Towards on-line monitoring of cell growth in microporous scaffolds: Utilization and interpretation of complex permittivity measurements

Impedance Spectroscopy as a Tool for Monitoring Performance in 3D Models of Epithelial Tissues

In contrast to traditional 2D cell cultures, both 3D models and organ-on-a-chip devices allow the study of the physiological responses of human cells. These models reconstruct human tissues in conditions closely resembling the body. Translation of these techniques into practice is hindered by associated labor costs, a need which may be remedied by automation. Impedance spectroscopy (IS) is a promising, automation-compatible label-free technology allowing to carry out a wide range of measurements both in real-time and as endpoints. IS has been applied to both the barrier cultures and the 3D constructs. Here we provide an overview of the impedance-based analysis in different setups and discuss its utility for organ-on-a-chip devices. Most attractive features of impedance-based assays are their compatibility with high-throughput format and supports for the measurements in real time with high temporal resolution, which allow tracing of the kinetics. As of now, IS-based techniques are not free of limitations, including imperfect understanding of the parameters that have their effects on the impedance, especially in 3D cell models, and relatively high cost of the consumables. Moreover, as the theory of IS stems from electromagnetic theory and is quite complex, work on popularization and explanation of the method for experimental biologists is required. It is expected that overcoming these limitations will lead to eventual establishing IS based systems as a standard for automated management of cell-based experiments in both academic and industry environments.

Impedance-based cellular assays for regenerative medicine

Therapies based on regenerative techniques have the potential to radically improve healthcare in the coming years. As a result, there is an emerging need for non-destructive and label-free technologies to assess the quality of engineered tissues and cell-based products prior to their use in the clinic. In parallel, the emerging regenerative medicine industry that aims to produce stem cells and their progeny on a large scale will benefit from moving away from existing destructive biochemical assays towards data-driven automation and control at the industrial scale. Impedance-based cellular assays (IBCA) have emerged as an alternative approach to study stem-cell properties and cumulative studies, reviewed here, have shown their potential to monitor stem-cell renewal, differentiation and maturation. They offer a novel method to non-destructively assess and quality-control stem-cell cultures. In addition, when combined with in vitro disease models they provide complementary insights as label-free phenotypic assays. IBCA provide quantitative and very sensitive results that can easily be automated and up-scaled in multi-well format. When facing the emerging challenge of real-time monitoring of three-dimensional cell culture dielectric spectroscopy and electrical impedance tomography represent viable alternatives to two-dimensional impedance sensing.This article is part of the theme issue 'Designer human tissue: coming to a lab near you'.

Applications of Bioimpedance Measurement Techniques in Tissue Engineering

Rapid development in the field of tissue engineering necessitates implementation of monitoring methods for evaluation of the viability and characteristics of the cell cultures in a real-time, non-invasive and non-destructive manner. Current monitoring techniques are mainly histological and require labeling and involve destructive tests to characterize cell cultures. Bioimpedance measurement technique which benefits from measurement of electrical properties of the biological tissues, offers a non-invasive, label-free and real-time solution for monitoring tissue engineered constructs. This review outlines the fundamentals of bioimpedance, as well as electrical properties of the biological tissues, different types of cell culture constructs and possible electrode configuration set ups for performing bioimpedance measurements on these cell cultures. In addition, various bioimpedance measurement techniques and their applications in the field of tissue engineering are discussed.

Dielectric spectroscopy as a viable biosensing tool for cell and tissue characterization and analysis

The use of dielectric spectroscopy to carry out real time observations of cells and to extract a wealth of information about their physiological properties has expanded in recent years. This popularity is due to the simple, easy to use, non-invasive and real time nature of dielectric spectroscopy. The ease of integrating dielectric spectroscopy with microfluidic devices has allowed the technology to further expand into biomedical research. Dielectric spectra are obtained by applying an electrical signal to cells, which is swept over a frequency range. This review covers the different methods of interpreting dielectric spectra and progress made in applications of impedance spectroscopy for cell observations. First, methods of obtaining specific electrical properties of cells (cell membrane capacitance and cytoplasm conductivity) are discussed. These electrical properties are obtained by fitting the dielectric spectra to different models and equations. Integrating models to reduce the effects of the electrical double layer are subsequently covered. Impedance platforms are then discussed including electrical cell substrate impedance sensing (ECIS). Categories of ECIS systems are divided into microelectrode arrays, interdigitated electrodes and those that allow differential ECIS measurements. Platforms that allow single cell and sub-single cell measurements are then discussed. Finally, applications of impedance spectroscopy in a range of cell observations are elaborated. These applications include observing cell differentiation, mitosis and the cell cycle and cytotoxicity/cell death. Future applications such as drug screening and in point of care applications are then covered.

Nondestructive online in vitro monitoring of pre-osteoblast cell proliferation within microporous polymer scaffolds

We present a system for the online, in vitro, nondestructive monitoring of tissue growth within microporous polymer scaffolds. The system is based on measuring the admittance of the sample over a frequency range of 10-200 MHz using an open-ended coaxial probe and impedance analyzer. The sample admittance is related to the sample complex permittivity (CP) by a quasi-static model of the probe's aperture admittance. A modified effective medium approximation is then used to relate the CP to the cell volume fraction. The change of cell volume fraction is used as a measure of tissue growth inside the scaffold. The system detected relative cell concentration differences between microporous polymer scaffolds seeded with 0.4, 0.45, 0.5, and 0.6 x 10(6) pre-osteoblast cells. In addition, the pre-osteoblast proliferation within 56 scaffolds over 14 days was recorded by the system and a concurrent DNA assay. Both techniques produced cell proliferation curves that corresponded to those found in literature. Thus, our data confirmed that the new system can assess relative cell concentration differences in microporous scaffolds enabling online nondestructive tissue growth monitoring.

Chitosan microchannel scaffolds for tendon tissue engineering characterized using optical coherence tomography

Tendon tissue engineering requires the generation of a uniaxially orientated collagen type I matrix with several organization scales that confer mechanical functionality upon the tendon. A combination of factors in a dose- and time-dependent manner, such as growth factors and mechanical environment, may be the key to an in vitro-engineered tendon. To define the progress of tissue development within a scaffold, on-line systems need to be applied to monitor the newly generated matrix. To address this challenge, we designed a new porous chitosan scaffold with microchannels (diameter: 250 microm), which allows primary porcine tenocytes to proliferate in a bundle-like structure. The cell proliferation and extracellular matrix (ECM) production within the microchannels were successfully assessed under sterile conditions using optical coherence tomography (OCT). A semi-quantitative method that calculated the microchannel occupation ratio (the degree of cell proliferation and tissue turnover based on the total backscattered intensity in the microchannels) was developed. We further investigated the effect of different culture conditions on tendon cell matrix formation. Using a perfusion bioreactor, we demonstrated how fluid flow can increase (p < 1e(3)) ECM production within the microchannels significantly more than static culture. Our study illustrates how using a guiding scaffold in combination with the fast and non-destructive assessment of the microstructure using OCT allows discrimination between the parameters affecting the production and the organization of the ECM.

Biodegradable membrane-covered stent from chitosan-based polymers

Membrane-covered devices could help treat disease of the vasculature such as aneurysm, rupture, and fistulas. They are also investigated to reduce embolic complication associated with revascularization of saphenous vein graft. The aim of this study is to design a clinically applicable biodegradable membrane-covered stent based on the natural polysaccharide chitosan, which has been developed. The mechanical properties of the membrane is optimized through blending with polyethylene oxide (70:30% Wt CH:PEO). The membrane was able to sustain the mechanical deformation of the supporting self-expandable metallic stents during its deployment. The membrane was demonstrated to resist physiological transmural pressure (burst pressure resistance >500 mm Hg) and presented a high-water permeation resistance (1 mL/cm(2) min(-1) at 120 mmHg). The CH-PEO membrane showed a good hemocompatibility in an ex vivo assay. Heparin and hyaluronan surface complexation with the membrane further reduced platelet adhesion by 50.1 and 63% (p = 0.05). The ability of the membrane-covered devices to be used as a drug reservoir was investigated using the nitric oxide donor sodium nitroprusside (SNP). SNP-loaded membranes displayed significantly reduced platelet adhesion.

Biomaterials in Canada: The first four decades

Biomaterials research in Canada began in the 1960s. Over the past four decades significant contributions have been made across a broad spectrum covering dental, orthopaedic, cardiovascular, neuro, and ocular biomaterials. Canadians have also been active in the derivative area of tissue engineering. Biomaterials laboratories are now established in universities and research institutes from coast to coast, supported mainly by funding from the Federal and Provincial Governments. The Canadian Biomaterials Society was formed in 1971 and has played an important role in the development of the field. The Society played host to the 5th World Biomaterials Congress in Toronto in 1996. The work of Canadian researchers over the past four decades is summarized briefly. It is concluded that biomaterials and tissue engineering is a mature, strong area of research in Canada and appears set to continue as such into the future.

Complex permittivity measurement as a new noninvasive tool for monitoring in vitro tissue engineering and cell signature through the detection of cell proliferation, differentiation, and pretissue formation

In in vitro tissue engineering, microporous scaffolds are commonly used to promote cell proliferation and differentiation in three-dimensional structures. Classic measurement methods are particularly time consuming, difficult to handle, and destructive. In this study, a new nondestructive method based on complex permittivity measurement (CPM) is proposed to monitor and track the osteoblast and macrophage differentiation through their morphological variation upon cell attachment and proliferation inside the microporous scaffolds. CPM is performed using a vector network analyzer and a dielectric probe under sterile conditions in a laminar-flow hood. A suitable effective medium approximation (EMA) is applied to fit the data in order to extract the parameters of the different constituents. Our data show that the EMA depolarization factor can be monitored to assess the variation of cell morphology characterizing cell attachment. Discrimination between two batches of scaffolds seeded, respectively, with 2 million and 1 million osteoblast cells is possible; the ratio of their CPM-derived cell volume fractions is in agreement with the ratio of their cell seeding numbers. In addition, cell proliferation inside scaffolds seeded with osteoblasts cultured in alpha minimum essential medium and inside scaffolds seeded with osteoblasts cultured in alpha minimum essential medium supplemented to induce the formation of extracellular matrix is monitored via CPM over several days. CPM-determined cell volume fraction is compared to DNA assay cell counts. Extracellular matrix formation and cell presence was confirmed by scanning electron microscopy. A set of three signature parameters (epsilon'mem, epsilon'cyt, kappa'cyt) characteristic of cell line is extracted from CPM. Distinct signatures are recorded for osteoblasts and macrophages, thus confirming the ability of CPM to discriminate between different cell types. This study demonstrates the potential of CPM as a diagnostic tool to monitor quickly and noninvasively cell growth and differentiation inside microporous scaffolds. Our findings suggest that the use of CPM could be extended to many biomedical applications, such as drug detection and automation of tissue and bacterial cultures in bioreactors.