Reactive oxygen species induced by shear stress mediate cell death in Bacillus subtilis

Pilot-scale production of Bacillus subtilis MSCL 897 spore biomass and antifungal secondary metabolites in a low-cost medium

OBJECTIVES

Bacillus subtilis is a plant growth promoting bacterium (PGPB) that acts as a microbial fertilizer and biocontrol agent, providing benefits such as boosting crop productivity and improving nutrient content. It is able to produce secondary metabolites and endospores simultaneously, enhancing its ability to survive in unfavorable conditions and eliminate competing microorganisms. Optimizing cultivation methods to produce B. subtilis MSCL 897 spores on an industrial scale, requires a suitable medium, typically made from food industry by-products, and optimal temperature and pH levels to achieve high vegetative cell and spore densities with maximum productivity.

RESULTS

This research demonstrates successful pilot-scale (100 L bioreactor) production of a biocontrol agent B. subtilis with good spore yields (1.5 × 109 spores mL-1) and a high degree of sporulation (>80%) using a low-cost cultivation medium. Culture samples showed excellent antifungal activity (1.6-2.3 cm) against several phytopathogenic fungi. An improved methodology for inoculum preparation was investigated to ensure an optimal seed culture state prior to inoculation, promoting process batch-to-batch repeatability. Increasing the molasses concentration in the medium and operating the process in fed-batch mode with additional molasses feed, did not improve the overall spore yield, hence, process operation in batch mode with 10 g molasses L-1 is preferred. Results also showed that the product quality was not significantly impacted for up to 12 months of storage at room temperature.

CONCLUSION

An economically-feasible process for B. subtilis-based biocontrol agent production was successfully developed at the pilot scale.

Arabinose Plays an Important Role in Regulating the Growth and Sporulation of Bacillus subtilis NCD-2

A microbial fungicide developed from Bacillus subtilis NCD-2 has been registered for suppressing verticillium wilt in crops in China. Spores are the main ingredient of this fungicide and play a crucial role in suppressing plant disease. Therefore, increasing the number of spores of strain NCD-2 during fermentation is important for reducing the cost of the fungicide. In this study, five kinds of carbon sources were found to promote the metabolism of strain NCD-2 revealed via Biolog Phenotype MicroArray (PM) technology. L-arabinose showed the strongest ability to promote the growth and sporulation of strain NCD-2. L-arabinose increased the bacterial concentration and the sporulation efficiency of strain NCD-2 by 2.04 times and 1.99 times compared with D-glucose, respectively. Moreover, L-arabinose significantly decreased the autolysis of strain NCD-2. Genes associated with arabinose metabolism, sporulation, spore resistance to heat, and spore coat formation were significantly up-regulated, and genes associated with sporulation-delaying protein were significantly down-regulated under L-arabinose treatment. The deletion of msmX, which is involved in arabinose transport in the Bacillus genus, decreased growth and sporulation by 53.71% and 86.46% compared with wild-type strain NCD-2, respectively. Complementing the mutant strain by importing an intact msmX gene restored the strain's growth and sporulation.

Quantifiable Relationship Between Antibacterial Efficacy and Electro-Mechanical Intervention on Nanowire Arrays

Physical disruption is an important antibacterial means as it is lethal to bacteria without spurring antimicrobial resistance. However, it is very challenging to establish a quantifiable relationship between antibacterial efficacy and physical interactions such as mechanical and electrical forces. Herein, titanium nitride (TN) nanowires with adjustable orientations and capacitances are prepared to exert gradient electro-mechanical forces on bacteria. While vertical nanowires show the strongest mechanical force resulting in an antibacterial efficiency of 0.62 log reduction (vs 0.22 for tiled and 0.36 for inclined nanowires, respectively), the addition of electrical charges maximizes the electro-mechanical interactions and elevates the antibacterial efficacy to more than 3 log reduction. Biophysical and biochemical analyses indicate that electrostatic attraction by electrical charge narrows the interface. The electro-mechanical intervention more easily stiffens and rips the bacteria membrane, disturbing the electron balance and generating intracellular oxidative stress. The antibacterial ability is maintained in vivo and bacteria-challenged rats are protected from serious infection. The physical bacteria-killing process demonstrated here can be controlled by adjusting the electro-mechanical interactions. Overall, these results revealed important principles for rationally designing high-performance antibacterial interfaces for clinical applications.

Research Progress on the Effect of Autolysis to Bacillus subtilis Fermentation Bioprocess

Bacillus subtilis is a gram-positive bacterium, a promising microorganism due to its strong extracellular protein secretion ability, non-toxic, and relatively mature industrial fermentation technology. However, cell autolysis during fermentation restricts the industrial application of B. subtilis. With the fast advancement of molecular biology and genetic engineering technology, various advanced procedures and gene editing tools have been used to successfully construct autolysis-resistant B. subtilis chassis cells to manufacture various biological products. This paper first analyses the causes of autolysis in B. subtilis from a mechanistic perspective and outlines various strategies to address autolysis in B. subtilis. Finally, potential strategies for solving the autolysis problem of B. subtilis are foreseen.

The optimization of centrifugal pump driving horizontal tubular photobioreactor for enhancing astaxanthin production using heterotrophic Haematococcus pluvialis

Haematococcus pluvialis is the prime source of natural astaxanthin for commercial exploitation. The large-scale cultivation of H. pluvialis is one of the key technologies for the development of natural astaxanthin industry. So far, horizontal tubular photobioreactor (HTPBR) circulated by a centrifugal pump has been the main PBR for the large-scale cultivation of H. pluvialis. Shear stress is a negative factor in microalgal cultivation at different scales, particularly for large-scale cultivation. To reduce the adverse impact of shear stress, the tolerance of H. pluvialis to the shear stress during the induction stage was first investigated in this study. H. pluvialis aplanospore was not sensitive to stresses between 19.18 and 27.32 Pa, but was resulted in about 30% cell death under shear stress between 27.32 and 63.84 Pa. Accordingly, two centrifugal pumps with different impellers was selected in 400 L HTPBRs to study the outdoor photoinduction for astaxanthin accumulation. The highest astaxanthin productivity and astaxanthin concentration were obtained in HTPBRs using a centrifugal pump equipped with three unshrouded backward-bladed impellers. The HTPBR was then successfully scaled up to 800 L with a similar performance, showing good scalability.

Physical collection and viability of airborne bacteria collected under electrostatic field with different sampling media and protocols towards rapid detection

Electrostatic samplers have been increasingly studied for sampling of viral and bacterial aerosols, and bioaerosol samplers are required to provide concentrated liquid samples with high physical collection and biological recovery, which would be critical for rapid detection. Here, the effects of sampling media and protocols on the physical collection and biological recovery of two airborne bacteria (Pseudomonas fluorescens and Micrococcus luteus) under electrostatic field were investigated using a personal electrostatic particle concentrator (EPC). Deionized (DI) water with/without sodium dodecyl sulfate (SDS) and phosphate buffered saline were tested as sampling media. A polystyrene container was mounted onto the collection electrode of the EPC for stable storage and vortexing after capture. Many bacterial cells were found to be deposited on the bottom surface of the container submerged in the media via electrophoresis, and among the tested sampling protocols, wet sampling with a container and subsequent vortexing offered the most bacteria in the collection suspension. Experiments with several sampling media showed that 0.001-0.01% SDS-DI water demonstrated the highest recovery rate in the EPC. These findings would be valuable in the field of sampling and subsequent rapid detection of bioaerosols.

Protruding Nanostructured Surfaces for Antimicrobial and Osteogenic Titanium Implants

Protruding nanostructured surfaces have gained increasing interest due to their unique wetting behaviours and more recently their antimicrobial and osteogenic properties. Rapid development in nanofabrication techniques that offer high throughput and versatility on titanium substrate open up the possibility for better orthopaedic and dental implants that deter bacterial colonisation while promoting osteointegration. In this review we present a brief overview of current problems associated with bacterial infection of titanium implants and of efforts to fabricate titanium implants that have both bactericidal and osteogenic properties. All of the proposed mechano-bactericidal mechanisms of protruding nanostructured surfaces are then considered so as to explore the potential advantages and disadvantages of adopting such novel technologies for use in future implant applications. Different nanofabrication methods that can be utilised to fabricate such nanostructured surfaces on titanium substrate are briefly discussed.

Printing-induced cell injury evaluation during laser printing of 3T3 mouse fibroblasts

Three-dimensional bioprinting has emerged as a promising solution for the freeform fabrication of living cellular constructs, which can be used for tissue/organ transplantation and tissue models. During bioprinting, some living cells are unavoidably injured and may become necrotic or apoptotic cells. This study aims to investigate the printing-induced cell injury and evaluates injury types of post-printing cells using the annexin V/7-aminoactinomycin D and FAM-DEVD-FMK/propidium iodide assays during laser printing of NIH 3T3 mouse fibroblasts. As observed, the percentage of post-printing early apoptotic mouse fibroblasts increases with the incubation time, indicating that post-printing apoptotic mouse fibroblasts have different initiation lag times of apoptosis due to different levels of mechanical stress exerted during laser printing. Post-printing necrotic mouse fibroblasts can be detected immediately after printing, while post-printing early apoptotic mouse fibroblasts need time to develop into a late apoptotic stage. The minimum time needed for post-printing early apoptotic mouse fibroblasts to complete their apoptosis pathway and transition into late apoptotic mouse fibroblasts is from 4 h to 5 h post-printing. The resulting knowledge of the evolution of different apoptotic post-printing mouse fibroblasts will help better design future experiments to quantitatively determine, model, and mitigate the post-printing cell injury based on molecular signal pathway modeling.

Bactericidal Effects of Natural Nanotopography of Dragonfly Wing on Escherichia coli

Nanotextured surfaces (NTSs) are critical to organisms as self-adaptation and survival tools. These NTSs have been actively mimicked in the process of developing bactericidal surfaces for diverse biomedical and hygiene applications. To design and fabricate bactericidal topographies effectively for various applications, understanding the bactericidal mechanism of NTS in nature is essential. The current mechanistic explanations on natural bactericidal activity of nanopillars have not utilized recent advances in microscopy to study the natural interaction. This research reveals the natural bactericidal interaction between E. coli and a dragonfly wing's (Orthetrum villosovittatum) NTS using advanced microscopy techniques and proposes a model. Contrary to the existing mechanistic models, this experimental approach demonstrated that the NTS of Orthetrum villosovittatum dragonfly wings has two prominent nanopillar populations and the resolved interface shows membrane damage occurred without direct contact of the bacterial cell membrane with the nanopillars. We propose that the bacterial membrane damage is initiated by a combination of strong adhesion between nanopillars and bacterium EPS layer as well as shear force when immobilized bacterium attempts to move on the NTS. These findings could help guide the design of novel biomimetic nanomaterials by maximizing the synergies between biochemical and mechanical bactericidal effects.

Magnetically-induced elimination of Staphylococcus aureus by magnetotactic bacteria under a swing magnetic field

This study aims to explore a therapeutic tool that kills pathogens by using mechanical force other than temperature. We fabricated a device that generates a swing magnetic field (sMF) with low-heat production and then evaluated the killing effect of magnetotactic bacteria MO-1 on Staphylococcus aureus (S. aureus) under the sMF. S. aureus was only killed under the sMF when attached to MO-1 cells. The killing efficiency increased with increasing attachment ratio of MO-1 cells to S. aureus. Treatment with antibody-coated MO-1 cells under the sMF improved the healing of S. aureus-infected wound. The theoretical analysis demonstrated that MO-1 cells generated a mechanical force of approximately 8kPa under the sMF, thereby exerting on S. aureus and inducing cell death. The proposed platform, which uses magnetotactic bacteria under the sMF to generate mechanical force, provides a basis for development of therapeutic tools to treat infectious diseases.

A component of gamma-radiation-induced cell death in E. coli is programmed and interlinked with activation of caspase-3 and SOS response

The current study deals with the molecular mechanism of radiation-induced cell death (RICD) in Escherichia coli. Irradiated E. coli cells displayed markers similar to those found in eukaryotic programmed cell death (PCD) such as caspase-3 activation and phosphatidylserine externalization. RICD was found to be suppressed upon pretreatment with sublethal concentrations of rifampicin or chloramphenicol, indicating the requirement of de novo gene expression. RICD was also found to be inhibited by cell permeable inhibitors of caspase-3 or poly (ADP-ribose) polymerase, indicating the involvement of PCD during RICD in E. coli. Radiation-induced SOS response was alleviated as observed with decrease in LexA level and also reduced cell filamentation frequency in the presence of caspase inhibitor. Further, the inhibitor-mediated rescue was not observed in single-gene knockouts of umuC, umuD, recB and ruvA, the genes which are associated with SOS response. This implies a linkage between SOS response and PCD in radiation-exposed E. coli cells.

Stress induced lipid production in Chlorella vulgaris: relationship with specific intracellular reactive species levels

Microalgae have significant potential to be an important alternative energy source, but the challenges to the commercialization of bio-oil from microalgae need to be overcome for the potential to be realized. The application of stress can be used to improve bio-oil yields from algae. Nevertheless, the understanding of stress effects is fragmented due to the lack of a suitable, direct quantitative marker for stress. The lack of understanding seems to have limited the development of stress based strategies to improve bio-oil yields, and hence the commercialization of microalgae-based bio-oil. In this study, we have proposed and used the specific intracellular reactive species levels (siROS) particularly hydroxyl and superoxide radical levels, separately, as direct, quantitative, markers for stress, irrespective of the type of stress induced. Although ROS reactions are extremely rapid, the siROS level can be assumed to be at pseudo-steady state compared to the time scales of metabolism, growth and production, and hence they can be effective stress markers at particular time points. Also, the specific intracellular (si-) hydroxyl and superoxide radical levels are easy to measure through fluorimetry. Interestingly, irrespective of the conditions employed in this study, that is, nutrient excess/limitation or different light wavelengths, the cell concentrations are correlated to the siROS levels in an inverse power law fashion. The composite plots of cell concentration (y) and siROS (x) yielded the correlations of y = k1  · x(-0.7) and y = k2  · x(-0.79) , for si-hydroxyl and si-superoxide radical levels, respectively. The specific intracellular (si-) neutral lipid levels, which determine the bio-oil productivity, are related in a direct power law fashion to the specific hydroxyl radical levels. The composite plot of si-neutral lipid levels (z) and si-hydroxyl radical level (x) yielded a correlation of z = k3  · x(0.65) . More interestingly, a nutrient shift caused a significant change in the sensitivity of neutral lipid accumulation to the si-hydroxyl radical levels.

Oxidative stress parameters and anti-apoptotic response to hydroxyl radicals in fish erythrocytes: protective effects of glutamine, alanine, citrulline and proline

The present study explored the protective effects of glutamine (Gln), alanine (Ala), citrulline (Cit) and proline (Pro) on hydroxyl radical (·OH)-induced apoptosis in isolated carp erythrocytes. Hydroxyl radicals were generated by ferrous ion (Fe(2+))-mediated decomposition of hydrogen peroxide (H(2)O(2)) (Fenton reaction). In order to select an optimal ·OH concentration to induce apoptosis, cultures were treated with different concentrations of FeSO(4)/H(2)O(2) (0 μM/0 μM-50 μM/25 μM). The results showed that exposure to FeSO(4)/H(2)O(2) (0 μM/0 μM-40 μM/20 μM) increased apoptosis in a dose-dependent manner. Moreover, apoptosis was at its highest level at 40 μM FeSO(4)/20 μM H(2)O(2). We then examined the cytoprotective effects of Gln, Ala, Cit, Pro or the combination of Ala, Cit and Pro under conditions of apoptosis. Carp erythrocytes were treated with the substances listed above in the presence of 40 μM FeSO(4)/20 μM H(2)O(2) for 9 h. The controls were grown in Gln, Ala, Cit, Pro-free culture medium. The results showed that Gln, Ala, Cit, Pro and the combination of Ala, Cit and Pro effectively protected against annexin binding, decrease of forward scatter and DNA fragmentation in carp erythrocytes induced by ·OH. Furthermore, Gln, Ala, Cit, Pro and the combination of Ala, Cit and Pro effectively blocked ·OH-stimulated erythrocyte hemolysis, reduced the increase of superoxide anion and H(2)O(2) concentrations, inhibited the formation of malondialdehyde, protein carbonyls and met-hemoglobin, and prevented the decrease of superoxide dismutase, catalase and glutathione peroxidase activities and glutathione content in carp erythrocytes induced by ·OH. In addition, the results suggest that the combination of Ala, Cit and Pro produces a greater anti-apoptotic and anti-oxidative effect than their individual effects at the same concentrations. Taken together, the results showed that ·OH induces apoptosis and oxidative damage in carp erythrocytes. In addition to inhibiting apoptosis, Gln, Ala, Cit, Pro and the combination of Ala, Cit and Pro protected carp erythrocytes against oxidative damage induced by ·OH, which may be a major factor in the protection of erythrocytes from apoptosis.

Antibacterial activity of ZnO nanoparticles with a modified surface under ambient illumination

In various practical applications, nanomaterials typically have functionalized surfaces. Yet, the studies of toxicity and antibacterial activity of functionalized nanoparticles are scarce. We investigated the effect of surface modifications on antibacterial activity of ZnO under ambient illumination, and we found that nanoparticles coated with different surface modifying reagents could exhibit higher or lower toxicity compared to bare ZnO, depending on the surface modifying reagent used. Different surface modifying reagent molecules resulted in differences in the release of Zn(2+) ions and the production of reactive oxygen species (ROS). However, the antibacterial activity did not correlate with the ROS levels or the Zn(2+) ion release. One of the surface-modified ZnO samples exhibited significantly lower Zn(2+) ion release while at the same time exhibiting improved antibacterial activity. In all cases, damage of the cell wall membranes and/or changes in the membrane permeability have been observed, together with the changes in ATR-FTIR spectra indicating differences in protein conformation. Mechanisms of antibacterial activity are discussed.

A microfluidic platform for rapid, stress-induced antibiotic susceptibility testing of Staphylococcus aureus

The emergence and spread of bacterial resistance to ever increasing classes of antibiotics intensifies the need for fast phenotype-based clinical tests for determining antibiotic susceptibility. Standard susceptibility testing relies on the passive observation of bacterial growth inhibition in the presence of antibiotics. In this paper, we present a novel microfluidic platform for antibiotic susceptibility testing based on stress-activation of biosynthetic pathways that are the primary targets of antibiotics. We chose Staphylococcus aureus (S. aureus) as a model system due to its clinical importance, and we selected bacterial cell wall biosynthesis as the primary target of both stress and antibiotic. Enzymatic and mechanical stresses were used to damage the bacterial cell wall, and a β-lactam antibiotic interfered with the repair process, resulting in rapid cell death of strains that harbor no resistance mechanism. In contrast, resistant bacteria remained viable under the assay conditions. Bacteria, covalently-bound to the bottom of the microfluidic channel, were subjected to mechanical shear stress created by flowing culture media through the microfluidic channel and to enzymatic stress with sub-inhibitory concentrations of the bactericidal agent lysostaphin. Bacterial cell death was monitored via fluorescence using the Sytox Green dead cell stain, and rates of killing were measured for the bacterial samples in the presence and absence of oxacillin. Using model susceptible (Sanger 476) and resistant (MW2) S. aureus strains, a metric was established to separate susceptible and resistant staphylococci based on normalized fluorescence values after 60 min of exposure to stress and antibiotic. Because this ground-breaking approach is not based on standard methodology, it circumvents the need for minimum inhibitory concentration (MIC) measurements and long wait times. We demonstrate the successful development of a rapid microfluidic-based and stress-activated antibiotic susceptibility test by correctly designating the phenotypes of 16 additional clinically relevant S. aureus strains in a blinded study. In addition to future clinical utility, this method has great potential for studying the effects of various stresses on bacteria and their antibiotic susceptibility.

Adhesion forces between Staphylococcus epidermidis and surfaces bearing self-assembled monolayers in the presence of model proteins

Self-assembled monolayers (SAMs) are being developed into coatings to reduce microbial biofilm formation on biomaterials. To test anti-adhesion properties, SAMs can be easily constructed on gold, and used to represent a coated biomaterial. However, coatings that prevent bacterial adhesion must also resist protein adsorption. We explored the competitive effects of bacteria and protein for adsorption to SAMs, choosing fetal bovine serum (FBS) to represent protein non-specific binding, and fibronectin (FN) to evaluate ligand/receptor binding. Staphylococcus epidermidis were immobilized on an atomic force microscope (AFM) tip and used as a force probe to detect the interaction forces between bacteria and gold-coated SAMs. The SAMs tested were alkanethiol molecules terminating in isophthalic acid (IPA) or isophthalic acid with silver (IAG). While S. epidermidis showed weak interactions with FBS, the bacteria showed strong adhesion with FN, due to ligand/receptor binding. Bacterial retention and viability experiments were correlated with the force measurements. S. epidermidis interacting with IAG SAMs showed a loss of viability, due to the mobility of silver ions. For most substrata, there was a link between high adhesion forces with bacteria and a high percentage of dead cells being retained on that substratum (even in the absence of a specific biocidal effect, such as silver). This may suggest that high adhesion forces can cause stress to the bacteria which contributed to their death. The relationship between highly adhesive SAMs and bacterial inactivation may be useful in future biomaterial design. When evaluating coatings for biomaterials, it is important to consider the interplay between bacteria, proteins, and the coating material.

Living with heterogeneities in bioreactors: understanding the effects of environmental gradients on cells

The presence of spatial gradients in fundamental culture parameters, such as dissolved gases, pH, concentration of substrates, and shear rate, among others, is an important problem that frequently occurs in large-scale bioreactors. This problem is caused by a deficient mixing that results from limitations inherent to traditional scale-up methods and practical constraints during large-scale bioreactor design and operation. When cultured in a heterogeneous environment, cells are continuously exposed to fluctuating conditions as they travel through the various zones of a bioreactor. Such fluctuations can affect cell metabolism, yields, and quality of the products of interest. In this review, the theoretical analyses that predict the existence of environmental gradients in bioreactors and their experimental confirmation are reviewed. The origins of gradients in common culture parameters and their effects on various organisms of biotechnological importance are discussed. In particular, studies based on the scale-down methodology, a convenient tool for assessing the effect of environmental heterogeneities, are surveyed.

Indentation probing of human articular cartilage: Effect on chondrocyte viability

BACKGROUND

Clinical arthroscopic probes based on indentation testing are being developed. However, the biological effects of certain design parameters (i.e., tip geometry and size) and loading protocols (i.e., indentation depth, rate, and repetition) on human articular cartilage are unclear.

OBJECTIVE

Determine if indenter design and indentation protocol modulate mechanical injury of probed cartilage samples.

METHODS

The objectives of this study were to determine the effects of indentation testing using clinically applicable tips (0.4mm radius, plane- or sphere-ended) and protocols (indentation depths of 100, 200, or 300 microm, applied at a rate of 50 or 500 microm/s) on the extent and the pattern of chondrocyte death, should it occur. Grossly normal osteochondral blocks were harvested from human talar dome, indented, stained with live/dead dyes, and imaged en face on a fluorescence microscope.

RESULTS

The occurrence and the extent of cell death generally increased with indentation depth, being undetected at an indentation depth of 100 microm but marked at 300 microm. In addition, tip geometry affected the pattern of cell death: ring- and solid circle-shaped areas of cell deaths were apparent when compressed to 300 microm using plane- and sphere-ended indenters.

CONCLUSION

Indenter design and indentation protocol modulated the extent and the pattern of chondrocyte death. These results have implications for designing indentation probes and protocols, as well as clinicians performing arthroscopic probing.

Responses of the photosynthetic machinery ofSpirulina maxima to induced reactive oxygen species

The photosynthetic machinery of Spirulina maxima was studied when subjected to induced reactive oxygen species (ROS) to examine the organism's responses to stress. Significant decreases in both photosynthetic efficiency and growth rate were observed. Exposure to 0.01 mmol H(2)O(2)/(g cell), which induced the lowest specific intracellular ROS level (siROS) led to a 15% decrease in specific growth rate; an increase in siROS by 70-fold led to a 25% decrease in specific growth rate. Similarly, siROS induced by 0.01 mmol H(2)O(2)/(g cell) led to 15% inhibition in photosynthetic efficiency, while an increase in siROS by 40- or 70-fold led to about 60% inhibition in photosynthetic efficiency. To further understand the effects of induced ROS on photosynthetic machinery, we performed a detailed pigmentation analysis as well as analyzed Phycobilisomes (PBS), Photosystem II (PSII), and Photosystem I (PSI), the three important components of cyanobacterial photosynthetic apparatus. We found carotenoids (beta-carotene and lutein) to be most sensitive to siROS. Also, specific levels of phycocyanin and allophycocyanin, which are important PBS pigments, decreased significantly in response to H(2)O(2). Further, electron transport assays revealed that ROS cause damage primarily to PSII, whereas they do not significantly affect PSI in comparison; siROS induced by 0.01 mmol H(2)O(2)/(g cell) led to a 15% inhibition of PSII, and increase in siROS by 9-, 40-, and 70-fold led to 22%, 36%, and 46% inhibition, respectively.