Electron microscopy of functional ribosome complexes

Nanoscale structural features determined by AFM for single virus particles

In this work, we propose "single-image analysis", as opposed to multi-image averaging, for extracting valuable information from AFM images of single bio-particles. This approach allows us to study molecular systems imaged by AFM under general circumstances without restrictions on their structural forms. As feature exhibition is a resolution correlation, we have performed AFM imaging on surfaces of tobacco mosaic virus (TMV) to demonstrate variations of structural patterns with probing resolution. Two AFM images were acquired with the same tip at different probing resolutions in terms of pixel width, i.e., 1.95 and 0.49 nm per pixel. For assessment, we have constructed an in silico topograph based on the three-dimensional crystal structure of TMV as a reference. The prominent artifacts observed in the AFM-determined shape of TMV were attributed to tip convolutions. The width of TMV rod was systematically overestimated by ~10 nm at both probing resolutions of AFM. Nevertheless, the effects of tip convolution were less severe in vertical orientation so that the estimated height of TMV by AFM imaging was in close agreement with the in silico X-ray topograph. Using dedicated image processing algorithms, we found that at low resolution (i.e., 1.95 nm per pixel), the extracted surface features of TMV can be interpreted as a partial or full helical repeat (three complete turns with ~7.0 nm in length), while individual protein subunits (~2.5 nm) were perceivable only at high resolution. The present study shows that the scales of revealed structural features in AFM images are subject to both probing resolution and processing algorithms for image analysis.

Gorgon and pathwalking: macromolecular modeling tools for subnanometer resolution density maps

The complex interplay of proteins and other molecules, often in the form of large transitory assemblies, are critical to cellular function. Today, X-ray crystallography and electron cryo-microscopy (cryo-EM) are routinely used to image these macromolecular complexes, though often at limited resolutions. Despite the rapidly growing number of macromolecular structures, few tools exist for modeling and annotating structures in the range of 3-10 Å resolution. To address this need, we have developed a number of utilities specifically targeting subnanometer resolution density maps. As part of the 2010 Cryo-EM Modeling Challenge, we demonstrated two of our latest de novo modeling tools, Pathwalking and Gorgon, as well as a tool for secondary structure identification (SSEHunter) and a new rigid-body/flexible fitting tool in Gorgon. In total, we submitted 30 structural models from ten different subnanometer resolution data sets in four of the six challenge categories. Each of our utlities produced accurate structural models and annotations across the various density maps. In the end, the utilities that we present here offer users a robust toolkit for analyzing and modeling protein structure in macromolecular assemblies at non-atomic resolutions.

Brownian dynamics study of the association between the 70S ribosome and elongation factor G

Protein synthesis on the ribosome involves a number of external protein factors that bind at its functional sites. One key factor is the elongation factor G (EF-G) that facilitates the translocation of transfer RNAs between their binding sites, as well as advancement of the messenger RNA by one codon. The details of the EF-G/ribosome diffusional encounter and EF-G association pathway still remain unanswered. Here, we applied Brownian dynamics methodology to study bimolecular association in the bacterial EF-G/70S ribosome system. We estimated the EF-G association rate constants at 150 and 300 mM monovalent ionic strengths and obtained reasonable agreement with kinetic experiments. We have also elucidated the details of EF-G/ribosome association paths and found that positioning of the L11 protein of the large ribosomal subunit is likely crucial for EF-G entry to its binding site.

Simulating activity of the bacterial ribosome

Computational modeling studies that investigate activity of the bacterial ribosome were reviewed. Computational approaches became possible with the availability of three-dimensional atomic resolution structures of the ribosomal subunits. However, due to the enormous size of the system, theoretical efforts to study the ribosome are few and challenging. For example, to extend the simulation timescales to biologically relevant ones, often, reduced models that require tedious parameterizations need to be applied. To that end, modeling of the ribosome focused on its internal dynamics, electrostatic properties, inhibition by antibiotics, polypeptide folding in the ribosome tunnel and assembly mechanisms driving the formation of the small ribosomal subunit.

Elbow flexibility of the kt38 RNA kink-turn motif investigated by free-energy molecular dynamics simulations

Kink-turns (K-turns) are common structural motifs that can introduce sharp kinks into double-stranded RNA, and have been proposed to mediate large-scale motions in the ribosome. K-turns consist of a bulge loop region flanked by trans sugar-Hoogsteen G:A pairs, and the sharp kink conformation is stabilized by A-minor interactions (adenine contacting a G:C basepair in the minor groove). Umbrella-sampling molecular dynamics simulations were used to disrupt an A-minor interaction in the ribosomal kt38 turn and to calculate the associated free-energy change. Coupling of umbrella sampling with replica exchanges between neighboring umbrella-sampling intervals could further improve the convergence of the free-energy calculations. The simulations revealed a coupled A-minor disruption and global opening of the K-turn motif, and allowed us to characterize several intermediate A-minor conformations. The calculated free-energy profile indicated a meta-stable, semi-open structure of slightly higher free energy ( approximately 1 kcal mol(-1)), separated by a small free-energy barrier ( approximately 1.5 kcal mol(-1)) from the closed (highly kinked) form. Both K-turn states are stabilized by distinct variants of the A-minor interaction. Further opening of the K-turn structure required significantly larger free-energy changes. The semi-open form had a reduced kink angle compatible with experimental data on K-turn solution structures, and opening was coupled to a continuous global unwinding of the K-turn motif. The range of free-energy changes associated with kt38 opening and unwinding are compatible with the idea that K-turns may facilitate biologically relevant motions during large-scale ribosome dynamics.

The molecular basis of translational control

Our current understanding of eukaryotic protein synthesis has emerged from many years of biochemical, genetic and biophysical approaches. Significant insight into the molecular details of the mechanism has been obtained, although there are clearly many aspects of the process that remain to be resolved. Importantly, our understanding of the mechanism has identified a number of key stages in the pathway that contribute to the regulation of general and gene-specific translation. Not surprisingly, translational control is now widely accepted to play a role in aspects of cell stress, growth, development, synaptic function, aging, and disease. This chapter reviews the mechanism of eukaryotic protein synthesis and its relevance to translational control.

Simulation and analysis of single-ribosome translation

In the cell, proteins are synthesized by ribosomes in a multi-step process called translation. The ribosome translocates along the messenger RNA to read the codons that encode the amino acid sequence of a protein. Elongation factors, including EF-G and EF-Tu, are used to catalyze the process. Recently, we have shown that translation can be followed at the single-molecule level using optical tweezers; this technique allows us to study the kinetics of translation by measuring the lifetime the ribosome spends at each codon. Here, we analyze the data from single-molecule experiments and fit the data with simple kinetic models. We also simulate the translation kinetics based on a multi-step mechanism from ensemble kinetic measurements. The mean lifetimes from the simulation were consistent with our experimental single-molecule measurements. We found that the calculated lifetime distributions were fit in general by equations with up to five rate-determining steps. Two rate-determining steps were only obtained at low concentrations of elongation factors. These analyses can be used to design new single-molecule experiments to better understand the kinetics and mechanism of translation.

Structural information, resolution, and noise in high-resolution atomic force microscopy topographs

AFM has developed into a powerful tool in structural biology, providing topographs of proteins under close-to-native conditions and featuring an outstanding signal/noise ratio. However, the imaging mechanism exhibits particularities: fast and slow scan axis represent two independent image acquisition axes. Additionally, unknown tip geometry and tip-sample interaction render the contrast transfer function nondefinable. Hence, the interpretation of AFM topographs remained difficult. How can noise and distortions present in AFM images be quantified? How does the number of molecule topographs merged influence the structural information provided by averages? What is the resolution of topographs? Here, we find that in high-resolution AFM topographs, many molecule images are only slightly disturbed by noise, distortions, and tip-sample interactions. To identify these high-quality particles, we propose a selection criterion based on the internal symmetry of the imaged protein. We introduce a novel feature-based resolution analysis and show that AFM topographs of different proteins contain structural information beginning at different resolution thresholds: 10 A (AqpZ), 12 A (AQP0), 13 A (AQP2), and 20 A (light-harvesting-complex-2). Importantly, we highlight that the best single-molecule images are more accurate molecular representations than ensemble averages, because averaging downsizes the z-dimension and "blurs" structural details.

The eukaryotic ribosome: current status and challenges

Despite having been identified first, their greater degree of complexity has resulted in our understanding of eukaryotic ribosomes lagging behind that of their bacterial and archaeal counterparts. A much more complicated biogenesis program results in ribosomes that are structurally, biochemically, and functionally more complex. However, recent advances in molecular genetics and structural biology are helping to reveal the intricacies of the eukaryotic ribosome and to address many longstanding questions regarding its many roles in the regulation of gene expression.

Flexible fitting of atomic structures into electron microscopy maps using molecular dynamics

A novel method to flexibly fit atomic structures into electron microscopy (EM) maps using molecular dynamics simulations is presented. The simulations incorporate the EM data as an external potential added to the molecular dynamics force field, allowing all internal features present in the EM map to be used in the fitting process, while the model remains fully flexible and stereochemically correct. The molecular dynamics flexible fitting (MDFF) method is validated for available crystal structures of protein and RNA in different conformations; measures to assess and monitor the fitting process are introduced. The MDFF method is then used to obtain high-resolution structures of the E. coli ribosome in different functional states imaged by cryo-EM.

Ribosome performance is enhanced by a rich cluster of pseudouridines in the A-site finger region of the large subunit

The large subunit rRNA in eukaryotes contains an unusually dense cluster of 8-10 pseudouridine (Psi) modifications located in a three-helix structure (H37-H39) implicated in several functions. This region is dominated by a long flexible helix (H38) known as the "A-site finger" (ASF). The ASF protrudes from the large subunit just above the A-site of tRNA binding, interacts with 5 S rRNA and tRNA, and through the terminal loop, forms a bridge (B1a) with the small subunit. In yeast, the three-helix domain contains 10 Psis and 6 are concentrated in the ASF helix (3 of the ASF Psis are conserved among eukaryotes). Here, we show by genetic depletion analysis that the Psis in the ASF helix and adjoining helices are not crucial for cell viability; however, their presence notably enhances ribosome fitness. Depleting different combinations of Psis suggest that the modification pattern is important and revealed that loss of multiple Psis negatively influences ribosome performance. The effects observed include slower cell growth (reduced rates up to 23% at 30 degrees C and 40-50% at 37 degrees C and 11 degrees C), reduced level of the large subunit (up to 17%), impaired polysome formation (appearance of half-mers), reduced translation activity (up to 20% at 30 degrees C and 25% at 11 degrees C), and increased sensitivity to ribosome-based drugs. The results indicate that the Psis in the three-helix region improve fitness of a eukaryotic ribosome.

Following translation by single ribosomes one codon at a time

We have followed individual ribosomes as they translate single messenger RNA hairpins tethered by the ends to optical tweezers. Here we reveal that translation occurs through successive translocation--and-pause cycles. The distribution of pause lengths, with a median of 2.8 s, indicates that at least two rate-determining processes control each pause. Each translocation step measures three bases--one codon-and occurs in less than 0.1 s. Analysis of the times required for translocation reveals, surprisingly, that there are three substeps in each step. Pause lengths, and thus the overall rate of translation, depend on the secondary structure of the mRNA; the applied force destabilizes secondary structure and decreases pause durations, but does not affect translocation times. Translocation and RNA unwinding are strictly coupled ribosomal functions.

Elastic properties of ribosomal RNA building blocks: molecular dynamics of the GTPase-associated center rRNA

Explicit solvent molecular dynamics (MD) was used to describe the intrinsic flexibility of the helix 42–44 portion of the 23S rRNA (abbreviated as Kt-42+rGAC; kink-turn 42 and GTPase-associated center rRNA). The bottom part of this molecule consists of alternating rigid and flexible segments. The first flexible segment (Hinge1) is the highly anharmonic kink of Kt-42. The second one (Hinge2) is localized at the junction between helix 42 and helices 43/44. The rigid segments are the two arms of helix 42 flanking the kink. The whole molecule ends up with compact helices 43/44 (Head) which appear to be modestly compressed towards the subunit in the Haloarcula marismortui X-ray structure. Overall, the helix 42–44 rRNA is constructed as a sophisticated intrinsically flexible anisotropic molecular limb. The leading flexibility modes include bending at the hinges and twisting. The Head shows visible internal conformational plasticity, stemming from an intricate set of base pairing patterns including dynamical triads and tetrads. In summary, we demonstrate how rRNA building blocks with contrasting intrinsic flexibilities can form larger architectures with highly specific patterns of preferred low-energy motions and geometries.

RNABC: forward kinematics to reduce all-atom steric clashes in RNA backbone

Although accurate details in RNA structure are of great importance for understanding RNA function, the backbone conformation is difficult to determine, and most existing RNA structures show serious steric clashes (>or= 0.4 A overlap) when hydrogen atoms are taken into account. We have developed a program called RNABC (RNA Backbone Correction) that performs local perturbations to search for alternative conformations that avoid those steric clashes or other local geometry problems. Its input is an all-atom coordinate file for an RNA crystal structure (usually from the MolProbity web service), with problem areas specified. RNABC rebuilds a suite (the unit from sugar to sugar) by anchoring the phosphorus and base positions, which are clearest in crystallographic electron density, and reconstructing the other atoms using forward kinematics. Geometric parameters are constrained within user-specified tolerance of canonical or original values, and torsion angles are constrained to ranges defined through empirical database analyses. Several optimizations reduce the time required to search the many possible conformations. The output results are clustered and presented to the user, who can choose whether to accept one of the alternative conformations. Two test evaluations show the effectiveness of RNABC, first on the S-motifs from 42 RNA structures, and second on the worst problem suites (clusters of bad clashes, or serious sugar pucker outliers) in 25 unrelated RNA structures. Among the 101 S-motifs, 88 had diagnosed problems, and RNABC produced clash-free conformations with acceptable geometry for 71 of those (about 80%). For the 154 worst problem suites, RNABC proposed alternative conformations for 72. All but 8 of those were judged acceptable after examining electron density (where available) and local conformation. Thus, even for these worst cases, nearly half the time RNABC suggested corrections suitable to initiate further crystallographic refinement. The program is available from http://kinemage.biochem.duke.edu .

Structures of the bacterial ribosome at 3.5 A resolution

We describe two structures of the intact bacterial ribosome from Escherichia coli determined to a resolution of 3.5 angstroms by x-ray crystallography. These structures provide a detailed view of the interface between the small and large ribosomal subunits and the conformation of the peptidyl transferase center in the context of the intact ribosome. Differences between the two ribosomes reveal a high degree of flexibility between the head and the rest of the small subunit. Swiveling of the head of the small subunit observed in the present structures, coupled to the ratchet-like motion of the two subunits observed previously, suggests a mechanism for the final movements of messenger RNA (mRNA) and transfer RNAs (tRNAs) during translocation.

Structural and functional analysis of 5S rRNA in Saccharomyces cerevisiae

5S rRNA extends from the central protuberance of the large ribosomal subunit, through the A-site finger, and down to the GTPase-associated center. Here, we present a structure-function analysis of seven 5S rRNA alleles which are sufficient for viability in the yeast Saccharomyces cerevisiae when expressed in the absence of wild-type 5S rRNAs, and extend this analysis using a large bank of mutant alleles that show semi-dominant phenotypes in the presence of wild-type 5S rRNA. This analysis supports the hypothesis that 5S rRNA serves to link together several different functional centers of the ribosome. Data are also presented which suggest that in eukaryotic genomes selection has favored the maintenance of multiple alleles of 5S rRNA, and that these may provide cells with a mechanism to post-transcriptionally regulate gene expression.

Introduction to 3D reconstruction of macromolecules using single particle electron microscopy

Single-particle electron microscopy has now reached maturity, becoming a commonly used method in the examination of macromolecular structure. Using a small amount of purified protein, isolated molecules are observed under the electron microscope and the data collected can be averaged into a 3D reconstruction. Single-particle electron microscopy is an appropriate tool for the analysis of proteins that can only be obtained in modest quantities, like many of the large complexes currently of interest in biomedicine. Whilst the use of electron microscopy expands, new methods are being developed and improved to deal with further challenges, such as reaching higher resolutions and the combination of information at different levels of structural detail. More importantly, present methodology is still not robust enough when studying certain tricky proteins like those displaying extensive conformational flexibility and a great deal of user expertise is required, posing a threat to the consistency of the final structure. This mini review describes a brief outline of the methods currently used in the 3D analysis of macromolecules using single-particle electron microscopy, intended for those first approaching this field. A summary of methods, techniques, software, and some recent work is presented. The spectacular improvements to the technique in recent years, its advantages and limitations compared to other structural methods, and its future developments are discussed.

RNA Structure: Reading the Ribosome

The crystal structures of the ribosome and its subunits have increased the amount of information about RNA structure by about two orders of magnitude. This is leading to an understanding of the principles of RNA folding and of the molecular interactions that underlie the functional capabilities of the ribosome and other RNA systems. Nearly all of the possible types of RNA tertiary interactions have been found in ribosomal RNA. One of these, an abundant tertiary structural motif called the A-minor interaction, has been shown to participate in both aminoacyl-transfer RNA selection and in peptidyl transferase; it may also play an important role in the structural dynamics of the ribosome.

Mechanical studies of single ribosome/mRNA complexes

Methodology was developed for specifically anchoring Escherichia coli 70S ribosomes onto a chemically modified, cysteine-reactive glass surface. Immobilized ribosomes maintain the capability of binding a polyuridylic acid (poly(U)) template, enabling investigation of mechanical properties of individual ribosome-poly(U) complexes using laser tweezers. Streptavidin-coated polystyrene microspheres bound specifically to the biotinylated 3' end of long (up to 10,000 bases) poly(U) strands. A novel optical method was built to control the position of the laser trap along the microscope optical axis at 2 nm resolution, facilitating measurement of the force-extension relationship for poly(U). Some immobilized ribosome-poly(U) complexes supported 100 pN of force applied at the 3' end of the mRNA. Binding of N-acetylated Phe-tRNA(Phe), an analog of the initiator fMet-tRNA(Met), enhanced the population of complexes that could withstand high forces. The persistence length of poly(U) RNA homopolymer, modeled as a worm-like chain, was found to be 0.79 +/- 0.05 nm and the backbone elasticity was 900 +/- 140 pN, similar to values for single-stranded DNA.

Drugs targeting the ribosome

Several classes of clinically important antibiotics target the bacterial ribosome, where they interfere with microbial protein synthesis. Structural studies of the interaction of antibiotics with the ribosome have revealed that these small molecules recognize predominantly the rRNA components. Over the past two years, three-dimensional structures of ribosome-antibiotic complexes have been determined, providing a detailed picture of the binding sites and mechanism of action of antibacterials, including 'blockbuster' drugs such as the macrolides. Structure-based approaches have come to fruition that comprise the design and crystal structure analysis of novel semi-synthetic antibiotics that target the ribosome decoding site.

Initiation of protein synthesis in bacteria

Valuable information on translation initiation is available from biochemical data and recently solved structures. We present a detailed description of current knowledge about the structure, function, and interactions of the individual components involved in bacterial translation initiation. The first section describes the ribosomal features relevant to the initiation process. Subsequent sections describe the structure, function, and interactions of the mRNA, the initiator tRNA, and the initiation factors IF1, IF2, and IF3. Finally, we provide an overview of mechanisms of regulation of the translation initiation event. Translation occurs on ribonucleoprotein complexes called ribosomes. The ribosome is composed of a large subunit and a small subunit that hold the activities of peptidyltransfer and decode the triplet code of the mRNA, respectively. Translation initiation is promoted by IF1, IF2, and IF3, which mediate base pairing of the initiator tRNA anticodon to the mRNA initiation codon located in the ribosomal P-site. The mechanism of translation initiation differs for canonical and leaderless mRNAs, since the latter is dependent on the relative level of the initiation factors. Regulation of translation occurs primarily in the initiation phase. Secondary structures at the mRNA ribosomal binding site (RBS) inhibit translation initiation. The accessibility of the RBS is regulated by temperature and binding of small metabolites, proteins, or antisense RNAs. The future challenge is to obtain atomic-resolution structures of complete initiation complexes in order to understand the mechanism of translation initiation in molecular detail.

A structural model of the vacuolar ATPase from transmission electron microscopy

Vacuolar ATPases (V-ATPases) are large, membrane bound, multisubunit protein complexes which function as ATP hydrolysis driven proton pumps. V-ATPases and related enzymes are found in the endomembrane system of eukaryotic organsims, the plasma membrane of specialized cells in higher eukaryotes, and the plasma membrane of prokaryotes. The proton pumping action of the vacuolar ATPase is involved in a variety of vital intra- and inter-cellular processes such as receptor mediated endocytosis, protein trafficking, active transport of metabolites, homeostasis and neurotransmitter release. This review summarizes recent progress in the structure determination of the vacuolar ATPase focusing on studies by transmission electron microscopy. A model of the subunit architecture of the vacuolar ATPase is presented which is based on the electron microscopic images and the available information from genetic, biochemical and biophysical experiments.

Hinge-like motions in RNA kink-turns: the role of the second a-minor motif and nominally unpaired bases

Kink-turn (K-turn) motifs are asymmetric internal loops found at conserved positions in diverse RNAs, with sharp bends in phosphodiester backbones producing V-shaped structures. Explicit-solvent molecular dynamics simulations were carried out for three K-turns from 23S rRNA, i.e., Kt-38 located at the base of the A-site finger, Kt-42 located at the base of the L7/L12 stalk, and Kt-58 located in domain III, and for the K-turn of human U4 snRNA. The simulations reveal hinge-like K-turn motions on the nanosecond timescale. The first conserved A-minor interaction between the K-turn stems is entirely stable in all simulations. The angle between the helical arms of Kt-38 and Kt-42 is regulated by local variations of the second A-minor (type I) interaction between the stems. Its variability ranges from closed geometries to open ones stabilized by insertion of long-residency waters between adenine and cytosine. The simulated A-minor geometries fully agree with x-ray data. Kt-58 and Kt-U4 exhibit similar elbow-like motions caused by conformational change of the adenosine from the nominally unpaired region. Despite the observed substantial dynamics of K-turns, key tertiary interactions are stable and no sign of unfolding is seen. We suggest that some K-turns are flexible elements mediating large-scale ribosomal motions during the protein synthesis cycle.

Normal mode-based fitting of atomic structure into electron density maps: application to sarcoplasmic reticulum Ca-ATPase

A method for the flexible docking of high-resolution atomic structures into lower resolution densities derived from electron microscopy is presented. The atomic structure is deformed by an iterative process using combinations of normal modes to obtain the best fit of the electron microscopical density. The quality of the computed structures has been evaluated by several techniques borrowed from crystallography. Two atomic structures of the SERCA1 Ca-ATPase corresponding to different conformations were used as a starting point to fit the electron density corresponding to a different conformation. The fitted models have been compared to published models obtained by rigid domain docking, and their relation to the known crystallographic structures are explored by normal mode analysis. We find that only a few number of modes contribute significantly to the transition. The associated motions involve almost exclusively rotation and translation of the cytoplasmic domains as well as displacement of cytoplasmic loops. We suggest that the movements of the cytoplasmic domains are driven by the conformational change that occurs between nonphosphorylated and phosphorylated intermediate, the latter being mimicked by the presence of vanadate at the phosphorylation site in the electron microscopy structure.

Testing the conservation of the translational machinery over evolution in diverse environments: assaying Thermus thermophilus ribosomes and initiation factors in a coupled transcription-translation system from Escherichia coli

Ribosomes from the extreme thermophile Thermus thermophilus are capable of translation in a coupled transcription-translation system derived from Escherichia coli. At 45 degrees C, T.thermophilus ribosomes translate at approximately 25-30% of the maximal rate of E.coli ribosomes, and synthesize full-length protein. T.thermophilus and E.coli subunits can be combined to effect translation, with the spectrum of proteins produced depending upon the source of the 30S subunit. In this system, T.thermophilus ribosomes function in concert with E.coli translational factors and tRNAs, with elongation and release factors being supplied from the E.coli extract, and purified initiation factors (IFs) being added exogenously. Cloned and purified T.thermophilus IF1, IF2 and IF3 supported the synthesis of the same products in vitro as the E.coli factors, although the relative levels of some polypeptides were factor dependent. We conclude that, at least between these two phylogenetically distant species, translational factor function and subunit-subunit interactions are conserved. This functional compatibility is remarkable given the extreme and highly divergent environments to which these species have adapted.

Mechanisms of elongation on the ribosome: dynamics of a macromolecular machine

Protein synthesis in the cell is performed on ribosomes, large ribonucleoprotein particles, which in bacteria consist of three RNA molecules and over 50 proteins. This review summarizes recent progress in understanding the mechanisms of the elongation phase of protein synthesis. Results from rapid kinetic analysis of elongation reactions are discussed in the light of recent structural data.

Ribosome motions modulate electrostatic properties

The electrostatic properties of the 70S ribosome of Thermus thermophilus were studied qualitatively by solving the Poisson-Boltzmann (PB) equation in aqueous solution and with physiological ionic strength. The electrostatic potential was calculated for conformations of the ribosome derived by recent normal mode analysis (Tama, F., et al. Proc Natl Acad Sci USA 2003 100, 9319-9323) of the ratchet-like reorganization that occurs during translocation (Frank, J.; Agrawal, R. K. Nature 2000 406, 318-322). To solve the PB equation, effective parameters (charges and radii), applicable to a highly charged backbone model of the ribosome, were developed. Regions of positive potential were found at the binding site of the elongation factors G and Tu, as well as where the release factors bind. Large positive potential areas are especially pronounced around the L11 and L6 proteins. The region around the L1 protein is also positively charged, supporting the idea that L1 may interact with the E-site tRNA during its release from the ribosome after translocation. Functional rearrangement of the ribosome leads to electrostatic changes which may help the translocation of the tRNAs during the elongation stage.

Visualizing the RNA molecule in the bacterially expressed vesicular stomatitis virus nucleoprotein-RNA complex

Packaging of the RNA molecule in viruses is important for the preservation and expression of viral genomic information. The vesicular stomatitis virus (VSV) nucleoproteins are kept associated with its negative-strand RNA during the mRNA synthesis and replication, in contrast to the tobacco mosaic virus whose nucleoproteins are released from RNA. It has been a puzzle how the VSV RNA is packaged to meet the contradicting requirements of protection and the accessibility to the polymerase. We report an 18 A resolution structure of the recombinant nucleoprotein-RNA complex determined by single-particle electron microscopy. In the 3D density map, a ring of density is resolved on the inner surface and the density is proposed to be the RNA. The RNA is located on the inner surface of the decameric complex near the top end. This is dramatically different from the RNA packaging in TMV, but consistent with previously published biochemical findings.

Analysis of functional motions in Brownian molecular machines with an efficient block normal mode approach: myosin-II and Ca2+ -ATPase

The structural flexibilities of two molecular machines, myosin and Ca(2+)-ATPase, have been analyzed with normal mode analysis and discussed in the context of their energy conversion functions. The normal mode analysis with physical intermolecular interactions was made possible by an improved implementation of the block normal mode (BNM) approach. The BNM results clearly illustrated that the large-scale conformational transitions implicated in the functional cycles of the two motor systems can be largely captured with a small number of low-frequency normal modes. Therefore, the results support the idea that structural flexibility is an essential part of the construction principle of molecular motors through evolution. Such a feature is expected to be more prevalent in motor proteins than in simpler systems (e.g., signal transduction proteins) because in the former, large-scale conformational transitions often have to occur before the chemical events (e.g., ATP hydrolysis in myosin and ATP binding/phosphorylation in Ca(2+)-ATPase). This highlights the importance of Brownian motions associated with the protein domains that are involved in the functional transitions; in this sense, Brownian molecular machines is an appropriate description of molecular motors, although the normal mode results do not address the origin of the ratchet effect. The results also suggest that it might be more appropriate to describe functional transitions in some molecular motors as intrinsic elastic motions modulating local structural changes in the active site, which in turn gets stabilized by the subsequent chemical events, in contrast with the conventional idea of local changes somehow getting amplified into larger-scale motions. In the case of myosin, for example, we favor the idea that Brownian motions associated with the flexible converter propagates to the Switch I/II region, where the salt-bridge formation gets stabilized by ATP hydrolysis, in contrast with the textbook notion that ATP hydrolysis drives the converter motion. Another useful aspect of the BNM results is that selected low-frequency normal modes have been identified to form a set of collective coordinates that can be used to characterize the progress of a significant fraction of large-scale conformational transitions. Therefore, the present normal mode analysis has provided a stepping-stone toward more elaborate microscopic simulations for addressing critical issues in free energy conversions in molecular machines, such as the coupling and the causal relationship between collective motions and essential local changes at the catalytic active site where ATP hydrolysis occurs.

Suppression of multiple substrate mutations by spliceosomal prp8 alleles suggests functional correlations with ribosomal ambiguity mutants

Conformational change within the spliceosome is required between the first catalytic step of pre-mRNA splicing, when the branch site (BS) attacks the 5' splice site, and the second step, when the 5' exon attacks the 3' splice site, yielding mRNA and lariat-intron products. A genetic screen for suppressors of BS A-to-G mutants, which stall between the two steps, identified Prp8, the highly conserved spliceosomal factor. prp8 suppressors facilitate the second step for multiple intron mutants and interact functionally with first step suppressors, alleles of PRP16 and U6 snRNA. Genetic interactions among prp8, prp16, and U6 alleles suggest that these factors control a common stage in first-to-second step transition. We propose that mutant substrates are utilized by alteration of the equilibrium between first/second step conformations, resembling tRNA miscoding caused by altered equilibrium between open/closed ribosomal conformations. This mechanistic commonality suggests that alteration of rearrangements represents an evolutionarily convenient way of modulating substrate selectivity.

Dynamics and processivity of 40S ribosome scanning on mRNA in yeast

The eukaryotic 40S ribosomal subunit locates the translation initiation codon on an mRNA via the so-called scanning process that follows 40S binding to the capped 5' end. This key step in translation is required for the expression of almost all eukaryotic genes, yet the mechanism and dynamics of scanning are unknown. We have performed quantitative studies in vivo and in vitro of the movement of yeast 40S ribosomes along 5' untranslated regions (UTRs) of different lengths. 40S subunits perform cap-dependent scanning with high processivity for more than 1700 nucleotides in cells of Saccharomyces cerevisiae. Moreover, the observed rates of expression indicate that scanning is performed by an untethered 40S subunit that has been released from the 5' cap complex. Unexpectedly, the capability to maintain scanning competence on a long 5' UTR is more dependent on the Ded1/Dbp1 type of helicase than on eIF4A or eIF4B. In a yeast cell-free extract, scanning shows reduced processivity, with an estimated net 5'-->3' rate of approximately 10 nucleotides per second at 26 degrees C. We have developed a biased bidirectional walking model of ribosomal scanning that provides a framework for understanding the above observations as well as other known quantitative and qualitative features of this process.

Interactions of translational factor EF-G with the bacterial ribosome before and after mRNA translocation

A conserved translation factor, known as EF-G in bacteria, promotes the translocation of tRNA and mRNA in the ribosome during protein synthesis. Here, EF-G.ribosome complexes in two intermediate states, before and after mRNA translocation, have been probed with hydroxyl radicals generated from free Fe(II)-EDTA. Before mRNA translocation and GTP hydrolysis, EF-G protected a limited set of nucleotides in both subunits of the ribosome from cleavage by hydroxyl radicals. In this state, an extensive set of nucleotides, in the platform and head domains of the 30S subunit and in the L7/L12 stalk region of the 50S subunit, became more exposed to hydroxyl radical attack, suggestive of conformational changes in these domains. Following mRNA translocation, EF-G protected a larger set of nucleotides (23S rRNA helices H43, H44, H89, and H95; 16S rRNA helices h5 and h15). No nucleotide with enhanced reactivity to hydroxyl radicals was detected in this latter state. Both before and after mRNA translocation, EF-G protected identical nucleotides in h5 and h15 of the 30S subunit. These results suggest that h5 and h15 may remain associated with EF-G during the dynamic course of the translocation mechanism. Nucleotides in H43 and H44 of the 50S subunit were protected only after translocation and GTP hydrolysis, suggesting that these helices interact dynamically with EF-G. The effects in H95 suggest that EF-G interacts weakly with H95 before mRNA translocation and strongly and more extensively with this helix following mRNA translocation.

Decoding the genome: a modified view

Transfer RNA's role in decoding the genome is critical to the accuracy and efficiency of protein synthesis. Though modified nucleosides were identified in RNA 50 years ago, only recently has their importance to tRNA's ability to decode cognate and wobble codons become apparent. RNA modifications are ubiquitous. To date, some 100 different posttranslational modifications have been identified. Modifications of tRNA are the most extensively investigated; however, many other RNAs have modified nucleosides. The modifications that occur at the first, or wobble position, of tRNA's anticodon and those 3'-adjacent to the anticodon are of particular interest. The tRNAs most affected by individual and combinations of modifications respond to codons in mixed codon boxes where distinction of the third codon base is important for discriminating between the correct cognate or wobble codons and the incorrect near-cognate codons (e.g. AAA/G for lysine versus AAU/C asparagine). In contrast, other modifications expand wobble codon recognition, such as U*U base pairing, for tRNAs that respond to multiple codons of a 4-fold degenerate codon box (e.g. GUU/A/C/G for valine). Whether restricting codon recognition, expanding wobble, enabling translocation, or maintaining the messenger RNA, reading frame modifications appear to reduce anticodon loop dynamics to that accepted by the ribosome. Therefore, we suggest that anticodon stem and loop domain nucleoside modifications allow a limited number of tRNAs to accurately and efficiently decode the 61 amino acid codons by selectively restricting some anticodon-codon interactions and expanding others.

EF-G-independent reactivity of a pre-translocation-state ribosome complex with the aminoacyl tRNA substrate puromycin supports an intermediate (hybrid) state of tRNA binding

Following peptide-bond formation, the mRNA:tRNA complex must be translocated within the ribosomal cavity before the next aminoacyl tRNA can be accommodated in the A site. Previous studies suggested that following peptide-bond formation and prior to EF-G recognition, the tRNAs occupy an intermediate (hybrid) state of binding where the acceptor ends of the tRNAs are shifted to their next sites of occupancy (the E and P sites) on the large ribosomal subunit, but where their anticodon ends (and associated mRNA) remain fixed in their prepeptidyl transferase binding states (the P and A sites) on the small subunit. Here we show that pre-translocation-state ribosomes carrying a dipeptidyl-tRNA substrate efficiently react with the minimal A-site substrate puromycin and that following this reaction, the pre-translocation-state bound deacylated tRNA:mRNA complex remains untranslocated. These data establish that pre-translocation-state ribosomes must sample or reside in an intermediate state of tRNA binding independent of the action of EF-G.

Release of ribosome-bound ribosome recycling factor by elongation factor G

Elongation factor G (EF-G) and ribosome recycling factor (RRF) disassemble post-termination complexes of ribosome, mRNA, and tRNA. RRF forms stable complexes with 70 S ribosomes and 50 S ribosomal subunits. Here, we show that EF-G releases RRF from 70 S ribosomal and model post-termination complexes but not from 50 S ribosomal subunit complexes. The release of bound RRF by EF-G is stimulated by GTP analogues. The EF-G-dependent release occurs in the presence of fusidic acid and viomycin. However, thiostrepton inhibits the release. RRF was shown to bind to EF-G-ribosome complexes in the presence of GTP with much weaker affinity, suggesting that EF-G may move RRF to this position during the release of RRF. On the other hand, RRF did not bind to EF-G-ribosome complexes with fusidic acid, suggesting that EF-G stabilized by fusidic acid does not represent the natural post-termination complex. In contrast, the complexes of ribosome, EF-G and thiostrepton could bind RRF, although with lower affinity. These results suggest that thiostrepton traps an intermediate complex having RRF on a position that clashes with the P/E site bound tRNA. Mutants of EF-G that are impaired for translocation fail to disassemble post-termination complexes and exhibit lower activity in releasing RRF. We propose that the release of ribosome-bound RRF by EF-G is required for post-termination complex disassembly. Before release from the ribosome, the position of RRF on the ribosome will change from the original A/P site to a new location that clashes with tRNA on the P/E site.

A functional interaction between ribosomal proteins S7 and S11 within the bacterial ribosome

In this study, we used site-directed mutagenesis to disrupt an interaction that had been detected between ribosomal proteins S7 and S11 in the crystal structure of the bacterial 30 S subunit. This interaction, which is located in the E site, connects the head of the 30 S subunit to the platform and is involved in the formation of the exit channel through which passes the 30 S-bound messenger RNA. Neither mutations in S7 nor mutations in S11 prevented the incorporation of the proteins into the 30 S subunits but they perturbed the function of the ribosome. In vivo assays showed that ribosomes with either mutated S7 or S11 were altered in the control of translational fidelity, having an increased capacity for frameshifting, readthrough of a nonsense codon and codon misreading. Toeprinting and filter-binding assays showed that 30 S subunits with either mutated S7 or S11 have an enhanced capacity to bind mRNA. The effects of the S7 and S11 mutations can be related to an increased flexibility of the head of the 30 S, to an opening of the mRNA exit channel and to a perturbation of the proposed allosteric coupling between the A and E sites. Altogether, our results demonstrate that S7 and S11 interact in a functional manner and support the notion that protein-protein interactions contribute to the dynamics of the ribosome.

Cross-correlation and merging of crystallographic reflections derived from cryoelectron micrographs of 3D crystals: application to the Limulus acrosomal bundle

A method is described for merging in reciprocal space of electron microscopic data from three-dimensional crystals of the acrosomal bundle. Permutation of indices was required to find the proper alignment of data from different bundles. The method utilizes a statistical evaluation of the significance of the cross-correlation results to indicate the proper order for merging. The three-dimensional (3D) merging is a reference-free operation that does not depend on choosing a "zero-tilt" user-defined starting point. Results from the merging are given and the merged 3D data to 9.5A resolution is evaluated for coherence. General issues such as statistical significance of cross-correlation function peaks, symmetry evaluation, and phase coherence as a function of amplitude are discussed.