Energetics of intrachain salt-linkage formation in collagen

Electrostatic effects in collagen fibril formation

Using light scattering and Atomic Force Microscopy techniques, we have studied the kinetics and equilibrium scattering intensity of collagen association, which is pertinent to the vitreous of the human eye. Specifically, we have characterized fibrillization dependence on pH, temperature, and ionic strength. At higher and lower pH, collagen triple helices remain stable in solution without fibrillization. At physiological pH, fibrillization occurs and the fibril growth is slowed upon either an increase in ionic strength or a decrease in temperature. The total light scattering with respect to ionic strength is non-monotonic in these conditions as a result of a competing dependence of fibril concentration and size on ionic strength. Fibril concentration is the highest at lower ionic strengths and rapidly decays for higher ionic strengths. On the other hand, fibril size is larger in solutions with higher ionic strength. We present a theoretical model, based on dipolar interactions in solutions, to describe the observed electrostatic nature of collagen assembly. At extreme pH values, either very low or very high, collagen triple helices carry a large net charge of the same sign preventing their assembly into fibrils. At intermediate pH values, fluctuations in the charge distribution of the collagen triple helices around roughly zero net charge lead to fibrillization. The growth kinetics of fibrils in this regime can be adequately described by dipolar interactions arising from charge fluctuations.

Phase Behaviour and Miscibility Studies of Collagen/Silk Fibroin Macromolecular System in Dilute Solutions and Solid State

Miscibility is an important issue in biopolymer blends for analysis of the behavior of polymer pairs through the detection of phase separation and improvement of the mechanical and physical properties of the blend. This study presents the formulation of a stable and one-phase mixture of collagen and regenerated silk fibroin (RSF), with the highest miscibility ratio between these two macromolecules, through inducing electrostatic interactions, using salt ions. For this aim, a ternary phase diagram was experimentally built for the mixtures, based on observations of phase behavior of blend solutions with various ratios. The miscibility behavior of the blend solutions in the miscible zones of the phase diagram was confirmed quantitatively by viscosimetric measurements. Assessing the effects of biopolymer mixing ratio and salt ions, before and after dialysis of blend solutions, revealed the importance of ion-specific interactions in the formation of coacervate-based materials containing collagen and RSF blends that can be used in pharmaceutical, drug delivery, and biomedical applications. Moreover, the conformational change of silk fibroin from random coil to beta sheet, in solution and in the final solid films, was detected by circular dichroism (CD) and Fourier transform infrared spectroscopy (FTIR), respectively. Scanning electron microscopy (SEM) exhibited alterations of surface morphology for the biocomposite films with different ratios. Surface contact angle measurement illustrated different hydrophobic properties for the blended film surfaces. Differential scanning calorimetry (DSC) showed that the formation of the beta sheet structure of silk fibroin enhances the thermal stability of the final blend films. Therefore, the novel method presented in this study resulted in the formation of biocomposite films whose physico-chemical properties can be tuned by silk fibroin conformational changes by applying different component mixing ratios.

Computational design of a collagen A:B:C-type heterotrimer

We have successfully designed an A:B:C collagen peptide heterotrimer using an automated computational approach. The algorithm maximizes the energy gap between the target and competing misfolded states while enforcing a minimum target stability. Circular dichroism (CD) measurements confirm that all three peptides are required to form a stable, structured triple helix. This study highlights the power of automated computational design, providing model systems to probe the biophysics of collagen assembly and developing general methods for the design of fibrous proteins.

The contribution of interchain salt bridges to triple-helical stability in collagen

Studies on collagen and collagen-like peptides suggest that triple-helical stability can vary along the amino acid chain. In this regard, it has been shown that lysine residues in the Y position and acidic residues in the X' position of (GPO)(3)GXYGX'Y'(GPO)(3) peptides lead to triple-helical structures with melting temperatures similar to (GPO)(8) (where O is hydroxyproline), which is generally regarded as the most stable collagen-like sequence of this length. This enhanced stability has been attributed to the formation of salt bridges between adjacent collagen chains. In this study, we explore the relationship between interchain salt bridge formation and triple-helical stability using detailed molecular simulations. Although our results confirm that salt bridges promote triple-helical stability, we find that not all salt bridges are created equal. In particular, lysine-glutamate salt bridges are most stabilizing when formed between residues in the middle strand (B) and the trailing strand (C), whereas lysine-aspartate salt bridges are most stabilizing when formed between residues in the leading (A) and middle (B) strand-the latter observation being consistent with recent NMR data on a heterotrimeric model peptide. Overall, we believe these data clarify the role of salt bridges in modulating triple-helical stability and can be used to guide the design of collagen-like peptides that have specific interchain interactions.

Electric device improves bonds of simplified etch-and-rinse adhesives

OBJECTIVES

This study investigated the effects of an electric field produced by a new device for the application of etch-and-rinse adhesives on demineralized dentin surfaces.

METHODS

Three simplified etch-and-rinse adhesives (Single Bond, Prime&Bond NT and One-Step) were applied with the electric device and compared with controls prepared with disposable sponges. Specimens were processed for microtensile bond strength test and nanoleakage investigation using high resolution SEM.

RESULTS

Microtensile testing revealed higher bond strengths (p<0.05) for all adhesives tested when electricity was used. Adhesive interfaces prepared with electric impulses exhibited very homogenous hybrid layers with minimal nanoleakage compared with the controls.

SIGNIFICANCE

The use of electricity produced by a new electronic device during the application of dentin adhesives may increase adhesive adaptation to the dentin substrate and improve dentin hybridization due to the substrate modifications induced by an electric field on the demineralized dentin organic matrix.

Electrostatic interactions modulate the conformation of collagen I

The pH- and electrolyte-dependent charging of collagen I fibrils was analyzed by streaming potential/streaming current experiments using the Microslit Electrokinetic Setup. Differential scanning calorimetry and circular dichroism spectroscopy were applied in similar electrolyte solutions to characterize the influence of electrostatic interactions on the conformational stability of the protein. The acid base behavior of collagen I was found to be strongly influenced by the ionic strength in KCl as well as in CaCl(2) solutions. An increase of the ionic strength with KCl from 10(-4) M to 10(-2) M shifts the isoelectric point (IEP) of the protein from pH 7.5 to 5.3. However, a similar increase of the ionic strength in CaCl(2) solutions shifts the IEP from 7.5 to above pH 9. Enhanced thermal stability with increasing ionic strength was observed by differential scanning calorimetry in both electrolyte systems. In line with this, circular dichroism spectroscopy results show an increase of the helicity with increasing ionic strength. Better screening of charged residues and the formation of salt bridges are assumed to cause the stabilization of collagen I with increasing ionic strength in both electrolyte systems. Preferential adsorption of hydroxide ions onto intrinsically uncharged sites in KCl solutions and calcium binding to negatively charged carboxylic acid moieties in CaCl(2) solutions are concluded to shift the IEP and influence the conformational stability of the protein.

Structure of the integrin alpha2beta1-binding collagen peptide

We have determined the 1.8A crystal structure of a triple helical integrin-binding collagen peptide (IBP) with sequence (Gly-Pro-Hyp)(2)-Gly-Phe-Hyp-Gly-Glu-Arg-(Gly-Pro-Hyp)(3). The central GFOGER hexapeptide is recognised specifically by the integrins alpha2beta1, alpha1beta1, alpha10beta1 and alpha11beta1. These integrin/collagen interactions are implicated in a number of key physiological processes including cell adhesion, cell growth and differentiation, and pathological states such as thrombosis and tumour metastasis. Comparison of the IBP structure with the previously determined structure of an identical collagen peptide in complex with the integrin alpha2-I domain (IBP(c)) allows the first detailed examination of collagen in a bound and an unbound state. The IBP structure shows a direct and a water-mediated electrostatic interaction between Glu and Arg side-chains from adjacent strands, but no intra-strand interactions. The interactions between IBP Glu and Arg side-chains are disrupted upon integrin binding. A comparison of IBP and IBP(c) main-chain conformation reveals the flexible nature of the triple helix backbone in the imino-poor GFOGER region. This flexibility could be important to the integrin-collagen interaction and provides a possible explanation for the unique orientation of the three GFOGER strands observed in the integrin-IBP(c) complex crystal structure.

Staggered molecular packing in crystals of a collagen-like peptide with a single charged pair

The crystal structure of the triple-helical peptide, (Pro-Hyp-Gly)(4)-Glu-Lys-Gly-(Pro-Hyp-Gly)(5) has been determined to 1.75 A resolution. This peptide was designed to examine the effect of a pair of adjacent, oppositely charged residues on collagen triple-helical conformation and intermolecular interactions. The molecular conformation (a 7(5) triple helix) and hydrogen bonding schemes are similar to those previously reported for collagen triple helices and provides a second instance of water mediated N--H . . . O==C interchain hydrogen bonds for the amide group of the residue following Gly. Although stereochemically capable of forming intramolecular or intermolecular ion pairs, the lysine and glutamic acid side-chains instead display direct interactions with carbonyl groups and hydroxyproline hydroxyl groups or interactions mediated by water molecules. Solution studies on the EKG peptide indicate stabilization at neutral pH values, where both Glu and Lys are ionized, but suggest that this occurs because of the effects of ionization on the individual residues, rather than ion pair formation. The EKG structure suggests a molecular mechanism for such stabilization through indirect hydrogen bonding. The molecular packing in the crystal includes an axial stagger between molecules, reminiscent of that observed in D-periodic collagen fibrils. The presence of a Glu-Lys-Gly triplet in the middle of the sequence appears to mediate this staggered molecular packing through its indirect water-mediated interactions with backbone C==O groups and side chains.

The collagen-like peptide (GER)15GPCCG forms pH-dependent covalently linked triple helical trimers

A collagen-like peptide with the sequence (GER)(15) GPCCG was synthesized to study the formation of a triple helix in the absence of proline residues. This peptide can form a triple helix at acidic and basic pH, but is insoluble around neutral pH. The formation of a triple helix can be used to covalently oxidize the cysteine residues into a disulfide knot. Three disulfide bonds are formed between the three chains as has been found at the carboxyl-terminal end of the type III collagen triple helix. This is a new method to covalently link collagen-like peptides with a stereochemistry that occurs in nature. The peptide undergoes a reversible, cooperative triple helix coil transition with a transition midpoint (T(m)) of 17 to 20 degrees C at acidic pH and 32 to 37 degrees C at basic pH. At acidic pH there was little influence of the T(m) on the salt concentration of the buffer. At basic pH increasing the salt concentration reduced the T(m) to values comparable to the stability at acidic pH. These experiments show that the tripeptide unit GER which occurs frequently in collagen sequences can form a triple helical structure in the absence of more typical collagen-like tripeptide units and that charge-charge interactions play a role in the stabilization of the triple helix of this peptide.

Positional preferences of ionizable residues in Gly-X-Y triplets of the collagen triple-helix

Collagens contain a high amount of charged residues involved in triple-helix stability, fibril formation, and ligand binding. The contribution of charged residues to stability was analyzed utilizing a host-guest peptide system with a single Gly-X-Y triplet embedded within Ac(Gly-Pro-Hyp)3-Gly-X-Y-(Gly-Pro-Hyp)4-Gly-Gly-NH2. The ionizable residues Arg, Lys, Glu, and Asp were incorporated into the X position of Gly-X-Hyp; in the Y position of Gly-Pro-Y; or as pairs of oppositely charged residues occupying X and Y positions. The Gly-X-Hyp peptides had similar thermal stabilities, only marginally less stable than Gly-Pro-Hyp, whereas Gly-Pro-Y peptides showed a wide thermal stability range (Tm = 30-45 degrees C). The stability of peptides with oppositely charged residues in the X and Y positions appears to reflect simple additivity of the individual residues, except when X is occupied by a basic residue and Y = Asp. The side chains of Glu, Lys, and Arg have the potential to form hydrogen bonds with available peptide backbone carbonyl groups within the triple-helix, whereas the shorter Asp side chain does not. This may relate to the unique involvement of Asp residues in energetically favorable ion pair formation. These studies clarify the dependence of triple-helix stability on the identity, position, and ionization state of charged residues.

Identification of several types of periodicities in the collagens and their simulation

The collagens constitute an important population of proteins providing the structural support in vertebrate tissues A collagen is mainly based on a series of tripeptides of the type GX1X2 (G = Glycine, X1 and X2 being any residues). The nine amino acids occurring with significant frequencies in the X1 and X2 residue sites and G form the reduced protein alphabet Q = [A,D,E,G,K,L,P,Q,R,S] (A = Alanine, D = Aspartic acid, E = Glutamic acid, K = Lysine, L = Leucine, P = Proline, Q = Glutamine, R = Arginine, S = Serine). Surprisingly, the method based on the autocorrelation function w(X)iw' analysing the probability that an amino acid w' in Q occurs any i residues X after an amino acid w in Q (called i-motif w(X)iw'), identifies six types of modulo 3 periodicities in collagens: three basic types 0, 1 and 2 modulo 3 and three combined types 0,1, 0,2 and 1,2 modulo 3. Furthermore, the classification of these 100 i-motifs according to the types of periodicities shows several strong relations between four sub-sets of Q [G], [A,D,P,S], [E,L] and [K,Q,R]. Then, these relations allow the construction of a simple automaton for the generation of model collagen sequences. Indeed, this automaton can simulate the six types of periodicities and it retrieves the types of periodicities for almost all i-motifs. Finally, the autocorrelation function based on the sub-set [K,Q,R] identifies segments of 18 amino acids in collagens which may correspond to the exons (segments of genes of 54 nucleotides) coding for those collagens.

Substitution of aspartic acid for glycine at position 310 in type II collagen produces achondrogenesis II, and substitution of serine at position 805 produces hypochondrogenesis: analysis of genotype-phenotype relationships

Two different mutations were found in two unrelated probands with lethal chondrodysplasias, one with achondrogenesis type II and the other with the less severe phenotype of hypochondrogenesis. The mutations in the COL2A1 gene were identified by denaturing gradient gel electrophoresis analysis of genomic DNA followed by dideoxynucleotide sequencing and restriction site analysis. The proband with achondrogenesis type II had a heterozygous single-base mutation that substituted aspartate for glycine at position 310 of the alpha 1(II) chain of type II procollagen. The proband with hypochondrogenesis had a heterozygous single-base mutation that substituted serine for glycine at position 805. Type II collagen extracted from cartilage from the probands demonstrated the presence of type I collagen and a delayed electrophoretic mobility, indicating post-translational overmodifications. Analysis of CNBr peptides showed that, in proband 1, the entire peptides were overmodified. Examination of chondrocytes cultured in agarose or alginate indicated that there was a delayed secretion of type II procollagen. In addition, type II collagen synthesized by cartilage fragments from the probands demonstrated a decreased thermal stability. The melting temperature of the type II collagen containing the aspartate-for-glycine substitution was reduced by 4 degrees C, and that of the collagen containing the serine-for-glycine substitution was reduced by 2 degrees C. Electron microscopy of the extracellular matrix from the chondrocyte cultures showed a decreased density of matrix and the presence of unusually short and thin fibrils. Our results indicate that glycine substitutions in the N-terminal region of the type II collagen molecule can produce more severe phenotypes than mutations in the C-terminal region. The aspartate-for-glycine substitution at position 310, which was associated with defective secretion and a probable increased degradation of collagen, is the most destabilizing mutation yet reported in type II procollagen.

Stabilization of the triple-helical structure of natural collagen by side-chain interactions

Conformational energy computations have been used to demonstrate that side-chain-backbone interactions contribute substantially to the stabilization of the triple-helical structure of collagen with a natural sequence. The minimum-energy conformation has been determined for a short triple-helical segment from the N-terminus of type I bovine skin collagen, containing 12 residues in each strand. In this conformation, the side chains of three Arg and four Met residues fold tightly against the triple-helical backbone, forming numerous atomic contacts with the neighboring strand. In addition, the polar groups of the three Arg and two Ser residues form hydrogen bonds with backbone carbonyl groups. The estimated total stabilization due to the side-chain interactions is about -50 kcal/mol out of a total interchain energy of -193.5 kcal/mol. The study presented here is the first application of conformational energy computations to a real sequence in the collagen molecule.

Unique side-chain conformation encoding for chirality and azimuthal orientation in the molecular packing of skin collagen

We used molecular mechanics to study the role of gly X-Y+ sequences, where X- was Asp or Glu and Y+ was Lys or Arg, in the molecular packing of type I collagen. In the minimal energy conformation of a triply stranded molecule having a coiled-coil configuration, the side-chains of these sequences segregated into two oppositely charged groupings of the forms X-Y+X- and Y+X-Y+. Groupings having the same net charge were clustered along two complementary azimuthal edges of the molecule. Intermolecular interactions, through these oppositely charged edges, align the molecules appropriately for the formation of the HHL crosslink of skin. This alignment also can account for the axial periodicity and chiral appearance of skin collagen fibrils.