Effects of doxycycline on articular cartilage GAG release and mechanical properties following impact

A Single Axial Impact Load Causes Articular Damage That Is Not Visible with Micro-Computed Tomography: An Ex Vivo Study on Caprine Tibiotalar Joints

OBJECTIVE

Excessive articular loading, for example, an ankle sprain, may result in focal osteochondral damage, initiating a vicious degenerative process resulting in posttraumatic osteoarthritis (PTOA). Better understanding of this degenerative process would allow improving posttraumatic care with the aim to prevent PTOA. The primary objective of this study was to establish a drop-weight impact testing model with controllable, reproducible and quantitative axial impact loads to induce osteochondral damage in caprine tibiotalar joints. We aimed to induce osteochondral damage on microscale level of the tibiotalar joint without gross intra-articular fractures of the tibial plafond.

DESIGN

Fresh-frozen tibiotalar joints of mature goats were used as ex vivo articulating joint models. Specimens were axially impacted by a mass of 10.5 kg dropped from a height of 0.3 m, resulting in a speed of 2.4 m/s, an impact energy of 31.1 J and an impact impulse of 25.6 N·s. Potential osteochondral damage of the caprine tibiotalar joints was assessed using contrast-enhanced high-resolution micro-computed tomography (micro-CT). Subsequently, we performed quasi-static loading experiments to determine postimpact mechanical behavior of the tibiotalar joints.

RESULTS

Single axial impact loads with a mass of 15.5 kg dropped from 0.3 m, resulted in intra-articular fractures of the tibial plafond, where a mass of 10.55 kg dropped from 0.3 m did not result in any macroscopic damage. In addition, contrast-enhanced high-resolution micro-CT imaging neither reveal any acute microdamage (i.e., microcracks) of the subchondral bone nor any (micro)structural changes in articular cartilage. The Hexabrix content or voxel density (i.e., proteoglycan content of the articular cartilage) on micro-CT did not show any differences between intact and impacted specimens. However, quasi-static whole-tibiotalar-joint loading showed an altered biomechanical behavior after application of a single axial impact (i.e., increased hysteresis when compared with the intact or nonimpacted specimens).

CONCLUSIONS

Single axial impact loads did not induce osteochondral damage visible with high-resolution contrast-enhanced micro-CT. However, despite the lack of damage on macro- and even microscale, the single axial impact loads resulted in "invisible injuries" because of the observed changes in the whole-joint biomechanics of the caprine tibiotalar joints. Future research must focus on diagnostic tools for the detection of early changes in articular cartilage after a traumatic impact (i.e., ankle sprains or ankle fractures), as it is well known that this could result in PTOA.

Polymer particles for the intra-articular delivery of drugs to treat osteoarthritis

Osteoarthritis (OA) is a leading cause of chronic disability. It is a progressive disease, involving pathological changes to the entire joint, resulting in joint pain, stiffness, swelling, and loss of mobility. There is currently no disease-modifying pharmaceutical treatment for OA, and the treatments that do exist suffer from significant side effects. An increasing understanding of the molecular pathways involved in OA is leading to many potential drug targets. However, both current and new therapies can benefit from a targeted approach that delivers drugs selectively to joints at therapeutic concentrations, while limiting systemic exposure to the drugs. Delivery systems including hydrogels, liposomes, and various types of particles have been explored for intra-articular drug delivery. This review will describe progress over the past several years in the development of polymer-based particles for OA treatment, as well as their in vitro, in vivo, and clinical evaluation. Systems based on biopolymers such as polysaccharides and polypeptides, as well as synthetic polyesters, poly(ester amide)s, thermoresponsive polymers, poly(vinyl alcohol), amphiphilic polymers, and dendrimers will be described. We will discuss the role of particle size, biodegradability, and mechanical properties in the behavior of the particles in the joint, and the challenges to be addressed in future research.

Harnessing biomechanics to develop cartilage regeneration strategies

As this review was prepared specifically for the American Society of Mechanical Engineers H.R. Lissner Medal, it primarily discusses work toward cartilage regeneration performed in Dr. Kyriacos A. Athanasiou's laboratory over the past 25 years. The prevalence and severity of degeneration of articular cartilage, a tissue whose main function is largely biomechanical, have motivated the development of cartilage tissue engineering approaches informed by biomechanics. This article provides a review of important steps toward regeneration of articular cartilage with suitable biomechanical properties. As a first step, biomechanical and biochemical characterization studies at the tissue level were used to provide design criteria for engineering neotissues. Extending this work to the single cell and subcellular levels has helped to develop biochemical and mechanical stimuli for tissue engineering studies. This strong mechanobiological foundation guided studies on regenerating hyaline articular cartilage, the knee meniscus, and temporomandibular joint (TMJ) fibrocartilage. Initial tissue engineering efforts centered on developing biodegradable scaffolds for cartilage regeneration. After many years of studying scaffold-based cartilage engineering, scaffoldless approaches were developed to address deficiencies of scaffold-based systems, resulting in the self-assembling process. This process was further improved by employing exogenous stimuli, such as hydrostatic pressure, growth factors, and matrix-modifying and catabolic agents, both singly and in synergistic combination to enhance neocartilage functional properties. Due to the high cell needs for tissue engineering and the limited supply of native articular chondrocytes, costochondral cells are emerging as a suitable cell source. Looking forward, additional cell sources are investigated to render these technologies more translatable. For example, dermis isolated adult stem (DIAS) cells show potential as a source of chondrogenic cells. The challenging problem of enhanced integration of engineered cartilage with native cartilage is approached with both familiar and novel methods, such as lysyl oxidase (LOX). These diverse tissue engineering strategies all aim to build upon thorough biomechanical characterizations to produce functional neotissue that ultimately will help combat the pressing problem of cartilage degeneration. As our prior research is reviewed, we look to establish new pathways to comprehensively and effectively address the complex problems of musculoskeletal cartilage regeneration.

In vitro and in vivo evaluation of doxycycline-chondroitin sulfate/PCLmicrospheres for intraarticular treatment of osteoarthritis

Osteoarthritis (OA) is a degenerative joint disease, which has no complete treatment with medication yet. Intraarticular hyaluronan (HA) injection can decrease pain and modify the natural course of OA. This study was designed to provide long term delivery of an MMP (matrix-metalloproteinase) inhibitor agent-doxycycline, together with matrix regenerative agent-chondroitin sulfate for treating OA which progress with matrix degenerations. Doxycycline (D) and doxycycline-chondroitin sulfate (D-CS) loaded poly-ɛ-caprolactone (PCL) microspheres (MS) were prepared as intraarticular delivery systems. Bio-effectiveness of developed microspheres was first evaluated with three-dimensional in vitro model of OA where both MS showed significant reduction in MMP-13 levels compared to untreated OA-chondrocytes at 15 and 24 days. Significant decrease was observed in GAG release into the media for both D MS and D-CS MS treated groups at 15 and 24 days. Second, the microspheres were injected to rabbit knee in hyaluronan (HA) to evaluate the effectiveness of the treatment. Radiographic scores of D MS and D-CS MS groups improved after 8 weeks when compared to OA group. Mankin-Pitzker histological scores similarly showed improvement with D MS and D-CSMS groups when compared to OA group. Ex vivo hardness tests of cartilages demonstrated superior hardness values with both doses of D-CSMS compared to OA group. D MS showed promising improvement of OA in histology results. Although, both MS groups had similar effects on cells in the in vitro model, D-CSMS had a positive contribution on all in vivo treatment outcomes and showed potential as a new strategy for treatment when applied to OA knee joints.

Effects of hydrostatic pressure on biosynthetic activity during chondrogenic differentiation of MSCs in hybrid scaffolds

The objective of this study was to determine the effects of hydrostatic pressure (HP) on the biochemical properties and gene expression of mesenchymal stem cells (MSCs) on scaffolds for cartilage tissue engineering composed of poly(caprolactone) (PCL) poly(vinyl alcohol) (PVA) gelatin (GEL) semi interpenetrating polymer network (semi-IPN). The MSCs were cultured on PCL-PVA-GEL semi-IPN scaffolds in two groups (A and B) for 7 and 21 days, respectively, and then loaded with hydrostatic pressure (5 MPa, 0.5 Hz) for 2 h per day for the period of 7 days and compared with two non-loaded groups (C and D) as controls. DMMB and real-time PCR analysis for assaying cartilage-specific extracellular matrix (ECM) gene markers were carried out. According to the results, there were no significant differences in GAG amounts between the loaded and non-loaded constructs were observed after 14 days. However, significant and considerable increases in the expression amount of type II collagen mRNA levels in group A ( from 2.43 × 10-4 ± 5.32 × 10-5 to 2.09 × 10-3 ± 1.07 × 10-4 time), and in group B (from 3.04 × 10-4 ± 4.31 × 10-5 to 2.08 × 10-3 ± 1.59 × 10-4 time) in comparison with non-loaded groups (C and D) were observed, respectively. Results showed the beneficial role of hydrostatic pressure on the increase of type II collagen mRNA levels in articular cartilage tissue engineering.

An assessment of the chondroprotective effects of intra-articular application of statin and tetracycline on early-stage experimental osteoarthritis

Objectives. To compare the effects of intra-articular application of statin and tetracyclines on cartilage and synovial tissue on experimental osteoarthritis. Methods. Osteoarthritis was created in 30 rabbits of 3 groups. The control group received saline intra-articularly, statin group, atorvastatin and the tetracycline group, doxycycline once a week for 3 weeks. Chondral and synovial tissues were evaluated macroscopically and histopathologically. Results. Macroscopic evaluation determined mean values of control group 3.0, statin group 0.56, and tetracycline group 2.5. Histopathological evaluations determined mean values; femoral medial condyle cartilage tissue, control group, 14.60 ± 1.00, statin group 2.20 ± 1.30, tetracycline group 12.7 ± 5.39: tibia medial plateau, control group, 14.33 ± 8.68, statin group 2.89 ± 1.96, tetracycline group, 15.90 ± 7.03: synovial tissue, control group 12.22 ± 3.63, statin group 4.33 ± 2.69, tetracycline group 10.70 ± 2.62. Average values of synovial tissue cell layer thickness were control group 14.46 ± 2.35 μm, statin group 10.56 ± 1.01 μm, tetracycline group 12.80 ± 0.79 μm. All measurements showed statistically significant differences between statin and control groups (P < 0.05) but not between tetracycline and control groups (P > 0.05). Conclusions. Tetracycline has little effect due to chemical modification requirement, and the effect is dose dependent. Statins have chondroprotective effects, so may become a novel therapeutic agent in osteoarthritis management after chemical processing.