from biomass, concurrently enhancing DHA yield from 16% to nearly 22%. The decolorization of FAEE oil with fuller's earth effectively removed impurities such as pigments, secondary metabolites, and waxes, resulting in a clear, shiny appearance. High-performance liquid chromatography (HPLC) analysis indicated that the eluted DHA was over 94.5% pure, as corroborated by GC-FID analysis.