Engineering superficial zone features in tissue engineered cartilage

Recent Advances in "Functional Engineering of Articular Cartilage Zones by Polymeric Biomaterials Mediated with Physical, Mechanical, and Biological/Chemical Cues"

Articular cartilage (AC) plays an unquestionable role in joint movements but unfortunately the healing capacity is restricted due to its avascular and acellular nature. While cartilage tissue engineering has been lifesaving, it is very challenging to remodel the complex cartilage composition and architecture with gradient physio-mechanical properties vital to proper tissue functions. To address these issues, a better understanding of the intrinsic AC properties and how cells respond to stimuli from the external microenvironment must be better understood. This is essential in order to take one step closer to producing functional cartilaginous constructs for clinical use. Recently, biopolymers have aroused much attention due to their versatility, processability, and flexibility because the properties can be tailored to match the requirements of AC. This review highlights polymeric scaffolds developed in the past decade for reconstruction of zonal AC layers including the superficial zone, middle zone, and deep zone by means of exogenous stimuli such as physical, mechanical, and biological/chemical signals. The mimicked properties are reviewed in terms of the biochemical composition and organization, cell fate (morphology, orientation, and differentiation), as well as mechanical properties and finally, the challenges and potential ways to tackle them are discussed.

Serum proteomic analysis of differentially expressed proteins and pathways involved in the mechanism of endemic osteoarthritis

Kashin-Beck disease (KBD) is a chronic and endemic osteochondral disease and the etiology and pathogenic mechanism of KBD are still unknown. This study aimed to elucidate and screen KBD-associated proteins, which were differentially expressed between KBD patients and healthy controls. We combined protein fractionation and liquid chromatography-tandem mass spectrometry (LC-MS/MS) with a high-resolution mass spectrometer coupled with tandem mass tags (TMTs) to quantitatively analyze and screen KBD-associated proteins, which were differentially expressed between KBD patients and healthy controls. In addition, we used parallel reaction monitoring (PRM) to quantify proteins in serum from patients with KBD and healthy controls in order to verify the differentially expressed proteins in patients with KBD. We identified 224 differentially expressed proteins, including 11 up-regulated and 213 down-regulated proteins. Catalase (CAT) was observed to be significantly elevated in patients with KBD compared with control patients. Further, the fold difference of CAT is significantly elevated in PRM compared with label-free quantification. The results in this study suggest that CAT may be the reflection of the dynamic nature of KBD and could be considered as a novel pathogenic indicator for patients with KBD.

Label-free quantification of soft tissue alignment by polarized Raman spectroscopy

The organization of proteins is an important determinant of functionality in soft tissues. However, such organization is difficult to monitor over time in soft tissue with complex compositions. Here, we establish a method to determine the alignment of proteins in soft tissues of varying composition by polarized Raman spectroscopy (PRS). Unlike most conventional microscopy methods, PRS leverages non-destructive, label-free sample preparation. PRS data from highly aligned muscle layers were utilized to derive a weighting function for aligned proteins via principal component analysis (PCA). This trained weighting function was used as a master loading function to calculate a principal component score (PC1 Score) as a function of polarized angle for tendon, dermis, hypodermis, and fabricated collagen gels. Since the PC1 Score calculated at arbitrary angles was insufficient to determine level of alignment, we developed an Amplitude Alignment Metric by fitting a sine function to PC1 Score with respect to polarized angle. We found that our PRS-based Amplitude Alignment Metric can be used as an indicator of level of protein alignment in soft tissues in a non-destructive manner with label-free preparation and has similar discriminatory capacity among isotropic and anisotropic samples compared to microscopy-based image processing method. This PRS method does not require a priori knowledge of sample orientation nor composition and appears insensitive to changes in protein composition among different tissues. The Amplitude Alignment Metric introduced here could enable convenient and adaptable evaluation of protein alignment in soft tissues of varying protein and cell composition. STATEMENT OF SIGNIFICANCE: Polarized Raman spectroscopy (PRS) has been used to characterize the of organization of soft tissues. However, most of the reported applications of PRS have been on collagen-rich tissues and reliant on intensities of collagen-related vibrations. This work describes a PRS method via a multivariate analysis to characterize alignment in soft tissues composed of varying proteins. Of note, the highly aligned muscle layer of mouse skin was used to train a master function then applied to other soft tissue samples, and the degree of anisotropy in the PRS response was evaluated to obtain the level of alignment in tissues. We have demonstrated that this method supports convenient and adaptable evaluation of protein alignment in soft tissues of varying protein and cell composition.

Synthetic PVA Osteochondral Implants for the Knee Joint: Mechanical Characteristics During Simulated Gait

BACKGROUND

Although polyvinyl alcohol (PVA) implants have been developed and used for the treatment of femoral osteochondral defects, their effect on joint contact mechanics during gait has not been assessed.

PURPOSE/HYPOTHESIS

The purpose was to quantify the contact mechanics during simulated gait of focal osteochondral femoral defects and synthetic PVA implants (10% and 20% by volume of PVA), with and without porous titanium (pTi) bases. It was hypothesized that PVA implants with a higher polymer content (and thus a higher modulus) combined with a pTi base would significantly improve defect-related knee joint contact mechanics.

STUDY DESIGN

Controlled laboratory study.

METHODS

Four cylindrical implants were manufactured: 10% PVA, 20% PVA, and 10% and 20% PVA disks mounted on a pTi base. Devices were implanted into 8 mm-diameter osteochondral defects created on the medial femoral condyles of 7 human cadaveric knees. Knees underwent simulated gait and contact stresses across the tibial plateau were recorded. Contact area, peak contact stress, the sum of stress in 3 regions of interest across the tibial plateau, and the distribution of stresses, as quantified by tracking the weighted center of contact stress throughout gait, were computed for all conditions.

RESULTS

An osteochondral defect caused a redistribution of contact stress across the plateau during simulated gait. Solid PVA implants did not improve contact mechanics, while the addition of a porous metal base led to significantly improved joint contact mechanics. Implants consisting of a 20% PVA disk mounted on a pTi base significantly improved the majority of contact mechanics parameters relative to the empty defect condition.

CONCLUSION

The information obtained using our cadaveric test system demonstrated the mechanical consequences of femoral focal osteochondral defects and provides biomechanical support to further pursue the efficacy of high-polymer-content PVA disks attached to a pTi base to improve contact mechanics.

CLINICAL RELEVANCE

As a range of solutions are explored for the treatment of osteochondral defects, our preclinical cadaveric testing model provides unique biomechanical evidence for the continued investigation of novel solutions for osteochondral defects.

Comparison of the major cell populations among osteoarthritis, Kashin-Beck disease and healthy chondrocytes by single-cell RNA-seq analysis

Chondrocytes are the key target cells of the cartilage degeneration that occurs in Kashin–Beck disease (KBD) and osteoarthritis (OA). However, the heterogeneity of articular cartilage cell types present in KBD and OA patients and healthy controls is still unknown, which has prevented the study of the pathophysiology of the mechanisms underlying the roles of different populations of chondrocytes in the processes leading to KBD and OA. Here, we aimed to identify the transcriptional programmes and all major cell populations in patients with KBD, patients with OA and healthy controls to identify the markers that discriminate among chondrocytes in these three groups. Single-cell RNA sequencing was performed to identify chondrocyte populations and their gene signatures in KBD, OA and healthy cells to investigate their differences as related to the pathogenetic mechanisms of these two osteochondral diseases. We performed immunohistochemistry and quantitative reverse-transcription PCR (qRT-PCR) assays to validate the markers for chondrocyte population. Ten clusters were labelled by cell type according to the expression of previously described markers, and one novel population was identified according to the expression of a new set of markers. The homeostatic and mitochondrial chondrocyte populations, which were identified by the expression of the unknown markers MT1X and MT2A and MT-ND1 and MT-ATP6, were markedly expanded in KBD. The regulatory chondrocyte population, identified by the expression of CHI3L1, was markedly expanded in OA. Our study allows us to better understand the heterogeneity of chondrocytes in KBD and OA and provides new evidence of differences in the pathogenetic mechanisms between these two diseases.

Spatially patterned microribbon-based hydrogels induce zonally-organized cartilage regeneration by stem cells in 3D

Regenerating cartilage with biomimetic zonal organization, which is critical for tissue function, remains a great challenge. The objective of this study was to evaluate the potential of spatially-patterned, multi-compositional, macroporous, extracellular matrix-based microribbon (µRB) µRB scaffolds to regenerate cartilage with biochemical, mechanical, and morphological zonal organization by mesenchymal stem cells (MSCs) compared to conventional multi-layer nanoporous hydrogels. MSCs were seeded in either trilayer microribbon (µRB) or hydrogel (HG) scaffolds that were composed of layered biomaterial compositions that had been chosen for their ability to differentiate MSCs into chondrocytes with zonal properties. To mimic the aligned collagen morphology in the superficial layer of native cartilage, an additional experimental group added MSC-laden aligned µRBs to the surface of the superficial layer of a µRB trilayer. Tuning µRB alignment and compositions in different zones led to zonal-specific responses of MSCs to create neocartilage with zonal biochemical, morphological, and mechanical properties, while trilayer HGs led to minimal cartilaginous deposition overall. Trilayer µRBs created neocartilage exhibiting significant increases in compressive modulus (up to 456 kPa) and > 4-fold increase in sGAG production from superficial to deep zones. Aligned gelatin µRBs in the superficial zone further enhanced biomimetic mimicry of the produced neocartilage by leading to robust collagen deposition and superficial zone protein production. STATEMENT OF SIGNIFICANCE: Regenerating cartilage with zonal organization using mesenchymal stem cells (MSCs) remains a great challenge. We developed a spatially-patterned, gradient, macroporous, trilayer microribbon (µRB) scaffold that we used to engineer MSC-based neocartilage with zonal trends that match native cartilage in many aspects, including collagen, sGAG, superficial zone protein, and compressive moduli. This is in direct contrast to conventional trilayer nanoporous hydrogels which led to minimal cartilage deposition and weak mechanical properties. It took only 21 days for MSC-seeded trilayer µRB scaffolds to reach cartilage-mimicking compressive moduli without requiring high cell seeding density, which has never been reported before. While this paper focuses on cartilage zonal organization, gradient µRB scaffolds can be used to repair other tissue interfaces such as osteochondral defects.

Effect of joint mimicking loading system on zonal organization into tissue-engineered cartilage

Cartilage tissue engineering typically involves the combination of a biodegradable polymeric support material with chondrocytes. The culture environment in which cell–material constructs are created and stored is an important factor. The aim of the present study was to investigate the effects of combined stimuli on cartilage zonal organization which is important to maintain cartilage functions such as lubrication and cushion. For that purpose, we developed a joint mimicking loading system which was composed of compression and shear stress. To mimic the joint loading condition, we manufactured a stimuli system that has a device similar to the shape of a femoral condyle in human knee. The fibrin/hyaluronic acid mixture with chondrocytes were dropped into support made of silicon, and placed under the device. The cartilage explants were stimulated with the joint mimicking loading system for 1 hour per day over the course of 4 weeks. The amounts of GAG and collagen in the stimulated tissue were more than that of the static cultured tissue. Cells and collagen were arranged horizontally paralleled to the surface by stimuli, while it did not happen in the control group. The results of this study suggests that mechanical load exerting in the joint play a crucial role in stimulation of extracellular matrix (ECM) production as well as its functional rearrangement.

Adherent agarose mold cultures: An in vitro platform for multi-factorial assessment of passaged chondrocyte redifferentiation

Generating the best possible bioengineered cartilage from passaged chondrocytes requires culture condition optimization. In this study, the use of adherent agarose mold (adAM) cultures to support redifferentiation of passaged twice (P2) chondrocytes and serve as a scalable platform to assess the effect of growth factor combinations on proteoglycan accumulation by cells was examined. By 2 days in adAM culture, bovine P2 cells were partially redifferentiated as demonstrated by regression of actin-based dedifferentiation signalling and fibroblast matrix and contractile gene expression. By day 10, aggrecan and type II collagen gene expression were significantly increased in adAM cultured cells. At day 20, a continuous layer of cartilage tissue was observed. There was no evidence of tissue contraction by P2 cells in adAM cultures. The matrix properties of the resultant tissue as well as proteoglycan 4 (PRG4) secreted by the cells were dependent on the initial cell seeding density. AdAM cultures were scalable and culture within small 3 mm diameter adAM allowed for multi-factorial assessment of growth factors on proteoglycan accumulation by human P2 chondrocytes. Although there was a patient specific response in proteoglycan accumulation to the various cocktail combinations, the cocktail consisting of 2 ng/ml TGFβ1, 10 ng/ml FGF2, and 250 ng/ml FGF18 resulted in a consistent increase in alcian blue tissue staining. Additional studies will be required to identify the optimal conditions to bioengineer articular cartilage tissue for clinical use. However, the results to date suggest that adAM cultures may be suitable to use for high throughput assessment. © 2018 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:2392-2405, 2018.

Cell Patterning Method on a Clinically Ubiquitous Culture Dish Using Acoustic Pressure Generated From Resonance Vibration of a Disk-Shaped Ultrasonic Transducer

Cell patterning methods have been previously reported for cell culture. However, these methods use inclusions or devices that are not used in general cell culture and that might affect cell functionality. Here, we report a cell patterning method that can be conducted on a general cell culture dish without any inclusions by employing a resonance vibration of a disk-shaped ultrasonic transducer located under the dish. A resonance vibration with a single nodal circle patterned C2C12 myoblasts into a circular shape on the dish with 10-min exposure of the vibration with maximum peak-peak amplitude of 10 μm[Formula: see text]. Furthermore, the relationship between the amplitude distribution of the transducer and the cell density in the patterned sample could be expressed as a linear function, and there was a clear threshold of amplitude for cell adhesion. To evaluate the cell function of the patterned cells, we conducted proliferation and protein assays at 120-h culture after patterning. Our results showed that the cell proliferation rate did not decrease and the expression of cellular proteins was unchanged. Thus, we conclude, this method can successfully pattern cells in the clinically ubiquitous culture dish, while maintaining cell functionality.

Regulation of lubricin for functional cartilage tissue regeneration: a review

Background

Lubricin is chondrocyte-secreted glycoprotein that primarily conducts boundary lubrication between joint surfaces. Besides its cytoprotective function and extracellular matrix (ECM) attachment, lubricin is recommended as a novel biotherapeutic protein that restore functional articular cartilage. Likewise, malfunction of lubrication in damaged articular cartilage caused by complex and multifaceted matter is a major concern in the field of cartilage tissue engineering.

Main body

Although a noticeable progress has been made toward cartilage tissue regeneration through numerous approaches such as autologous chondrocyte implantation, osteochondral grafts, and microfracture technique, the functionality of engineered cartilage is a challenge for complete reconstruction of cartilage. Thus, delicate modulation of lubricin along with cell/scaffold application will expand the research on cartilage tissue engineering.

Conclusion

In this review, we will discuss the empirical analysis of lubricin from fundamental interpretation to the practical design of gene expression regulation.

Hydrogels for Cartilage Regeneration, from Polysaccharides to Hybrids

The aims of this paper are: (1) to review the current state of the art in the field of cartilage substitution and regeneration; (2) to examine the patented biomaterials being used in preclinical and clinical stages; (3) to explore the potential of polymeric hydrogels for these applications and the reasons that hinder their clinical success. The studies about hydrogels used as potential biomaterials selected for this review are divided into the two major trends in tissue engineering: (1) the use of cell-free biomaterials; and (2) the use of cell seeded biomaterials. Preparation techniques and resulting hydrogel properties are also reviewed. More recent proposals, based on the combination of different polymers and the hybridization process to improve the properties of these materials, are also reviewed. The combination of elements such as scaffolds (cellular solids), matrices (hydrogel-based), growth factors and mechanical stimuli is needed to optimize properties of the required materials in order to facilitate tissue formation, cartilage regeneration and final clinical application. Polymer combinations and hybrids are the most promising materials for this application. Hybrid scaffolds may maximize cell growth and local tissue integration by forming cartilage-like tissue with biomimetic features.

Non-linear optical microscopy as a novel quantitative and label-free imaging modality to improve the assessment of tissue-engineered cartilage

OBJECTIVE

Current systems to evaluate outcomes from tissue-engineered cartilage (TEC) are sub-optimal. The main purpose of our study was to demonstrate the use of second harmonic generation (SHG) microscopy as a novel quantitative approach to assess collagen deposition in laboratory made cartilage constructs.

METHODS

Scaffold-free cartilage constructs were obtained by condensation of in vitro expanded Hoffa's fat pad derived stromal cells (HFPSCs), incubated in the presence or absence of chondrogenic growth factors (GF) during a period of 21 d. Cartilage-like features in constructs were assessed by Alcian blue staining, transmission electron microscopy (TEM), SHG and two-photon excited fluorescence microscopy. A new scoring system, using second harmonic generation microscopy (SHGM) index for collagen density and distribution, was adapted to the existing "Bern score" in order to evaluate in vitro TEC.

RESULTS

Spheroids with GF gave a relative high Bern score value due to appropriate cell morphology, cell density, tissue-like features and proteoglycan content, whereas spheroids without GF did not. However, both TEM and SHGM revealed striking differences between the collagen framework in the spheroids and native cartilage. Spheroids required a four-fold increase in laser power to visualize the collagen matrix by SHGM compared to native cartilage. Additionally, collagen distribution, determined as the area of tissue generating SHG signal, was higher in spheroids with GF than without GF, but lower than in native cartilage.

CONCLUSION

SHG represents a reliable quantitative approach to assess collagen deposition in laboratory engineered cartilage, and may be applied to improve currently established scoring systems.

Multiscale Biofabrication of Articular Cartilage: Bioinspired and Biomimetic Approaches

Articular cartilage is the load-bearing tissue found inside all articulating joints of the body. It vastly reduces friction and allows for smooth gliding between contacting surfaces. The structure of articular cartilage matrix and cellular composition is zonal and is important for its mechanical properties. When cartilage becomes injured through trauma or disease, it has poor intrinsic healing capabilities. The spectrum of cartilage injury ranges from isolated areas of the joint to diffuse breakdown and the clinical appearance of osteoarthritis. Current clinical treatment options remain limited in their ability to restore cartilage to its normal functional state. This review focuses on the evolution of biomaterial scaffolds that have been used for functional cartilage tissue engineering. In particular, we highlight recent developments in multiscale biofabrication approaches attempting to recapitulate the complex 3D matrix of native articular cartilage tissue. Additionally, we focus on the application of these methods to engineering each zone of cartilage and engineering full-thickness osteochondral tissues for improved clinical implantation. These methods have shown the potential to control individual cell-to-scaffold interactions and drive progenitor cell differentiation into a chondrocyte lineage. The use of these bioinspired nanoengineered scaffolds hold promise for recreation of structure and function on the whole tissue level and may represent exciting new developments for future clinical applications for cartilage injury and restoration.

Cell encapsulation in a magnetically aligned collagen-GAG copolymer microenvironment

Engineered tissue microenvironments impart specialized cues that drive distinct cellular phenotypes and function. Microenvironments with defined properties, such as mechanical properties and fibril alignment, can elicit specific cellular responses that emulate those observed in vivo. Collagen- and glycosaminoglycan (GAG)-based tissue matrices have been popularized due to their biological ubiquity in a broad range of tissues and the ability to tune structure and mechanical properties through a variety of processes. Here, we investigate the combined effects of static magnetic fields, and GAG and cell encapsulation, on the structure (e.g. collagen fibril orientation) and material properties of collagen matrices. We found that magnetic fields align the collagen-GAG matrix, alter equilibrium mechanical properties and provide a method for encapsulating cells within a three-dimensional aligned matrix. Cells are encapsulated prior to polymerization, allowing for controlled cell density and eliminating the need for cell seeding. Increased relative GAG concentrations reduced the ability to magnetically align collagen fibrils, in part through a mechanism involving increased viscosity and polymerization time of the collagen-GAG solution. This work provides a functional design space for the development of pure collagen and hybrid collagen-GAG matrices in the presence of magnetic fields. Additionally, this work shows that magnetic fields are effective for the fabrication of collagen constructs with controlled fibril orientation, and can be coupled with GAG incorporation to modulate mechanical properties and the response of embedded cells.

Bioinspired scaffolds for osteochondral regeneration

Osteochondral defects are difficult to treat because the articular cartilage and the subchondral bone have dissimilar characteristics and abilities to regenerate. Bioinspired scaffolds are designed to mimic structural and biological cues of the native osteochondral unit, supporting both cartilaginous and subchondral bone repair and the integration of the newly formed osteochondral matrix with the surrounding tissues. The aim of this review is to outline fundamental requirements and strategies for the development of biomimetic scaffolds reproducing the unique and multifaceted anatomical structure of the osteochondral unit. Recent progress in preclinical animal studies using bilayer and multilayer scaffolds, together with continuous gradient scaffolds will be discussed and placed in a translational perspective with data emerging from their clinical application to treat osteochondral defects in patients.

Strategies for replicating anatomical cartilaginous tissue gradient in engineered intervertebral disc

A critical challenge in fabricating a load bearing tissue, such as an intervertebral disc, is to simulate cellular and matrix alignment and anisotropy, as well as a specific biochemical gradient. Towards this goal, multilamellar silk fibroin scaffolds having criss-cross fibrous orientation were developed, where silk fibers in inner layers were crosslinked with bioactive molecule chondroitin sulfate. Upon culturing goat articular chondrocytes under static and dynamic conditions, lamellar scaffold architecture guided alignment of cells and the newly synthesized extracellular matrix (ECM) along the silk fibers. The dynamic culture conditions further improved the cellular metabolic rate and ECM production. Further the synergistic effect of chemical composition of scaffold and hydrodynamic environment of bioreactor contributed in developing a tissue gradient within the constructs, with an inner region rich in collagen II, glycosaminoglycan (GAG), and stiffer in compression, whereas an outer region rich in collagen I and stiffer in tension. Therefore, a unique combination of chemical and physical parameters of engineered constructs and dynamic culture conditions provides a promising starting point to further improve the system towards replicating the anatomical structure, composition gradient, and function of intervertebral disc tissue.

Comparative analysis of osteogenic/chondrogenic differentiation potential in primary limb bud-derived and C3H10T1/2 cell line-based mouse micromass cultures

Murine micromass models have been extensively applied to study chondrogenesis and osteogenesis to elucidate pathways of endochondral bone formation. Here we provide a detailed comparative analysis of the differentiation potential of micromass cultures established from either BMP-2 overexpressing C3H10T1/2 cells or mouse embryonic limb bud-derived chondroprogenitor cells, using micromass cultures from untransfected C3H10T1/2 cells as controls. Although the BMP-2 overexpressing C3H10T1/2 cells failed to form chondrogenic nodules, cells of both models expressed mRNA transcripts for major cartilage-specific marker genes including Sox9, Acan, Col2a1, Snorc, and Hapln1 at similar temporal sequence, while notable lubricin expression was only detected in primary cultures. Furthermore, mRNA transcripts for markers of osteogenic differentiation including Runx2, Osterix, alkaline phosphatase, osteopontin and osteocalcin were detected in both models, along with matrix calcification. Although the adipogenic lineage-specific marker gene FABP4 was also expressed in micromass cultures, Oil Red O-positive cells along with PPARγ2 transcripts were only detected in C3H10T1/2-derived micromass cultures. Apart from lineage-specific marker genes, pluripotency factors (Nanog and Sox2) were also expressed in these models, reflecting on the presence of various mesenchymal lineages as well as undifferentiated cells. This cellular heterogeneity has to be taken into consideration for the interpretation of data obtained by using these models.