Modification of macroporous titanium tracheal implants with biodegradable structures: tracking in vivo integration for determination of optimal in situ epithelialization conditions

Challenges and Opportunities in Developing Tracheal Substitutes for the Recovery of Long-Segment Defects

Tracheal resection and reconstruction procedures are necessary when stenosis, tracheomalacia, tumors, vascular lesions, or tracheal injury cause a tracheal blockage. Replacement with a tracheal substitute is often recommended when the trauma exceeds 50% of the total length of the trachea in adults and 30% in children. Recently, tissue engineering and other advanced techniques have shown promise in fabricating biocompatible tracheal substitutes with physical, morphological, biomechanical, and biological characteristics similar to native trachea. Different polymers and biometals are explored. Even with limited success with tissue-engineered grafts in clinical settings, complete healing of tracheal defects remains a substantial challenge due to low mechanical strength and durability of the graft materials, inadequate re-epithelialization and vascularization, and restenosis. This review has covered a range of reconstructive and regenerative techniques, design criteria, the use of bioprostheses and synthetic grafts for the recovery of tracheal defects, as well as the traditional and cutting-edge methods of their fabrication, surface modification for increased immuno- or biocompatibility, and associated challenges.

Progress in Surface Modification of Titanium Implants by Hydrogel Coatings

Although titanium and titanium alloys have become the preferred materials for various medical implants, surface modification technology still needs to be strengthened in order to adapt to the complex physiological environment of the human body. Compared with physical or chemical modification methods, biochemical modification, such as the introduction of functional hydrogel coating on implants, can fix biomolecules such as proteins, peptides, growth factors, polysaccharides, or nucleotides on the surface of the implants, so that they can directly participate in biological processes; regulate cell adhesion, proliferation, migration, and differentiation; and improve the biological activity on the surface of the implants. This review begins with a look at common substrate materials for hydrogel coatings on implant surfaces, including natural polymers such as collagen, gelatin, chitosan, and alginate, and synthetic materials such as polyvinyl alcohol, polyacrylamide, polyethylene glycol, and polyacrylic acid. Then, the common construction methods of hydrogel coating (electrochemical method, sol-gel method and layer-by-layer self-assembly method) are introduced. Finally, five aspects of the enhancement effect of hydrogel coating on the surface bioactivity of titanium and titanium alloy implants are described: osseointegration, angiogenesis, macrophage polarization, antibacterial effects, and drug delivery. In this paper, we also summarize the latest research progress and point out the future research direction. After searching, no previous relevant literature reporting this information was found.

Titanium surface modifications and their soft-tissue interface on nonkeratinized soft tissues-A systematic review (Review)

In this systematic review, the authors explored the surface aspects of various titanium (Ti) or Ti alloy medical implants, examining the interface formed between the implant and surrounding nonkeratinized soft tissues (periosteum, muscles, tendons, fat, cicatrix, or dura mater). A comprehensive search undertaken in July 2019 used strict keywords in relevant electronic databases to identify relevant studies. Based on the authors' inclusion criteria (restricted to in vivo studies), 19 of 651 publications qualified, all pertaining to animal models. The syrcle's risk of bias tool for animal studies was applied at study level. Given the broad nature of the reported results and the many different parameters measured, the articles under scrutiny were assigned to five research subgroups according to their surface modification types: mechanical surface modifications, oxidative processes (e.g., acid etching, anodization, microarc oxidation), sol-gel derived titania (TiO₂) coatings, biofunctionalized surfaces, and a subgroup for other modifications. The primary outcome was a liquid space at the interface (e.g., seroma formation) that was reported in six studies. Machining Ti implants to a roughness between R_a = 0.5 and 1.0 μm was shown to induce soft-tissue adhesion. Smoother surfaces, with the exception of acid polished and anodized Ti (R_a = 0.2 μm), prevented soft-tissue adhesion. A fibroblast growth factor 2 apatite composite coating promoted soft-tissue attachment via Sharpey-like fibers. In theory, this implant-soft tissue interface could be nearly perfect.

Review: the potential impact of surface crystalline states of titanium for biomedical applications

In many biomedical applications, titanium forms an interface with tissues, which is crucial to ensure its long-term stability and safety. In order to exert control over this process, titanium implants have been treated with various methods that induce physicochemical changes at nano and microscales. In the past 20 years, most of the studies have been conducted to see the effect of topographical and physicochemical changes of titanium surface after surface treatments on cells behavior and bacteria adhesion. In this review, we will first briefly present some of these surface treatments either chemical or physical and we explain the biological responses to titanium with a specific focus on adverse immune reactions. More recently, a new trend has emerged in titanium surface science with a focus on the crystalline phase of titanium dioxide and the associated biological responses. In these recent studies, rutile and anatase are the major two polymorphs used for biomedical applications. In the second part of this review, we consider this emerging topic of the control of the crystalline phase of titanium and discuss its potential biological impacts. More in-depth analysis of treatment-related surface crystalline changes can significantly improve the control over titanium/host tissue interface and can result in considerable decreases in implant-related complications, which is currently a big burden on the healthcare system.

Re-epithelialization: a key element in tracheal tissue engineering

Trachea-tissue engineering is a thriving new field in regenerative medicine that is reaching maturity and yielding numerous promising results. In view of the crucial role that the epithelium plays in the trachea, re-epithelialization of tracheal substitutes has gradually emerged as the focus of studies in tissue-engineered trachea. Recent progress in our understanding of stem cell biology, growth factor interactions and transplantation immunobiology offer the prospect of optimization of a tissue-engineered tracheal epithelium. In addition, advances in cell culture technology and successful applications of clinical transplantation are opening up new avenues for the construction of a tissue-engineered tracheal epithelium. Therefore, this review summarizes current advances, unresolved obstacles and future directions in the reconstruction of a tissue-engineered tracheal epithelium.

cAMP Promotes Cell Migration Through Cell Junctional Complex Dynamics and Actin Cytoskeleton Remodeling: Implications in Skin Wound Healing

Stem cells have attracted great interest for their therapeutic capacity in tissue regeneration. Cyclic adenosine 3',5'-monophosphate (cAMP), existing in high concentration at wound sites, mediated various signaling pathways such as cytoskeleton dynamics, cell adhesion, and cell migration in stem cells, which suggest the critical roles of cAMP in the wound healing process through functional regulation of stem cells. However, the mechanisms behind the effect of cAMP on mouse embryonic stem cell (mESC) motility and its roles on skin wound healing remain to be fully elucidated. In the present study, 8-Bromo cAMP-treated mESCs showed significant wound closure and improved neovascularization. Moreover, 8-Bromo cAMP stimulated mESC migration into the wound bed. 8-Bromo cAMP also increased ESC motility in in vitro migration assay. 8-Bromo cAMP induced myosin light chain phosphorylation through Rac1 and Cdc42 signaling, which were involved in 8-Bromo cAMP-induced decrease in expression of junction proteins (connexin 43, E-cadherin, and occludin) at the plasma membrane. Subsequently, 8-Bromo cAMP induced the disruption of cell junctions (including gap junctions, adherens junctions, and tight junctions), which reduced the function of the gap junctions and cell adhesion. In addition, 8-Bromo cAMP-induced Rac1 and Cdc42 activation increased Arp3, TOCA, PAK, and N-WASP expression, but decreased cofilin phosphorylation level, which elicited actin cytoskeleton remodeling. In contrast to the control, 8-Bromo cAMP evoked a substantial migration of cells into the denuded area, which was blocked by the small interfering RNAs of the signaling pathway-related molecules or by inhibitors. In conclusion, cAMP enhanced the migration of mESCs through effective coordination of junctional disruption and actin cytoskeleton remodeling, which increased the wound healing capacity of ESCs.

Controlled implant/soft tissue interaction by nanoscale surface modifications of 3D porous titanium implants

Porous titanium implants are widely employed in the orthopaedics field to ensure good bone fixation. Recently, the use of porous titanium implants has also been investigated in artificial larynx development in a clinical setting. Such uses necessitate a better understanding of the interaction of soft tissues with porous titanium structures. Moreover, surface treatments of titanium have been generally evaluated in planar structures, while the porous titanium implants have complex 3 dimensional (3D) architectures. In this study, the determining factors for soft tissue integration of 3D porous titanium implants were investigated as a function of surface treatments via quantification of the interaction of serum proteins and cells with single titanium microbeads (300-500 μm in diameter). Samples were either acid etched or nanostructured by anodization. When the samples are used in 3D configuration (porous titanium discs of 2 mm thickness) in vivo (in subcutis of rats for 2 weeks), a better integration was observed for both anodized and acid etched samples compared to the non-treated implants. If the implants were also pre-treated with rat serum before implantation, the integration was further facilitated. In order to understand the underlying reasons for this effect, human fibroblast cell culture tests under several conditions (directly on beads, beads in suspension, beads encapsulated in gelatin hydrogels) were conducted to mimic the different interactions of cells with Ti implants in vivo. Physical characterization showed that surface treatments increased hydrophilicity, protein adsorption and roughness. Surface treatments also resulted in improved adsorption of serum albumin which in turn facilitated the adsorption of other proteins such as apolipoprotein as quantified by protein sequencing. The cellular response to the beads showed considerable difference with respect to the cell culture configuration. When the titanium microbeads were entrapped in cell-laden gelatin hydrogels, significantly more cells migrated towards the acid etched beads. In conclusion, the nanoscale surface treatment of 3D porous titanium structures can modulate in vivo integration by the accumulative effect of the surface treatment on several physical factors such as protein adsorption, surface hydrophilicity and surface roughness. The improved protein adsorption capacity of the treated implants can be further exploited by a pre-treatment with autologous serum to render the implant surface more bioactive. Titanium microbeads are a good model system to observe these effects in a 3D microenvironment and provide a better representation of cellular responses in 3D.

Titanium microbead-based porous implants: bead size controls cell response and host integration

Openly porous structures in implants are desirable for better integration with the host tissue. Sintered microbead-based titanium implants for oto-rhinolaryngology applications, which create an environment where the cells can migrate in the areas between the microbeads, are developed. This structure promotes fibrovascular tissue formation within the implant in vivo. In this study, it is determine to what extent these events can be controlled by changing the physical environment of the implants both in vitro and in vivo. By cell tracking, it is observed that the size of the beads and the distance between the neighboring beads significantly affect the ability of cells to develop cell-to-cell contacts and to bridge the pores. Live cell staining shows that as the bead size gets smaller, the probability to observe cells that fill the porous areas is higher. This also affects the initial attachment and distribution of the cells and collagen secretion by fibroblasts. Obtaining a fast coverage of the system also enables co-culture systems where, the number and the distribution of the second cell type are boosted by the presence of the first. This concept is utilized to increase the attachment of vascular endothelial cells by an initial layer of fibroblasts. By decreasing the bead diameter, the overall colonization of the implant can be significantly increased in vivo. The effect of bead size has a similar pattern both in rats and rabbits, with faster colonization of smaller bead-based structures. Using smaller beads would improve clinical outcomes as faster integration facilitates the attainment of functionality by the implant.

Femtosecond laser-induced micropattern and Ca/P deposition on Ti implant surface and its acceleration on early osseointegration

Surface microstructure and chemical composition of the implant are very important for its osseointegration in vivo. In this paper, a hierarchical micropattern covered with calcium phosphate (Ca/P phase) was obtained on titanium (Ti) implant surface by femtosecond lasers (FSL) irradiation in hydroxyapatite suspension. The hierachical micropattern as well as Ca/P phase increased osteoblastic cell adhesion. Higher expression of osteogenic markers (osteocalcin, osteopontin, and runt related transcription factor-2) on the surface treated by FSL of 2.55 J/cm(2) indicated the favorable effect of laser treatment on cell differentiation. In vivo studies were carried out to evaluate the effect of laser treatment and Ca/P deposition on the osseointegration. It showed that the binding capacity between bone and FSL-treated Ti implants was obviously stronger than that between bone and polished or sand blasting and acid etching (SLA) Ti implants. Bone trabecula surrounded the FSL-treated implants without fibrous tissue after 8-week implantation. Also, higher bone mineral density was seen surrounding the FSL-treated implants. Our in vitro and in vivo studies demonstrated that the FSL induced micropattern and Ca/P phase had positive effects on the acceleration of early osseointegration of Ti implants with bone tissue.

Engineering functional epithelium for regenerative medicine and in vitro organ models: a review

Recent advances in the fields of microfabrication, biomaterials, and tissue engineering have provided new opportunities for developing biomimetic and functional tissues with potential applications in disease modeling, drug discovery, and replacing damaged tissues. An intact epithelium plays an indispensable role in the functionality of several organs such as the trachea, esophagus, and cornea. Furthermore, the integrity of the epithelial barrier and its degree of differentiation would define the level of success in tissue engineering of other organs such as the bladder and the skin. In this review, we focus on the challenges and requirements associated with engineering of epithelial layers in different tissues. Functional epithelial layers can be achieved by methods such as cell sheets, cell homing, and in situ epithelialization. However, for organs composed of several tissues, other important factors such as (1) in vivo epithelial cell migration, (2) multicell-type differentiation within the epithelium, and (3) epithelial cell interactions with the underlying mesenchymal cells should also be considered. Recent successful clinical trials in tissue engineering of the trachea have highlighted the importance of a functional epithelium for long-term success and survival of tissue replacements. Hence, using the trachea as a model tissue in clinical use, we describe the optimal structure of an artificial epithelium as well as challenges of obtaining a fully functional epithelium in macroscale. One of the possible remedies to address such challenges is the use of bottom-up fabrication methods to obtain a functional epithelium. Modular approaches for the generation of functional epithelial layers are reviewed and other emerging applications of microscale epithelial tissue models for studying epithelial/mesenchymal interactions in healthy and diseased (e.g., cancer) tissues are described. These models can elucidate the epithelial/mesenchymal tissue interactions at the microscale and provide the necessary tools for the next generation of multicellular engineered tissues and organ-on-a-chip systems.

Multi-scale modification of metallic implants with pore gradients, polyelectrolytes and their indirect monitoring in vivo

Metallic implants, especially titanium implants, are widely used in clinical applications. Tissue in-growth and integration to these implants in the tissues are important parameters for successful clinical outcomes. In order to improve tissue integration, porous metallic implants have being developed. Open porosity of metallic foams is very advantageous, since the pore areas can be functionalized without compromising the mechanical properties of the whole structure. Here we describe such modifications using porous titanium implants based on titanium microbeads. By using inherent physical properties such as hydrophobicity of titanium, it is possible to obtain hydrophobic pore gradients within microbead based metallic implants and at the same time to have a basement membrane mimic based on hydrophilic, natural polymers. 3D pore gradients are formed by synthetic polymers such as Poly-L-lactic acid (PLLA) by freeze-extraction method. 2D nanofibrillar surfaces are formed by using collagen/alginate followed by a crosslinking step with a natural crosslinker (genipin). This nanofibrillar film was built up by layer by layer (LbL) deposition method of the two oppositely charged molecules, collagen and alginate. Finally, an implant where different areas can accommodate different cell types, as this is necessary for many multicellular tissues, can be obtained. By, this way cellular movement in different directions by different cell types can be controlled. Such a system is described for the specific case of trachea regeneration, but it can be modified for other target organs. Analysis of cell migration and the possible methods for creating different pore gradients are elaborated. The next step in the analysis of such implants is their characterization after implantation. However, histological analysis of metallic implants is a long and cumbersome process, thus for monitoring host reaction to metallic implants in vivo an alternative method based on monitoring CGA and different blood proteins is also described. These methods can be used for developing in vitro custom-made migration and colonization tests and also be used for analysis of functionalized metallic implants in vivo without histology.

The application of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) scaffolds for tendon repair in the rat model

Tendon injuries and defects present a substantial burden to global healthcare economies. There are no synthetic/biosynthesised implants available which can restore full function or match the mechanical properties of native tendon. Therefore, poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) was investigated for its utility as a scaffold in a rat Achilles tendon repair model. Porous PHBHHx tubes and fibres were prepared with particle leaching and extrusion methods, respectively. Collagen gels reinforced by polymer fibres were inserted into the lumen of scaffold tubes to create the operational scaffold unit. Mechanical testing demonstrated that PHBHHx scaffolds had comparable mechanical properties to rat tendon, with maximal loads of 23.73 ± 1.08 N, compared to 17.35 ± 1.76 N in undamaged rat Achilles tendon. Sprague-Dawley (SD) rats were split into four experimental groups: control, PHBHHx scaffold only, PHBHHx scaffold and collagen, PHBHHx scaffold, collagen and tenocyte compositions for implantation to repair an induced Achilles tendon defect. No secondary immune response to PHBHHx was observed over a 40 days period of implantation. Movement was restored in PHBHHx scaffold-collagen-tenocyte recipient rats at an earlier time point than in other experimental groups, with complete load-bearing and function returning 20 days post-surgery as determined by the Achilles Functional Index. In vitro testing of tendon constructs after 40 days demonstrated reductions in PHBHHx molecular weight and polydispersity index accompanied by an increase in mean chain length indicating degradation of smaller polymer chain subunits. Similarly a reduction in PHBHHx tube ultimate tensile strength and elastic modulus was observed. Histological analysis provided evidence of tissue remodelling and cell alignment. In summary, PHBHHx scaffolds have been successfully applied in an in vivo tendon repair model raising promise for future utility in tissue engineering applications.