“Molded” rods of macroporous polymer for preparative separations of biological products

Preparation and characterization of alkyl methacrylate-based monolithic columns for capillary gas chromatography applications

Gas chromatography (GC) is considered the least common application of both polymer and silica-based monolithic columns. This study describes the fabrication of alkyl methacrylate monolithic materials for use as stationary phases in capillary gas chromatography. Following the deactivation of the capillary surface with 3-(trimethoxysilyl)propyl methacrylate (TMSM), the monoliths were formed by the co-polymerization of either hexyl methacrylate (HMA) or lauryl methacrylate (LMA) with different percentage of ethylene glycol dimethacrylate (EDMA) in presence of an initiator (azobisisobutyronitrile, AIBN) and a mixture of porogens include 1-propanol, 1,4-butanediol and water. The monoliths were prepared in 500mm length capillaries possessing inner diameters of 250μm. The efficiencies of the monolithic columns for low molecular weight compounds significantly improved as the percentage of crosslinker was increased, because of the greater proportion of pores less than 50nm. The columns containing lower percentages of crosslinker were able to rapidly separate a series of 8 alkane members in 0.7min, but the separation was less efficient for the light alkanes. Columns prepared with the lauryl methacrylate monomer yielded a different morphology for the monolith-interconnected channels. The channels were more branched, which increased the separation time, and unlike the other columns, allowed for temperature programming.

Ring-opening metathesis polymerization-derived monolithic strong anion exchangers for the separation of 5'-phosphorylated oligodeoxythymidylic acids fragments

Ring-opening metathesis polymerization (ROMP) derived monoliths were prepared from 5-norborn-2-enemethyl bromide (NBE-CH(2)Br) and tris(5-norborn-2-enemethoxy)methylsilane ((NBE-CH(2)O)(3)SiCH(3)) within the confines of surface-silanized borosilicate columns (100 mm × 3 mm I.D.), applying Grubbs' first generation benzylidene-type catalyst [RuCl(2)(PCy(3))(2)(CHPh)]. Two monoliths of the same recipe were converted into strong anion-exchangers applying two different approaches. Monolith I was prepared by a two-step reaction of the poly(NBE-CH(2)-Br) moieties with diethyl amine forming a weak-anion exchanger followed by reaction (quaternization) with ethyl iodide. Monolith II was prepared via a single-step reaction of the poly(NBE-CH(2)-Br) moieties with triethyl amine. The resulting monolithic anion-exchangers prepared demonstrated a good aptitude for the anion-exchange separation of single-stranded nucleic acids (ss-DNA). However, monolith II showed superior separation efficiency compared to monolith I indicated by sharper analyte peaks and better resolution values for the 5'-phosphorylated oligodeoxythymidylic acids fragments. On monolith II, the seven fragments of [d(pT)(12-18)] were baseline separated in less than 9 min. The influence of the buffer pH on the separation efficiency was studied applying a phosphate (0.05 mol/L, pH 7 and 8) and Tris-HCl buffer (0.05 mol/L, pH 9), respectively.

Monolithic phases for ion chromatography

Monolithic media are continuing to increase in popularity in chromatographic applications, and the ongoing use of commercially available materials in ion chromatography (IC) has made monoliths a viable alternative to packed-bed columns for routine use. We discuss different strategies for the synthesis of polymeric and silica monoliths with ion-exchange functionality, such as direct incorporation of ion-exchange functionality during monolith preparation and different postpolymerization alterations such as grafting and coating. The formulations and strategies presented are focused on materials intended for use in IC. We also discuss strategies for materials characterization, with emphasis on nondestructive techniques for the characterization of monolith surface functionality, especially those with applicability to in situ analysis. Finally, we describe selected IC applications of polymeric and silica monoliths published from 2008 to 2010.

Comparison of thermal- and photo-polymerization of lauryl methacrylate monolithic columns for CEC

Lauryl methacrylate-based (LMA) monolithic columns for CEC, prepared using either thermal initiation or by UV-irradiation in the presence of AIBN have been compared. Thermal polymerization was carried out at 70 degrees C for 20 h. For UV initiation, the effects of the time exposure to UV light and irradiation energy were investigated. For each initiation process, the influence of composition of porogenic solvent (1,4-butanediol/1-propanol ratio) on the physical and electrochromatographic properties of the resulting monoliths was also evaluated. Photochemically lauryl methacrylate stationary phases initiated showed higher permeabilities and better efficiencies than those prepared by thermal initiation. After optimization of polymerization mixture, photopolymerized columns provided a permeability of 4.25 x 10(-13) m(2) and a minimum plate height of 13.4 microm for a mixture of polycyclic aromatic hydrocarbons. Similar column-to-column and batch-to-batch reproducibilities, with RSD values below 11.6 and 11.0 % for the thermal- and UV-initiated columns, respectively, were obtained.

Applications of polymethacrylate-based monoliths in high-performance liquid chromatography

Monolithic columns were introduced in the early 1990s and have become increasingly popular as efficient stationary phases for most of the important chromatographic separation modes. Monoliths are functionally distinct from porous particle-based media in their reliance on convective mass transport. This makes resolution and capacity independent of flow rate. Monoliths also lack a void volume. This eliminates eddy dispersion and permits high-resolution separations with extremely short flow paths. The analytical value of these features is the subject of recent reviews. Nowadays, among other types of rigid macroporous monoliths, the polymethacrylate-based materials are the largest and most examined class of these sorbents. In this review, the applications of polymethacrylate-based monolithic columns are summarized for the separation, purification and analysis of low and high molecular mass compounds in the different HPLC formats, including micro- and large-scale HPLC modes.

Preparation and characterization of long alkyl chain methacrylate-based monolithic column for capillary chromatography

This paper describes the fabrication of long alkyl chain methacrylate monolithic materials for using as stationary phases in capillary liquid chromatography. Following deactivation of the capillary surface with 3-(trimethoxysilyl)propyl methacrylate (gamma-MAPS), monoliths were formed by co-polymerisation of stearyl methacrylate (SMA) with ethylene glycol dimethacrylate (EDMA) in the presence of the initiator AIBN and a mixture of porogens including iso-amyl alcohol and 1,4-butanediol. The monoliths were prepared in 100 microm i.d. capillaries and the composition of the polymerisation mixtures were optimised in terms of the ratio of SMA/EDMA, the porogen composition and ratio of porogen to monomers. As the porogen weight fraction decreased, the microglobules became smaller and as expected, the total porosity decreased. In order to determine the usability of such materials, the column permeability K was measured by pumping water through the columns at different linear flow rates. Good results were obtained when these capillaries were used to separate mixtures of weak acids, neutral and basic compounds.

Comparison of a three-peptide separation by capillary electrochromatography, voltage-assisted liquid chromatography and nano-high-performance liquid chromatography

A mixture of three peptides was separated by capillary electrochromatography (CEC), nano-HPLC and voltage-assisted LC. In the latter case the charged analytes migrate through a neutral stationary phase driven by electrophoresis while their interaction with the stationary phase provides the basis for a chromatographic separation. The stationary phases used were poly(glycidyl methacrylate-co-ethylene dimethacrylate)-based monoliths that could be used directly as neutral "C1"-type columns for voltage-assisted LC and nano-HPLC, while their application in CEC became possible after derivatization of the epoxy groups with ionogenic N-ethylbutylamine functions. The separation of the peptide mixture was possible in all three modes. Highest plate numbers and resolutions were obtained under voltage-assisted conditions. The elution order showed dependencies on the charge density but also on the hydrophobicity of the peptides and was different in the three investigated chromatographic modes. The effect of changes in the ionic strength and the organic solvent content of the mobile phase on the resolution and the migration behavior of the peptides was investigated and showed the expected behavior. Voltage-assisted LC is suggested as an alternative to CEC for the separation of charged analytes by electrochromatography.

Preparation and HPLC applications of rigid macroporous organic polymer monoliths

Rigid porous polymer monoliths are a new class of materials that emerged in the early 1990s. These monolithic materials are typically prepared using a simple molding process carried out within the confines of a closed mold. For example, polymerization of a mixture comprising monomers, free-radical initiator, and porogenic solvent affords macroporous materials with large through-pores that enable applications in a rapid flow-through mode. The versatility of the preparation technique is demonstrated by its use with hydrophobic, hydrophilic, ionizable, and zwitterionic monomers. Several system variables can be used to control the porous properties of the monolith over a broad range and to mediate the hydrodynamic properties of the monolithic devices. A variety of methods such as direct copolymerization of functional monomers, chemical modification of reactive groups, and grafting of pore surface with selected polymer chains is available for the control of surface chemistry. Since all the mobile phase must flow through the monolith, the convection considerably accelerates mass transport within the molded material, and the monolithic devices perform well, even at very high flow rates. The applications of polymeric monolithic materials are demonstrated mostly on the separations in the HPLC mode, although CEC, gas chromatography, enzyme immobilization, molecular recognition, advanced detection systems, and microfluidic devices are also mentioned.

Development of rigid bidisperse porous microspheres for high-speed protein chromatography

Development of a high-performance stationary phase is an essential demand for high-speed separation of proteins by liquid chromatography. Based on a novel porogenic mode, that is, using superfine granules of calcium carbonate as solid porogen and a mixture of cyclohexanol and dodecanol as liquid porogen, a rigid spherical biporous poly(glycidyl methacrylate-co-ethylene dimethacrylate) matrix has been prepared by radical suspension-polymerization. The epoxide groups of the matrix were modified with diethylamine to afford the ionizable weak base 1-N,N-diethylamino-2-hydeoxypropy functionalities that are required for ion exchange chromatography. Results from scanning electron microscopy and mercury intrusion porosimetry measurements revealed that the matrix contained two families of pores, that is, micropores (10-90 nm) and macropores (180-4000 nm). Furthermore, the biporous medium possesses specific surface area as high as 91.3 m(2)/g. Because of the presence of the macropores that provided convective flow channels for the mobile phase, the dynamic adsorption capacity was found to be as high as 54.6 mg/g wet bead at 300 cm/h, approximately 63.2% of its static capacity. In addition, the column efficiency and dynamic binding capacity decreased only slightly with mobile-phase flow rate in the range of 300-3000 cm/h. These properties made the packed bed with the bidisperse porous matrix suitable for high-speed protein chromatography.

Porous polymer monoliths: an alternative to classical beads

Porous polymer monoliths are a new category of materials developed during the last decade. These materials are prepared using a simple molding process carried out within the confines of a closed mold. Polymerization of a mixture that typically contains monomers, free-radical initiator, and porogenic solvent affords macroporous materials with large through-pores that enable flow-through applications. The versatility of the preparation technique is demonstrated by its use with hydrophobic, hydrophilic, ionizable, and zwitterionic monomers. The porous properties of the monolith can be controlled over a broad range. These, in turn, determine the hydrodynamic properties of the devices that contain the molded media. Since all the mobile phase must flow through the monolith, the mass transport within the molded material is dominated very much by convection, and the monolithic devices perform well even at very high flow rates. The applications of monolithic materials are demonstrated on the chromatographic separation of biological compounds and synthetic polymers, electrochromatography, gas chromatography, enzyme immobilization, molecular recognition, and in advanced detection systems. Grafting of the pore walls with selected polymers leads to materials with completely changed surface chemistries.

Monolithic stationary phases for liquid chromatography and capillary electrochromatography

A monolithic stationary phase is the continuous unitary porous structure prepared by in situ polymerization or consolidation inside the column tubing and, if necessary, the surface is functionalized to convert it into a sorbent with the desired chromatographic binding properties [J. Chromatogr. A 855 (1999) 273]. Monolithic stationary phases have attracted considerable attention in liquid chromatography and capillary electrochromatography in recent years due to their simple preparation procedure, unique properties and excellent performance, especially for separation of biopolymers. This review summarizes the preparation, characterization and applications of the monolithic stationary phases. In addition, the disadvantages and limitations of the monolithic stationary phases are also briefly discussed.

Porous polymers and resins for biotechnological and biomedical applications

This review describes conventional and modern techniques of porous organic polymer synthesis. A huge variety of polymer architectures and functions can be gained by foaming, phase separation, imprinting or templating approaches. Several applications of porous polymers are discussed, focusing on biotechnological and biomedical applications, such as chromatography, protein synthesis, drug carrier systems, tissue engineering and others.

Urea-formaldehyde resin monolith as a new packing material for affinity chromatography

A urea-formaldehyde resin (UF) continuous bed has been prepared through in-situ condensation polymerization in a confined tube. The monolith is an agglomerate of 2-microm irregular particles. Nitrogen adsorption shows that the monolith has a bimodal pore size distribution. It has low resistance to flow. A dyed monolith is obtained through modification of the UF monolith with Cibacron blue F3GA. Although its dye concentration and dynamic capacity are low compared to Sepharose type affinity media, the dyed monolith can separate some proteins in the affinity mode of liquid chromatography.

Affinity membrane chromatography for the analysis and purification of proteins

Affinity chromatography is unique among separation methods as it is the only technique that permits the purification of proteins based on biological functions rather than individual physical or chemical properties. The high specificity of affinity chromatography is due to the strong interaction between the ligand and the proteins of interest. Membrane separation allows the processing of a large amount of sample in a relatively short time owing to its structure, which provides a system with rapid reaction kinetics. The integration of membrane and affinity chromatography provides a number of advantages over traditional affinity chromatography with porous-bead packed columns, especially with regard to time and recovery of activity. This review gives detailed descriptions of materials used as membrane substrates, preparation of basic membranes, coupling of affinity ligands to membrane supports, and categories of affinity membrane cartridges. It also summarizes the applications of cellulose/glycidyl methacrylate composite membranes for proteins separation developed in our laboratory.

Poly(glycidyl methacrylate-divinylbenzene-triallylisocyanurate) continuous-bed protein chromatography

A novel continuous bed with high dynamic adsorption capacity for protein has been developed. It is a macroporous poly(glycidyl methacrylate-divinylbenzene-triallylisocyanurate) rod prepared by in situ copolymerization in a chromatographic tube. The bed matrix contained epoxy groups, so diethylaminohydroxypropyl groups were coupled to the matrix, leading to an anion-exchange continuous bed. The component, specific surface area, and the pore structure of the bed matrix were characterized by Fourier transform infrared spectroscopy, BET method and scanning and transmission electron microscopies, respectively. The flow properties, column efficiency and the dynamic adsorption behavior of the bed were studied. The results show that the continuous bed, a ternary copolymer of glycidyl methacrylate (GMA), divinylbenzene (DVB) and triallylisocyanurate (TAIC) with a specific surface area of 56.4 m2/g, consisted of a three-dimensional structure made up of continuous clusters of microspheres (300 nm) and interconnected irregular pores. The rate of mass transfer is enhanced by the convection of the mobile phase through the pores. The dynamic adsorption isotherm of the anion-exchange column for bovine serum albumin was expressed by the Langmuir equation with a dynamic capacity as high as 76.0 mg/g. Moreover, the separation of proteins, i.e. lysozyme, hemoglobin and bovine serum albumin, is little affected by mobile-phase velocity up to 902.5 cm/h; it was completed within 5 min at 902.5 cm/h.

Construction of large-volume monolithic columns

Monolithic supports have become the subject of extensive study in the past years. Despite their advantageous features and many successful chromatographic applications in the analytical scale, only a very few examples of larger volume monoliths were described. In the case of GMA-EDMA monoliths, this can be attributed to the fact that due to the exothermic polymerization a pronounced temperature increase inside the monolith significantly affects the structure. The temperature increase depends on the thickness of the monolith, and consequently, there is an upper limit that allows the preparation of a unit with a uniform structure. In the present work, we have analyzed a heat release during the polymerization and have derived a mathematical model for the prediction of the maximal thickness of the monolithic annulus having a uniform structure. On the basis of the calculations, two annuluses of different diameters were polymerized and merged into a single monolithic unit with a volume of 80 mL. In addition, a special housing was designed to provide a uniform flow distribution in the radial direction over the entire monolith bed. It was shown that such a monolithic column exhibits flow-independent separation efficiency and dynamic binding capacity up to flow rates higher than 100 mL/min. The separation and loading times are in the range of a few minutes. The pressure drop on the column is linearly dependent on the flow rate and does not exceed 2.5 MPa at a flow rate of 250 ml/min.