Switch-peptides as folding precursors in self-assembling peptides and amyloid fibrillogenesis

Systemic Delivery of Tumor-Targeted Bax-Derived Membrane-Active Peptides for the Treatment of Melanoma Tumors in a Humanized SCID Mouse Model

Melanoma is a highly metastatic and deadly form of cancer. Invasive melanoma cells overexpress integrin α_vβ₃, which is a well-known target for Arg-Gly-Asp-based (RGD) peptides. We developed a sophisticated method to synthetize milligram amounts of a targeted vector that allows the RGD-mediated targeting, internalization, and release of a mitochondria-disruptive peptide derived from the pro-apoptotic Bax protein. We found that 2.5 μM Bax[109-127] was sufficient to destabilize the mitochondria in ten different tumor cell lines, even in the presence of the anti-apoptotic Bcl2 protein, which is often involved in tumor resistance. This pore-forming peptide displayed antitumor activity when it was covalently linked by a disulfide bridge to the tetrameric RAFT-c[RGD]₄-platform and after intravenous injection in a human melanoma tumor model established in humanized immuno-competent mice. In addition to its direct toxic effect, treatment with this combination induced the release of the immuno-stimulating factor monocyte chimoattractant protein 1 (MCP1) in the blood and a decrease in the level of the pro-angiogenic factor FGF2. Our novel multifunctional, apoptosis-inducing agent could be further customized and assayed for potential use in tumor-targeted therapy.

Palladium-Assisted Removal of a Solubilizing Tag from a Cys Side Chain To Facilitate Peptide and Protein Synthesis

Reversible attachment of solubilizing tags to hydrophobic peptides to facilitate their purification and ligation is an essential yet challenging task in chemical protein synthesis. The efficient palladium-assisted removal of the solubilizing tag linked to the Cys side chain is reported. The strategy was applied for the efficient preparation of histone protein H4 from two fragments via one-pot operation of ligation, removal of the solubilizing tag, and desulfurization.

Solid-state NMR evidence for β-hairpin structure within MAX8 designer peptide nanofibers

MAX8, a designer peptide known to undergo self-assembly following changes in temperature, pH, and ionic strength, has demonstrated usefulness for tissue engineering and drug delivery. It is hypothesized that the self-assembled MAX8 nanofiber structure consists of closed β-hairpins aligned into antiparallel β-sheets. Here, we report evidence from solid-state NMR spectroscopy that supports the presence of the hypothesized β-hairpin conformation within the nanofiber structure. Specifically, our (13)C-(13)C two-dimensional exchange data indicate spatial proximity between V3 and K17, and (13)C-(13)C dipolar coupling measurements reveal proximity between the V3 and V18 backbone carbonyls. Moreover, isotopic dilution of labeled MAX8 nanofibers did not result in a loss of the (13)C-(13)C dipolar couplings, showing that these couplings are primarily intramolecular. NMR spectra also indicate the existence of a minor conformation, which is discussed in terms of previously hypothesized nanofiber physical cross-linking and possible nanofiber polymorphism.

Chemical strategies for controlling protein folding and elucidating the molecular mechanisms of amyloid formation and toxicity

It has been more than a century since the first evidence linking the process of amyloid formation to the pathogenesis of Alzheimer's disease. During the last three decades in particular, increasing evidence from various sources (pathology, genetics, cell culture studies, biochemistry, and biophysics) continues to point to a central role for the pathogenesis of several incurable neurodegenerative and systemic diseases. This is in part driven by our improved understanding of the molecular mechanisms of protein misfolding and aggregation and the structural properties of the different aggregates in the amyloid pathway and the emergence of new tools and experimental approaches that permit better characterization of amyloid formation in vivo. Despite these advances, detailed mechanistic understanding of protein aggregation and amyloid formation in vitro and in vivo presents several challenges that remain to be addressed and several fundamental questions about the molecular and structural determinants of amyloid formation and toxicity and the mechanisms of amyloid-induced toxicity remain unanswered. To address this knowledge gap and technical challenges, there is a critical need for developing novel tools and experimental approaches that will not only permit the detection and monitoring of molecular events that underlie this process but also allow for the manipulation of these events in a spatial and temporal fashion both in and out of the cell. This review is primarily dedicated in highlighting recent results that illustrate how advances in chemistry and chemical biology have been and can be used to address some of the questions and technical challenges mentioned above. We believe that combining recent advances in the development of new fluorescent probes, imaging tools that enabled the visualization and tracking of molecular events with advances in organic synthesis, and novel approaches for protein synthesis and engineering provide unique opportunities to gain a molecular-level understanding of the process of amyloid formation. We hope that this review will stimulate further research in this area and catalyze increased collaboration at the interface of chemistry and biology to decipher the mechanisms and roles of protein folding, misfolding, and aggregation in health and disease.

Structure and hydrogel formation studies on homologs of a lactoglobulin-derived peptide

In order to study the impact of the amino acid sequence on the morphology of peptide-based nanostructures and their hydrogel formation, we designed a series of analogs of a milk-derived octapeptide (OP), mainly using strategic amino acid substitutions. Electronic transmission microscopy (TEM) and circular dichroism (CD) spectropolarimetry were used to analyze the nanostructures formed, and to characterize some structural features of the modified peptides. Further, the potential to form hydrogels was investigated for all of the analogous peptides. We learned that those able to undergo secondary structure transition to β-sheet conformation form strong gels. The results reported highlight some key structural properties that explain the self-assembly propensity of Peptide OP.

Self-assembly pathways of E22Δ-type amyloid β peptide mutants generated from non-aggregative O-acyl isopeptide precursors

The recently identified E22Δ-type amyloid β peptide (Aβ) mutants are reported to favor oligomerization over fibrillization and to exhibit more-potent synaptotoxicity than does wild-type (WT) Aβ. Aβ(E22Δ) mutants can thus be expected to serve as tools for clarifying the impact of Aβ oligomers in Alzheimer's disease (or Alzheimer's-type dementia). However, the biochemical and biophysical properties of Aβ(E22Δ) have not been conclusively determined. Here, we evaluated the self-assembly pathways of Aβ(E22Δ) mutants generated from water-soluble, non-aggregative O-acyl isopeptide precursors. Circular dichroism spectroscopy, Western blot analysis, and thioflavin-T fluorescence intensity and cellular toxicity assays suggest that the self-assembly pathways of Aβ(E22Δ) differed from those of Aβ(WT). Aβ1-40(E22Δ) underwent a rapid random coil→β-sheet conformational change in its monomeric or low-molecular-weight oligomeric states, whereas Aβ1-40(WT) self-assembled gradually without losing its propensity to form random coil structures. The Aβ1-42(E22Δ) monomer formed β-sheet-rich oligomers more rapidly than did Aβ1-42(WT). Additionally, the Aβ1-42(E22Δ) oligomers appear to differ from Aβ1-42(WT) oligomers in size, shape, or both. These results should provide new insights into the functions of Aβ(E22Δ) mutants.

Formation and stability of nanofibers from a milk-derived peptide

The objective of the present work was to investigate the physicochemical conditions that trigger the self-assembly of peptide β-lg f1-8 and therefore lead to nanofibers and hydrogel formation. Nanostructures formed by self-assembly of peptide β-lg f1-8 in the pH range of 2.0-11.0 were studied by transmission electron microscopy (TEM). Hydrogel formation was studied as a function of pH and resulted in evidence of a link between hydrogel formation and the charge distribution carried by the peptide structure. Finally, circular dichroism (CD) spectroscopy was used to characterize the effects of peptide concentration (0.4-2.0 mg/mL), ionic strength (0-1 M NaCl), and temperature (20-80 °C) on the secondary structure of peptide β-lg f1-8. Hydrogels were obtained at peptide concentrations above 2.5 mg/mL. Peptide concentration and pH adjustment were shown to trigger self-assembly of β-lg f1-8, but increasing ionic strength had no effect. Heating to 80 °C induced a stronger CD signal intensity due to an increase in solubility of the peptide, whereas only slight changes in CD pattern were found upon cooling to 20 °C. Overall, results emphasize the role of particular molecular interactions in β-sheet self-assembly of peptide β-lg f1-8 and pH-dependent electrostatic interactions occurring between β-lg f1-8 units, which can explain its propensity to self-assembly.

The depsipeptide method for solid-phase synthesis of difficult peptides

After about one century of peptide chemistry, the main limitation to the accessibility of peptides and proteins via chemosynthesis is the arising of folding and aggregation phenomena. This is true not only for sequences above a critical length but also for several biologically relevant substrates that are relatively short yet form either highly folded structures (e.g. WW domains) or fibrils and aggregates after final deprotection (beta-amyloid peptide). Such so-called difficult sequences may be more easily obtained via their corresponding depsipeptides (O-acyl isopeptides), ester isomers that are often easier to assemble and purify, and are smoothly converted to the parent amides under mild conditions. The depsipeptide method is the most recent technique to improve the outcome of difficult syntheses, applicable to sequences containing residues of serine or threonine. A brief overview is presented about chemical aspects of the method, the steps that have been undertaken for its optimization, and the evaluation of its efficiency. Further applications of analogous principles to other critical topics in peptide synthesis such as condensation of peptide segments and solid-phase synthesis of naturally occurring cyclodepsipeptides are addressed as well.

Synthesis of chemically modified bioactive peptides: recent advances, challenges and developments for medicinal chemistry

Although not complying with Lipinski’s rule, peptides are to an increasing extent being developed into new active pharmaceutical ingredients. This is mainly due to novel application routes, formulations and chemical modifications, which confer on the peptides improved uptake and increased metabolic stability. A brief survey of currently approved peptide drugs and the present scope of the application of peptides as drugs is provided. Cyclic peptides are emerging as an interesting class of peptides with conformational rigidity and homogeneity, high receptor affinity and selectivity, increased metabolic stability and – in special cases – even oral availability. Challenges and new methodology for the synthesis of cyclic peptides are outlined and an overview of approaches toward the design of peptide conformation and peptide modification by nonproteinogenic building blocks is given.

"Click peptide": pH-triggered in situ production and aggregation of monomer Abeta1-42

The intense and uncontrollable self-assembling nature of amyloid beta peptide (Abeta) 1-42 is known to cause difficulties in preparing monomeric Abeta1-42; this results in irreproducible or discrepant study outcomes. Herein, we report novel features of a pH click peptide of Abeta1-42 that was designed to overcome these problems. The click peptide is a water-soluble precursor peptide of Abeta1-42 with an O-acyl isopeptide structure between the Gly25-Ser26 sequence. The click peptide adopts and retains a monomeric, random coil state under acidic conditions. Upon change to neutral pH (pH click), the click peptide converts to Abeta1-42 promptly (t(1/2) approximately 10 s) and quantitatively through an O-to-N intramolecular acyl migration. As a result of this quick and irreversible conversion, monomer Abeta1-42 with a random coil structure is produced in situ. Moreover, the oligomerization, amyloid fibril formation and conformational changes of the produced Abeta1-42 can be observed over time. This click peptide strategy should provide a reliable experimental system to investigate the pathological role of Abeta1-42 in Alzheimer's disease.

O-acyl isopeptide method: efficient synthesis of isopeptide segment and application to racemization-free segment condensation

We report the establishment of the O-acyl isopeptide method-based racemization-free segment condensation reaction toward future chemical protein synthesis. Peptide segments containing C-terminal O-acyl Ser/Thr residues were successfully synthesized by use of a lower nucleophilic base cocktail for Fmoc removal, and then coupled to an amino group of a peptide-resin without side reactions or epimerization. We also succeeded in performing the segment condensation in a sequential manner and in solution phase conditions as well.

Isopeptide method: development of S-acyl isopeptide method for the synthesis of difficult sequence-containing peptides

A novel strategy for a more efficient synthesis of difficult sequence-containing peptides, the S-acyl isopeptide method, was developed and successfully applied. A model pentapeptide Ac-Val-Val-Cys-Val-Val-NH2 was synthesized via its water-soluble S-acyl isopeptide using an S-acyl isodipeptide unit, Boc-Cys(Fmoc-Val)-OH. An S-acyl isopeptide possessing excellent water solubility could be readily and quantitatively converted to the native peptide via an S--N intramolecular acyl migration reaction at pH 7.4. Thus, the S-acyl isopeptide method provides a useful tool in peptide chemistry.

Controlled disassembly of peptide amphiphile fibres

In this paper, the introduction of both a methionine residue and a nitrobenzyl derivative as a labile linker between the peptide part and the hydrophobic alkyl chain of a peptide amphiphile are presented. These modifications are shown not to inhibit the formation of structured assemblies that analogous peptide amphiphiles lacking the linkers are able to form. Moreover, the introduction of either labile linker allows removal of the peptide amphiphile's stabilizing hydrophobic moieties to initiate a controlled disassembly of fibre aggregates. This is achieved by either treatment with CNBr or UV irradiation, respectively. These disassembly mechanisms could be the starting point for methodology that allows further manipulation of self-assembled peptide amphiphile architectures.

'O-Acyl isopeptide method' for peptide synthesis: Solvent effects in the synthesis of Abeta1-42 isopeptide using 'O-acyl isodipeptide unit'

'O-Acyl isopeptide method' is an efficient synthetic method for peptides. We designed 'O-acyl isodipeptide units', Boc-Ser/Thr(Fmoc-Xaa)-OH, as important building blocks to enable routine use of the O-acyl isopeptide method. In the synthesis of an Abeta1-42 isopeptide using O-acyl isodipeptide unit Boc-Ser(Fmoc-Gly)-OH, a side reaction, resulting in the deletion of Ser(26) in the O-acyl isopeptide structure, was noticed during coupling of the unit. We observed that the side reaction occurred during the activation step and was solvent-dependent. In DMF or NMP, an intramolecular side reaction, originating from the activated species of the unit, occurred during the activation step. In non-polar solvents such as CHCl(3) or CH(2)Cl(2), the side reaction was less likely to occur. Using CH(2)Cl(2) as solvent in coupling the unit, the target Abeta1-42 isopeptide was synthesized with almost no major side reaction.